Instruction/ maintenance manual of the product Concept 40 Clifford
Go to page of 25
Owner' s Manua l World-Clas s Aut o Securit y T M concep t 4 0.
All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; .
Table of Contents Standard Features of the Concept 4O . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 10 How to use your keychain remote control .
Table of Contents (cont.) How to interpret the LED status indicator . . . . . . . . . . . . . . . 16 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . 16 Remote controlled sensor adjustments . . . . . . . . . . . . . . . . 17 Remote controlled override of one or both sensor zones .
Standard Features of the Concept 4O ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Concept 4O (cont.) ✔ Remotely Adjustable Dual-Zone Proximity Sensor™ — With just a touch on the remote, you may, at any time or place, adjust and test the sensitivity of this microprocessor-controlled passenger compartment sensor.
Standard Features of the Concept 4O (cont.) ✔ Built-In Parking Light Flasher —Visually confirms door lock and system status. ✔ Remote Controlled Courtesy Lighting —For your personal safety and.
Standard Features of the Concept 4O (cont.) ✔ Remote Headlight Activation Capability — Remotely turn on the headlights to illuminate your way to and from your vehicle (requires an optional relay).
Standard Features of the Concept 4O (cont.) ✔ High-Output Insignia Siren — A loud yet compact siren designed exclusively by Clifford Electronics for far superior performance, features, reliability and even aesthetics to all other manufacturer’s look-alike, sound-alike sirens.
Standard Features of the Concept 4O (cont.) ✔ Patented Remote Control Code Learning — Just a few flicks of a switch lets you match to the system up to 4 different 12-channel Clifford remote controls. Just as easily, a lost or stolen remote control can be deleted from the system memory.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Concept 40 vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories.
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your Concept 40 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24).
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off.
Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning.
UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode.
FA CT™— False Alarm Control an d T est With FACT, you’ll never experience repeated false alarms. If the Insignia Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration.
Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. Other alarms require repeated trips back to the dealer.
Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2.
Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1–5 times, pause, then repeat the blink cycle 4 more times.
User-selectable features Your Concept 40 allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
EXAMPLE 1: Turn off Headlight Reminder: If you park your car and begin to exit while the headlights are still on, the Headlight Reminder feature is set to issue a warning sound to remind you to turn t.
4. Now look up the location on the table of siren duration. Note that it’s in column 3, row 5 (latched, center, latched, center, latched, center, wait for the 3-chirp/column 3 confirmation, then 5 momentary presses). After a brief pause, you’ll hear two chirps to confirm that the siren duration is now set to 60 seconds.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Row 1 1st momentary Add new remote to channel 1 info on.
An important point after buying a device Clifford Concept 40 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford Concept 40 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford Concept 40 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford Concept 40 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford Concept 40 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford Concept 40, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford Concept 40.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford Concept 40. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford Concept 40 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
