Instruction/ maintenance manual of the product bULLET II Clifford
Go to page of 20
Owne r ’ s Manua l World-Clas s Aut o Securit y T M bULLE T I I.
.
Table of Contents Standard Features of the Bullet II . . . . . . . . . . . . . . . . . . . 3 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 7 How to use your keychain remote control . . . . . . . . . . . . . . . . 7 What each button/channel does .
Table of Contents (cont.) Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Specific malfunction identification . . . . . . . . . . . . . . . . . . . . . 12 Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . .
Standard Features of the Bullet II ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Bullet II (cont.) ✔ Remote Door Locking and Unlocking — No more fumbling with keys in the dark or bad weather! A press of a button on the remote simultaneously arms your system and locks your vehicle’s power locks. Another press disarms and unlocks.
Standard Features of the Bullet II (cont.) ✔ Enhanced User-Selectable AutoArming™ — Automatically arms itself “passively” if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company).
Standard Features of the Bullet II (cont.) ✔ Patented Smart Prior Intrusion Attempt Alert — When you return to your vehicle and remotely disarm your Bullet II, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away.
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your Bullet II remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 15-16). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off.
Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning.
Valet mode Whenever the system is put in valet mode, all of the system’s security features are switched off. At various times, you will need to turn the system off.
AutoLock/AutoUnLock™ For your safety and that of your passengers, the vehicle doors will automatically lock the instant you turn on the ignition to start the engine (see User-selectable features on pages 15-16). When you turn the ignition off to shut down the engine, the AutoUnLock feature automatically unlocks the doors.
Automatic malfunction bypass To provide protection even if a component malfunctions, the system automatically bypasses any faulty point and arms all other triggers and sensors to provide the utmost possible protection until you can have the system serviced by your local Authorized Clifford Dealer.
Headlight Reminder If you turn the ignition off and open the driver’s door to exit the car without having turned off the headlights, you will be reminded to turn them off with a distinctive rapid, multi-chirp warning. If your vehicle already has a similar warning feature, you may turn off the Bullet II Headlight Reminder feature.
User-selectable features Your Bullet II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times.
Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a new remote to channel 2 (remote accessory) — 14 Press remote control button 2 2 chirps Bu.
Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself.
Bullet II is covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375 and other patents © Copyright Clifford Electronics, Inc.
An important point after buying a device Clifford bULLET II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford bULLET II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford bULLET II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford bULLET II you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford bULLET II will certainly help you make a decision on the purchase.
If you already are a holder of Clifford bULLET II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford bULLET II.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford bULLET II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford bULLET II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
