Instruction/ maintenance manual of the product D901C Clevo
Go to page of 100
.
.
Preface I Preface Notebook Computer D900C/D901C Service Manual.
Preface II Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor.
Preface III Preface About this Manual This manual is intended for service personnel who have comp leted sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic inform ation for servicing and/or upgrading components of the D900C/ D901C series notebook PC.
Preface IV Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to per- sons when using any electrical equipment: 1.
Preface V Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case an d the components could be damaged.
Preface VI Preface 4. A void interference. Keep the computer away from high capacity tr ansformers, electric motors, and other strong mag- netic fields. These can hinder proper performance and damage your data. 5. T ake care when using peripheral devices .
Preface VII Preface Battery Precautions • Only use batteries designed for this computer . The wrong battery type may explode, leak or damage the computer . • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twis ted) in any way .
Preface VIII Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro- gram.
Preface IX Preface Contents Introduction .............................................. 1-1 Overview ......................................................................................... 1-1 System Specifications ..................................
Preface X Preface DVI/ CRT ..................................................................................... B-19 Panel CON/ LED Indicator .......................................................... B-20 1394/ Card Reader (TI PCI7402) .............
Introduction Overview 1 - 1 1.Introduction 1: Introduction Overview This manual covers the information you need to service or upgrade the D900C/D901C series notebook computer. Infor- mation about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual .
Introduction 1 - 2 System Specifications 1.Introduction System Specifications Feature Specification Processor T ypes Intel® Core™ 2 Duo Processor LGA775 Package (775-pin) E6300 / E6400 65nm (65 Nanometer) Process T echnology 2MB On-die L2 Cache & 1066MHz FSB 1.
Introduction System Specifications 1 - 3 1.Introduction Video Card NVIDIA GeForceGo 7950 G TX (G71GM-UU +MXM IV) SLI Module PCI-Express Video Card Storage Options One Changeable 12.7 mm (h) Op tical Device Drive Bay (see “Optional” on page 1 - 5 ) Up to Three Changeable 9.
Introduction 1 - 4 System Specifications 1.Introduction I/O Port s Four USB 2.0 Ports One Mini-IEEE1394 Port One S-Video-Out Jack for TV & HDTV Output One DVI-Out Port (with DVI-Dual Link Support).
Introduction System Specifications 1 - 5 1.Introduction Physical Dimensions & Weight 397mm (w) * 298mm (d) * 51 ~ 60mm (h) 5.4kg Optional Optical Drive Module Options: DVD-Super Multi Drive Module External USB 1.
Introduction 1 - 6 External Locator - Top View with LCD Panel Open 1.Introduction External Locator - Top View with LCD Panel Open Figure 1 Top View 1. Optional Built-In PC Camera 2. LCD 3. LED Power & Communication Indicators 4. Built-In Microphone 5.
Introduction External Locator - Front & Rear Views 1 - 7 1.Introduction External Locator - Front & Rear Views Figure 2 Front Views 1. LCD Latches 2. Line-In Jack 3. S/PDIF-Out Jack 4. Microphone-In Jack 5. Headphone-Out Jack 6. S peakers Figure 3 Rear Views 1.
Introduction 1 - 8 External Locator - Left & Right Side View 1.Introduction External Locator - Left & Right Side View 3 1 5 2 4 6 7 8 9 Figure 4 Left Side View 1. External Monitor Port 2. S-Video-Out Jack 3. Cable (CA TV) Antenna Jack 4. RJ-1 1 Phone Jack 5.
Introduction External Locator - Bottom View 1 - 9 1.Introduction External Locator - Bottom View Figure 6 Bottom View 1. Battery (Secondary HDD Bay - HDD3) 2.
Introduction 1 - 10 Mainboard Overview - Top (Key Parts) 1.Introduction Mainboard Overview - Top (Key Parts) Figure 7 Mainboard Top Key Parts 1. WLAN Module Socket 2.
Introduction Mainboard Overview - Bottom (Key Parts) 1 - 11 1.Introduction Mainboard Overview - Bottom (Key Parts) Figure 8 Mainboard Bottom Key Parts 1. CPU Socket (no CPU installed) 2. VGA sockets 3. Memory Slots DDR So-DIMM 4. HDD Socket 5. KBC IC (H8S/ 21 1 1BV) 6.
Introduction 1 - 12 Mainboard Overview - Top (Connectors) 1.Introduction Mainboard Overview - Top (Connectors) Figure 9 Mainboard Top Connectors 1. CCD Cable Connector 2. LCD Connector 3. LED Connector 4. Wire Cable 2Pin Connector (M/B to MDC Module) 5.
Introduction Mainboard Overview - Bottom (Connectors) 1 - 13 1.Introduction Mainboard Overview - Bottom (Connectors) Figure 10 Mainboard Bottom Connectors 1. CPU Fan Cable Connector 2. RAM Fan Cable Connector 3. DC-In Jack 4. DVI-Out Port 5. S-Video-In Jack 6.
Introduction 1-1 4 1.Introduction.
Disassembly Overview 2 - 1 2.Disassembly 2: Disassembly Overview This chapter provides step-by-step instructions for disassembling the D900C/D901C series notebook’s parts and sub- systems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).
Disassembly 2-2O v e r v i e w 2.Disassembly NOTE : All disassembly procedures assume that the system is turned OFF , and disconnected from any power supply (the battery is removed too). Maintenance Tools The following tools are recommended when working on the notebook PC: • M3 Philips-head screwdriver • M2.
Disassembly Overview 2 - 3 2.Disassembly Maintenance Precautions The following precautions are a reminder. To avoid personal in jury or damage to the computer while performing a re- moval and/or replacement job, take the following precautions: 1. Don't drop it .
Disassembly 2 - 4 Disassembly Steps 2.Disassembly Disassembly Steps The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED. To remove the Battery: 1.
Disassembly Removing the Battery 2 - 5 2.Disassembly Removing the Battery 1. Turn the computer of f, and turn it over . 2. Loosen screws - . 3. Release the battery . 4. Lift the battery ( Figure b ) out of the bay as indicated. 4. Battery •3 S c r e w s 1 3 4 Figure 1 Battery Removal a.
Disassembly 2 - 6 Removing the Optical (CD/DVD) Device 2.Disassembly Removing the Optical (CD/DVD) Device 1. Turn of f the computer , and turn it over and remove the battery ( page 2 - 5 ). 2. Locate the hard disk bay cover and remove screws - , and remove the bay cover .
Disassembly Removing the Hard Disk Drive 2 - 7 2.Disassembly Removing the Hard Disk Drive The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.
Disassembly 2 - 8 Removing the Hard Disk Drive 2.Disassembly Removing the Hard Disk(s) in the Secondary HDD Bay 1. Tu rn off the computer , and turn it over and remove the battery . 2. The secondary hard disk bay is loca ted under the battery compartment.
Disassembly Removing the System Memory (RAM) 2 - 9 2.Disassembly Removing the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) DDR II (DDR2) supporting 533/667/800 MHz. The main memory ca n be expanded up to 4GB.
Disassembly 2 - 10 Removing the System Memory (RAM) 2.Disassembly 6. Gently pull the two release latches & on the sides of the memory socket in the direction indicated by the arrows ( Figure e ). 7. The RAM module will pop-up ( Figure f ), and you can then remove it.
Disassembly Removing the Processor 2 - 11 2.Disassembly Removing the Processor 1. Turn of f the computer , and turn it over , remove the battery ( page 2 - 5 ) and RAM fan ( page 2 - 9 ). 2. Locate the CPU heatsink and remove screws - from the heat sink in the order indicated on the label.
Disassembly 2 - 12 Removing the VGA Card 2.Disassembly Removing the VGA Card 1. Turn of f the computer , and turn it over and remove the battery ( page 2 - 5 ). 2. Locate the VGA bay cover and remove screws - . 3. Lift off the bay cover . 4. Remove screws - from the VGA card fans.
Disassembly Removing the VGA Card 2 - 13 2.Disassembly 8. Grip the handle and carefully lift the VGA card module in slot A. 9. If two VGA cards are installed, disconnect the SLI cable from the VGA card modules. 10. Carefully remove the VGA card modu le in slot B from the mainboard.
Disassembly 2 - 14 Removing the VGA Card 2.Disassembly Installing the VGA Card 1. Prepare to fit the VGA card into the slot by holding it at about a 30° angle. 2. The card needs to be fully into the slot, and the VGA card and socket have a guide-key and pin which align to allow the card to fit securely .
Disassembly Removing the Keyboard 2 - 15 2.Disassembly Removing the Keyboard 1. Turn of f the computer , and turn it over and remove the battery ( page 2 - 5 ). 2. Press the four keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).
Disassembly 2 - 16 Removing the Wireless LAN Module 2.Disassembly Removing the Wireless LAN Module 1. Turn of f the computer , and turn it over , remove the battery ( page 2 - 5 ) and keyboard ( page 2 - 15 ). 2. Remove screws - from the keyboard shielding .
Disassembly Removing the Bluetooth Module 2 - 17 2.Disassembly Removing the Bluetooth Module 1. Turn of f the computer , and turn it over , remove the battery ( page 2 - 5 ), keyboard ( page 2 - 15 ) and keyboard shielding ( page 2 - 16 ). 2. The Bluetooth module is visible at point .
Disassembly 2 - 18 Removing the Modem 2.Disassembly Removing the Modem 1. Turn of f the computer , and turn it over , remove the battery ( page 2 - 5 ), keyboard ( page 2 - 15 ) and keyboard shielding ( page 2 - 16 ). 2. The modem is visible at point .
Disassembly Removing the TV Tuner Card 2 - 19 2.Disassembly Removing the TV Tuner Card 1. Turn of f the computer , and turn it over , remove the battery ( page 2 - 5 ), keyboard ( page 2 - 15 ) and keyboard shielding ( page 2 - 16 ). 2. The TV tuner card is visible at point .
Disassembly 2-2 0 2.Disassembly.
Part Lists A-1 A.Part Lists Appendix A:Part Lists This appendix breaks down the D900C/D901C series notebook’s construction into a series of illustrations. The compo- nent part numbers are indicated in the tables opposite the drawings. Note: This section indicates the manufacturer’s part numbers.
Part Lists A - 2 Part List Illustration Location A.Part Lists Part List Illustration Location The following table indicates where to find the appropriate part list illustration.
Part Lists TOP (D900C/D901C) A - 3 A.Part Lists TOP (D900C/D901C) Figure A - 1 TOP (D900C/ D901C) 無鉛 耐熱 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 寶石藍 無鉛 無鉛 寶石藍 無.
Part Lists A - 4 BOTTOM (D900C/D901C) A.Part Lists BOTTOM (D900C/D901C) Figure A - 2 BOTTOM (D900C/ D901C) 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 .
Part Lists LCD (D900C/D901C) A - 5 A.Part Lists LCD (D900C/D901C) Figure A - 3 LCD (D900C/ D901C) 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無.
Part Lists A - 6 MB - One VGA only (D900C/D901C) A.Part Lists MB - One VGA only (D900C/D901C) 無鉛 無鉛 無鉛 藍天2 互億 無 鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛.
Part Lists MB (D900C/D901C) A - 7 A.Part Lists MB (D900C/D901C) 無鉛 無鉛 無鉛 藍天2 互億 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 變更 無鉛 無鉛 無鉛 無鉛 無鉛 .
Part Lists A - 8 HDD (D900C/D901C) A.Part Lists HDD (D900C/D901C) 無鉛 無鉛 無鉛 Figure A - 6 HDD (D900C/ D901C).
Part Lists 2nd HDD (D900C/D901C) A - 9 A.Part Lists 2nd HDD (D900C/D901C) 無鉛 無鉛 Figure A - 7 2nd HDD (D900C/ D901C).
Part Lists A - 10 A.Part Lists COMBO (D900C/D901C) 無鉛 無鉛 無鉛 無鉛 無鉛 Figure A - 8 COMBO (D900C/ D901C).
Part Lists DVD-DUAL RW (D900C/D901C) A - 11 A.Part Lists DVD-DUAL RW (D900C/D901C) 無鉛 無鉛 無鉛 無鉛 無鉛 Figure A - 9 DVD-DUAL RW (D900C/D901C).
Part Lists A - 12 A.Part Lists.
Schematic Diagrams B-1 B.Schematic Diagrams Appendix B:Schematic Diagrams This appendix has circuit diagrams of the D900C/D901C notebook’s PCB’s. The following table indicates where to find the appropriate schematic diagram.
Schematic Diagrams B - 2 BLOCK DIAGRAM B.Schematic Diagrams BLOCK DIAGRAM Sheet 1 of 40 BLOCK DIAGRAM USB Port 2 CCD Cam er a BG A50 8 Blue To oth DDR2 SODIM M VGA DAUGHTER BOARD TP M P965 CA RD REA D.
Schematic Diagrams CLOCK GENERATOR B - 3 B.Schematic Diagrams CLOCK GENERATOR Sheet 2 of 40 CLOCK GENERATOR PC L KMI NI 1 CLK 48_CARD BU S RP9 4P2R_33_04 1 2 3 4 R1 51 1 0K _0 4 FSA C186 10P/50V_04(R).
Schematic Diagrams B - 4 CPU-1 B.Schematic Diagrams CPU-1 VCORE C1 23 33P _04 PLEASE COLSE TO Pin-H1 CP U_D #2 7 C 45 .1 U_ X7R _04 C488 10U /1 0V_0 8 C485 10U /1 0V_08 CP U_D #2 5 CPU_DE FER# 5 PECI CP U_D #2 3 CP U_D #5 3 C9 2 .
Schematic Diagrams CPU-2 B - 5 B.Schematic Diagrams CPU-2 Sheet 4 of 40 CPU-2 CP U_ S TPCL K# 10 R500 49 .9_1 %_04 R4 99 150_1%_0 4 R4 7 4 4. 7K_04 H_TDO CP U_ CO MP 7 THE RMD C TESTHI _2- 7 Near to F753 83M VT T_ PKGS ENSE C5 7 1 0U/1 0V _ 08 C1 2 5 .
Schematic Diagrams B - 6 Intel P965 CPU Interface 1/4 B.Schematic Diagrams Intel P965 CPU Interface 1/4 Sheet 5 of 40 Intel P965 CPU Interace 1/4 CPU_BPRI# 3 CPU_ D# 1 7 CP U_A #2 9 CPU_ D# 4 0 CPU_DRD Y# 3 CP U_A #1 4 CPU_BR0# CPU_ D# 2 3 CPU_DSTBP0# 3 CP U_A #2 1 CPU_ D# 4 6 HXSW ING S/ B 1/4* VTT +/-2% C5 3 8 2.
Schematic Diagrams Intel P965 PCI- E I/F 2/4 B - 7 B.Schematic Diagrams Intel P965 PCI- E I/F 2/4 Sheet 6 of 40 Intel P965 PCI-E I/F 2/4 5VS Z0679 C8 90 .1 U_X 7R_0 4 P E 0_R X#10 PE0 _ T XC # 0 + C5 42 470U F /2. 5V_D 2( R) 1 2 C8 87 .1 U_X 7R_0 4 C52 1 .
Schematic Diagrams B - 8 Intel P965 Memory I/F 3/4 B.Schematic Diagrams Intel P965 Memory I/F 3/4 Sheet 7 of 40 Intel P965 Memory I/F 3/4 MEM_ 0 A _ WE# ME M_0A _BA1 M E M_0_D A TA56 C37 .1 U_X 7R_ 04 C62 .1 U_X 7R_ 04 MEM_ 0 A _ CL K 1 # MEM_ 0 B _ A D D0 MEM _1 _ D QS# 5 M E M _1_D ATA51 C10 .
Schematic Diagrams DDRII SODIMM B - 9 B.Schematic Diagrams DDRII SODIMM ME M_ 1_ DA TA 2 MEM_0_D ATA10 MEM_0_D ATA36 MEM_0_D ATA60 C 4 10P /50V_04 ( R) ME M_0 B_ AD D 7 ME M_ 1_ DQ S # 0 ME M_ 1_ DA TA 22 MEM_0_D QS#7 C4 7 9 .1U_X7R_ 04 MEM_0B_AD D 12 MEM_0_D ATA49 MEM_0_D QM0 C4 75 .
Schematic Diagrams B - 10 Intel P965 Power 4/4 B.Schematic Diagrams Intel P965 Power 4/4 3VS 3VS 1.25V S L11 H CB 2012KF - 121T 30 Z0904 R 110 1_04 VCCA_HPLL C1 51 .
Schematic Diagrams ICH8 PCI, DMI, CPU, IRQ B - 11 B.Schematic Diagrams ICH8 PCI, DMI, CPU, IRQ Sheet 10 of 40 ICH8 PCI, DMI, CPU, IRQ INT#D 20 P E 1 _RX_NE W 28 AD 3 1 SP I_C S0# PE3 _ RX _ W A N DEVS.
Schematic Diagrams B - 12 ICH8 LPC, ATA, USB, GPIO B.Schematic Diagrams ICH8 LPC, ATA, USB, GPIO Sheet 11 of 40 ICH8 LPC, ATA, USB, GPIO USB P4 SW I# BATLOW # 3VS SRCC LK_SATA 2 USB P2 ACZ _SDIN 0 T 3VS OC #4 R567 33_04 R568 10K_04 T RP2 2 8P4R_8.2K_0 4 8 1 7 2 6 5 3 4 R350 22.
Schematic Diagrams ICH8 Power B - 13 B.Schematic Diagrams ICH8 Power Sheet 12 of 40 ICH8 Power C571 .0 1U_04 C618 10 U/10V_08 C3 23 .1 U_ X7R _04 C591 10 U/10V_08 PART 3/3 ICH 8 U9C IC H8R 8 2801HR N1.
Schematic Diagrams B - 14 MXM PCI-E CON1 B.Schematic Diagrams MXM PCI-E CON1 5V SMD_B A T1 23,2 9 PEX _ D1 _ RX# 1 3 DAC1_B 18 TXUP0 # 18 DDCB_ CL K VG AP WR G D 2.5V S VG A1T H R M # 23 SLI12 14 VGA2_FANSEN 23 DV I_ B_HPD 18 LVD S_UN2 LVD S_LN3 PEX_ D1_TX#[ 0.
Schematic Diagrams MXM PCI-E CON2 B - 15 B.Schematic Diagrams MXM PCI-E CON2 Sheet 14 of 40 MXM PCI-E CON2 SM C_T HE RM 4,2 3 PEX _ D0_ T X2 SM D_T HE RM 4,2 3 P EX_D 0_RX10 P EX_D 0_RX4 P EX_D 0_RX#4 C169 .1U/50V_ 06 D28 SCS551V A C C181 10U/25V_12 PE X_D0_TX#[0 .
Schematic Diagrams B - 16 BR03 PCI-E & Straps 1/3 B.Schematic Diagrams BR03 PCI-E & Straps 1/3 1.2VS 4.. 6, 9,1 2,16, 17, 30 Z1567 Z1 5 28 T C92 0 .
Schematic Diagrams BR03 PCI-E Interface 2/3 B - 17 B.Schematic Diagrams BR03 PCI-E Interface 2/3 Sheet 16 of 40 BR03 PCI-E Interface 2/3 PEX_D 1_R X#[0.. 15] Z1661 C752 .1 U_X 7R_ 04 P EX_D 1_RX#2 Z1637 Z1630 C408 .1 U_X 7R_ 04 C846 .1U _04 C746 .1 U_X 7R_ 04 P EX _D0_T X#15 Z16 01 P EX _D1_T X1 C256 .
Schematic Diagrams B - 18 BR03 Power & GND 3/3 B.Schematic Diagrams BR03 Power & GND 3/3 C85 5 .1 U_0 4 C943 .1U F/10V_04 C862 .1U _04 C852 .1U_04 C9 5 4 10U/10V _08 C86 4 .1U _04 BR03VDD 1.2VS C85 0 .1U _ 04 Z1701 C960 10U/10V _08 + C9 8 9 100U /6.
Schematic Diagrams DVI/ CRT B - 19 B.Schematic Diagrams DVI/ CRT Sheet 18 of 40 DVI/ CRT TX P 1 R84 8 20K_04( R ) FRED C462 10P/ 50V_04 C 140 10 P/50V_04( R ) DAC_G REEN 6 FGRN DV I_ B_ HPD L65 FC M 1608K- 121T 06_06 D44 BAV99( R) A C AC CRT PO RT R460 100K_0 4 R1 9 4.
Schematic Diagrams B - 20 Panel CON/ LED Indicator B.Schematic Diagrams Panel CON/ LED Indicator Sheet 19 of 40 Panel Con/ LED Indicator VDD3 LV DS _UN1 13 SWBK ON BT_EN 23,2 7 LE D _B AT_ FU LL 23 LV.
Schematic Diagrams 1394/ Card Reader (TI PCI7402) B - 21 B.Schematic Diagrams 1394/ Card Reader (TI PCI7402) Sheet 20 of 40 1394/ Card Reader (TI PCI7402) C77 1 10U/10V_08 T T CA RD _ PW REN# 26 S ERI RQ T T T C83 2 .
Schematic Diagrams B - 22 GLAN RTL8111B B.Schematic Diagrams GLAN RTL8111B Sheet 21 of 40 GLAN RTL8111B 3V 4 ,6,10 ..13,2 5.. 2 8,30 . .33 CT RL18 R6 82 0_0 4 C43 9 .
Schematic Diagrams Audio ALC888/ Amplifier B - 23 B.Schematic Diagrams Audio ALC888/ Amplifier Sheet 22 of 40 Audio ALC888/ Amplifier MIC1- VREF_L R6 0 1 3K_0 4 APG N D L72 HCB 2 01 2K F-1 21T3 0 Q54 .
Schematic Diagrams B - 24 KBC-H8/2111 B.Schematic Diagrams KBC-H8/2111 Sheet 23 of 40 KBC-H8/2111 VD D3 SUSB# 11,13 ,28,33 S ERIRQ KBD_DATA R 658 10 K_04 R632 100K _04 R6 49 10K_ 04 PWR/SUS_LE D 19 WE.
Schematic Diagrams JM368 PCIE to PATA B - 25 B.Schematic Diagrams JM368 PCIE to PATA PHD 10 PH_I OR DY Sign al:Sp ac e = 1:1 IDE _R ST # H_PDIAG# HD9 PE4 _ RX _ J MB3 6 8 # HD1 SMBDATA Sign al:Sp ac e = 1:1 H_CS #0 H_DIOR# X2 25MHz( R) C293 .1U/16V_04 PH D11 PHD 0 C56 6 .
Schematic Diagrams B - 26 Mini Card & TV Out/ Video In B.Schematic Diagrams Mini Card & TV Out/ Video In Sheet 25 of 40 Mini Card & TV Out/ Video In LPC_FRAME# 11,23 TPM _P D # 1.
Schematic Diagrams Daughter Connection B - 27 B.Schematic Diagrams Daughter Connection GND GND LED_C AP VDD3 GND 5V AM P _M U TE _ M 16 GN D LE D_N U M 23 LIN E-R 22 WE B0# 23 H10 H10 _0 D4_ 7 GND H3 .
Schematic Diagrams B - 28 CCD/ BT/ FAN/ ROM B.Schematic Diagrams CCD/ BT/ FAN/ ROM Sheet 27 of 40 CCD/ BT/ FAN/ ROM BT_EN 19, 23 C643 .1 U_X 7 R_ 04 48 mil Shut down_s tb_p ower 33 R43 6 100K_ 04( R ) C 419 .1U /1 6V_04 R 513 4. 99K_1% _04 3VS R 433 10K_04 5V 12, 13,2 3,26 ,30.
Schematic Diagrams Mini PCI/ MDC/ New Card B - 29 B.Schematic Diagrams Mini PCI/ MDC/ New Card 5VS CIR _RX R355 0_04 AD13 C338 4.7U/ 10V_08 3VS NC_1.5V ACZ _SDI N1 11 PE_WA KE# 11,13,21,25 R5 83 0_04( R ) STOP# R391 100K_ 04(R) C431 .
Schematic Diagrams B - 30 AC-In, Charger B.Schematic Diagrams AC-In, Charger PC194 *22P_50V_04 D05 PC32 . 1U_50V_06 PC156 10U_25V_12 PC25 .1U_50V_06 VA PR 18 10m_25 PR55 39K_1%_04 A C 5V_IN PD 24 FM5822 A C PQ58 2N7002W G D S CTL PR62 10K_04 PC33 1u_25V_08 AC5V _IN SYS5V VIN 13,19,26, 30.
Schematic Diagrams Power 1.2V/ 1.25V B - 31 B.Schematic Diagrams Power 1.2V/ 1.25V + PC109 15u/2 5V_V 1. 2VS SGND 5 1.25VS 6,9,12 PR 98 10K_ 1%_04 VIN PQ38 IR F 7821T R PB F 4 6 2 5 7 3 1 8 3A PR 161 10K_ 1%_04 SGND5 SGN D 3 PD 27 FM0540-N A C PC173 *.
Schematic Diagrams B - 32 Power 1.5V/ 1.05V/ 2.5V B.Schematic Diagrams Power 1.5V/ 1.05V/ 2.5V VI N PC1 28 *10U _25V_12 PC189 .1U_50V_06 PD17 FM582 2 A C PC119 1U_10V_06 PC131 1U_10V_06 9/25 PC126 .
Schematic Diagrams Power 1.8V/ 0.9V/ 12V B - 33 B.Schematic Diagrams Power 1.8V/ 0.9V/ 12V 1.8V PD25 SC S140 P A C PC 45 100 P_50V _04 PQ11 2N 70 02W G D S 0.5A PC161 *. 1U_10V_04 PC162 1000 P_50 V_06 3V 1.8V 7..9,3 3 SUSBL PC171 10U_25 V_12 VSSA PR145 100K_0 4 PR66 0_06 10A PC46 10U_25 V_12 VIN 1 VI N PR155 100K _04 PL1 2 2.
Schematic Diagrams B - 34 Power 3.3V/ 5V B.Schematic Diagrams Power 3.3V/ 5V PC 168 .1U_50 V_06 VDD5 19, 23, 26 ,30 ,3 1 PC65 *180P_5 0V_04 PC 79 .1U_50V_ 04 PD8 FM0540-N A C VDD3 PC71 220P_ 50V_04 1.8VS 1.8V 7 ..9,32 PR 87 20K_ 1%_0 4 SYS1 5V PR 80 1M _04 PR 81 10 _04 4A D05 SGN D 4 RUN/S S2 PC 73 1U _16 V_06 PR 90 15K _1% _04 PC58 .
Schematic Diagrams VCore Power B - 35 B.Schematic Diagrams VCore Power t RTH2 68K_ 06 1 2 EN PC 16 .1U_10 V_04 PR 26 0_04 CS 3 5V PC136 .1 U_ 50V_ 06 CP U_ COR E_ FB- 4 + PC5 15u/ 25V _V 5V PR 30 680_0 4 SGND6 PR 17 2K_1% _04 PC8 .0 047U_ 50V_04 + PC 148 47 0U_2 .
Schematic Diagrams B - 36 B.Schematic Diagrams Audio Board SPDI F-OU T_ A 4 SPDI F OUT LI N E-L _A MI C 1_L _A 3 AM P_M UTE_A AMP_MU TE_A LINE_SENSE_A VD D5_ A 1 D02 AC6 680P GND _A A_AGND GND _A AH 2 C48D48N BR3 100_0 8 C.IR AU1 O G V PI N K 5 LIN E-L_A GND_A AR1 39.
Schematic Diagrams Card Reader Board B - 37 B.Schematic Diagrams Card Reader Board CARD_P WREN# _B GN D _B M S/SD _D 2_B MS / SD _ D 0 _ B M S/SD _D 1_B BC2 10U/ 10V_08 GN D _B SD _C D#_B BC1 .
Schematic Diagrams B - 38 Click Board B.Schematic Diagrams Click Board VC 1 120P VCC 5_C GND_C TPA DCLK _C VC 2 120P SW _L GND_C CH3 C48D 48N SW_ R VR 4 0_04( R ) GND_C VCC 5_C 10MIL 10MIL CH2 H6_0D 2_3 VCN 1 85202- 0405 1 2 3 4 1 2 3 4 TPA DDATA _C VCC5_C SW _L GND _C VSW E B 2 HC H S TS -05-A 1 3 2 4 CH4 H6_ 0D2_3 VR1 10K_04 VC4 .
Schematic Diagrams HotKey Board B - 39 B.Schematic Diagrams HotKey Board SPI _T OOL1 SXUAZ - 10S2- B 1 2 3 4 5 6 7 8 9 10 GND_D HO T KEY 1#_D HO T KEY 2#_D GND_D DH2 H6_0D 2_3 DWEB1 HC H STS-05-A 1 3 .
Schematic Diagrams B - 40 Switch Board B.Schematic Diagrams Switch Board +3 V_ E CR _LED_1# GND_E NUMLOCK_1 T V_DVD_ON_1 +3VS _ E D04 WE B 2# _ 1 LID_SW #_1 GND_E T V_DVD_ON_1 ED6 1SS355 CA ER8 220_08.
Schematic Diagrams USB Board B - 41 B.Schematic Diagrams USB Board GND _F US BP 2 _ F FC8 10U/ 10V_08 FL2 H C B2012KF- 121 T30 USBN 0_F ??U S B _ P o r t ????1 0 0 U ??, ??? ??D e v i c e ?? ? Restart ? ? FH5 C59D59N USB V CC2 U S B V C C ?????5 V ~5 .
Schematic Diagrams B - 42 B.Schematic Diagrams.
An important point after buying a device Clevo D901C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clevo D901C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clevo D901C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clevo D901C you will learn all the available features of the product, as well as information on its operation. The information that you get Clevo D901C will certainly help you make a decision on the purchase.
If you already are a holder of Clevo D901C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clevo D901C.
However, one of the most important roles played by the user manual is to help in solving problems with Clevo D901C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clevo D901C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
