Instruction/ maintenance manual of the product IA-MKDL-150-CC Cleveland
Go to page of 37
Cle v eland Range Inc. 1333 East 179th St., Cle veland, Ohio , U.S .A. 44110 Ph : 1-216-481-4900 Fx : 1-216-481-3782 Visit our W eb Site at www .clevelandrange.
SECT . XIV PA GE 12 0600 Litho in USA Cleveland Range reserves right of design improvement or modification, as warranted. DIMENSIONS MODEL A B C D E F ELECTRICAL PER KETTLE - R.
.
.
.
.
.
CLEVELAND RANGE, LLC. Cleveland Range, LLC. 1333 East 179 th Street Cleveland, OH 44110 Phone: (216) 481-4900 Fax: (216) 481-3782 http://www.clevelandrange.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
_______________________________________________________________________ _ INCLINED AGITATOR KETTLE OPERATING AND CLEANING INSTRUCTIONS OPERATING INSTRUCTIONS Your kettle has been equipped with a control panel that has some or all of the following functions: 12.
_______________________________________________________________________ _ Ready to pump food out of kettle (Metering Filling Station, MFS, should be connected to the kettle during the sanitation process) 6. Foods must be cooked to a minimum of 165 ° F to kill dangerous pathogens and must be at least this temperature when it casings are filled.
_______________________________________________________________________ _ 7. Rinse out food debris from the kettle and flush through the metering filling station (MFS or food pump) if they are still connected. If the kettle is not connected to the food pump, open the valve and allow rinse water to flush into the floor drain.
_______________________________________________________________________ _ DAILY PRE-START UP 4. The operator must check the kettle, springs and scraper blades for proper installation before turning kettle on. 5. Make sure the connecting coupling from the drive shaft to the agitator is properly installed with the quick release pin fully engaged.
_______________________________________________________________________ _ PREVENTIVE MAINTENANCE COOK/CHILL MIXER & PASTA KETTLES A. AUTOMATIC DUMP VALVE Weekly - Check air collector regulator for.
_______________________________________________________________________ _ PREVENTIVE MAINTENANCE COOK/CHILL MIXER & PASTA KETTLES (continued) E. SAFETY VALVE Weekly - Check for leakage - Steam pressure 65 psi.
________________________________________________________________________ IA-MKDL-60-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90psi.
________________________________________________________________________ I A -MKDL-100-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to .
________________________________________________________________________ I A -MKDL-150-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to .
________________________________________________________________________ I A -MKDL-200-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to .
________________________________________________________________________ I A -MKDL-300-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to .
An important point after buying a device Cleveland IA-MKDL-150-CC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cleveland IA-MKDL-150-CC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cleveland IA-MKDL-150-CC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cleveland IA-MKDL-150-CC you will learn all the available features of the product, as well as information on its operation. The information that you get Cleveland IA-MKDL-150-CC will certainly help you make a decision on the purchase.
If you already are a holder of Cleveland IA-MKDL-150-CC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cleveland IA-MKDL-150-CC.
However, one of the most important roles played by the user manual is to help in solving problems with Cleveland IA-MKDL-150-CC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cleveland IA-MKDL-150-CC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
