Instruction/ maintenance manual of the product Champion Clearaudio
Go to page of 10
Page 1 clearaudio electronic GmbH 2006 C C h h a a m m p p i i o o n n L L E E V V E E L L 1 1 Assembly and User Manual.
Champion Level 1 USER MANUAL Page 2 clearaudio electronic GmbH 2006 DEAR AUDIO ENTHUSIAST Thank you for your decision to purchase a clearaudio Champion Level 1 turntable. This turntable is manufactured to the highest degree of tolerance and quality.
Champion Level 1 USER MANUAL Page 3 clearaudio electronic GmbH 2006 1. Front view The photo below shows the clearaudio Champion Level 1 turntable assembled and set up with the Unify tonearm. You can see the use of carefully selected materials and the resonance avoiding construction.
Champion Level 1 USER MANUAL Page 4 clearaudio electronic GmbH 2006 1 2 4 3 6 5 9 7 8 10 11 12 13 1 4 15 16 1 7 Overview of package contents Not shown: a pair of white gloves 1. Champion ac rylic chassis with mounted bearing 10. Champion acrylic cha ssis (lower part) 2.
Champion Level 1 USER MANUAL Page 5 clearaudio electronic GmbH 2006 3. Assembly and Operation First please put on the white gloves to avoid finger prints on the surface of the acrylic chassis during installation. 1. Place first the lower part-chassis on a clean and soft surface.
Champion Level 1 USER MANUAL Page 6 clearaudio electronic GmbH 2006 4. Place the decuppeling base for the motor in the indent of the chassis and place the motor on it. The switch of the motor should be on the outside of the turntable and the space between motor and chassis approx.
Champion Level 1 USER MANUAL Page 7 clearaudio electronic GmbH 2006 7. Turn the tonearm into the final position where the tonearm is almost parallel to the right hand edge of the chassis.
Champion Level 1 USER MANUAL Page 8 clearaudio electronic GmbH 2006 12. If you should have problems with hum, the turntable may need to be grounded. In this case, connect the grounding wire supplied to the screw of the bearing and to the earth connector of your amplifier.
Champion Level 1 USER MANUAL Page 9 clearaudio electronic GmbH 2006 6. Service If the platter (without drive belt) does not turn as easy as usual, you should squeeze a 5mm long line of the bearing grease into the upper part of the platter bearing.
Champion Level 1 USER MANUAL Page 10 clearaudio electronic GmbH 2006 7. Technical Data Construction : Geometrically resonance-optimized chassis, beltdrive Speeds: 33 1/3 rpm / 45 rpm Drive unit: S.
An important point after buying a device Clearaudio Champion (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clearaudio Champion yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clearaudio Champion - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clearaudio Champion you will learn all the available features of the product, as well as information on its operation. The information that you get Clearaudio Champion will certainly help you make a decision on the purchase.
If you already are a holder of Clearaudio Champion, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clearaudio Champion.
However, one of the most important roles played by the user manual is to help in solving problems with Clearaudio Champion. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clearaudio Champion along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
