Instruction/ maintenance manual of the product SPS-28 Clarke
Go to page of 28
Form No. 70466A 11/02 Clarke ® Printed in the U.S.A. READ THIS BOOK This book has important information for the use and safe operation of this machine.
Page 2 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Table of Contents Operator Safety Instructions ................................................................................... 3 Operator Safety Instructions Battery Powered Machine .
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 3 OPERATOR SAFETY INSTRUCTIONS DANGER means: Severe bodily injury or death can occur to you or other personnel if the DAN- GER statements found on your machine or in your Owner's Manual are ignored or are not adhered to.
Page 4 Clarke ® Model SPS-28 Space Sweeper Operator's Manual CAUTION: Connect or disconnect the battery plug only when the charger supply cord is disconnected or arcing and burning may result. CAUTION: D o not expose to rain. Replace defective cords immediately.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 5 INTRODUCTION The Model SPS-28 will effectively and efficiently sweep your floors at minimum cost, provided you operate this machine with reasonable care and maintain it in accordance with the intructions contained in this operator's manual.
Page 6 Clarke ® Model SPS-28 Space Sweeper Operator's Manual How to Prepare The Machine for Operation Model 28G (Gasoline Powered) NOTE: Do not attempt to operate the CLARKE Model SPS-28 before reading the instructions in this manual. WARNING: T o prevent injury , always wear protec- tive clothing.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 7 How to Prepare The Machine for Operation 1. Before starting the SPS-28B lift the battery box cover and make sure the battery cables are connected. 2. Place all controls in "NEUTRAL".
Page 8 Clarke ® Model SPS-28 Space Sweeper Operator's Manual HOW TO OPERATE THE MACHINE NOTE: Do not attempt to operate the CLARKE Model SPS-28 before reading the instructions in this manual. WARNING: To prevent injury , always wear protec- tive clothing.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 9 HOW TO OPERATE THE MACHINE (cont) How to Operate the Side Broom (Optional): 1. Engage the side broom in "SWEEP" position by grasping the head assembly, pulling forward and rotating downward until the pin in the arm assembly is against the stop on the locating collar.
Page 10 Clarke ® Model SPS-28 Space Sweeper Operator's Manual HOW TO OPERATE THE MACHINE (cont) How to Empty Debris Hopper: WARNING: T o prevent injury , always stop the en- gine or motor before you empty the hoppers or clean the filter. 1. Grasp the hopper by the handle provided and lift out until clear of frame.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 11 SPS-28 Space Sweeper (INCL UDES 28G & 28B) Section II Part s and Service Manual (70466A) Division of.
Page 12 Clarke ® Model SPS-28 Space Sweeper Operator's Manual SERVICE AND MAINTENANCE WARNING: Maintenance and repairs must be done by authorized personnel only. Keep Adjustments according to specifications. WARNING: T o prevent injury always stop the en- gine or motor before doing any mainte- nance or repairs to this machine.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 13 Drive Belts WARNING: T o prevent injury always stop the engine or motor before doing any maintenance or repairs to this ma- chine. The drive belts are automatically tensioned by a spring- loaded idler wheel.
Page 14 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Installation of New Main Brush (cont) Remove the three screws and washers and the bristle strip retained by them.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 15 Cap acitor T est If a commercial capacitor checker is not available, the following test may be made: 1. Briefly short the capacitor terminals together with a screwdriver . 2. Disconnect a wire from either capacitor terminal.
Page 16 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Clarke ® Model SPS-28 Main Frame, Brush Assembly and Drive System Drawing 1/99 87 86 95 28 42 77 75 76 74 4 5 6 24 25 26 71 96 70 3.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 17 Clarke ® Model SPS-28 Main Frame, Brush Assembly and Drive System Parts Lists 1/99 Ref # Part No.
Page 18 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Clarke ® Model SPS-28 Engine, Dust Control & Handle Assembly Drawing 11/02 34 11 31 41 42 26 11 27 39 37 38 37 36 35 34 33 32 3.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 19 Clarke ® Model SPS-28 Engine, Dust Control & Handle Assembly 11/02 Ref # Part No.
Page 20 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Clarke ® Model SPS-28 Hopper and Optional Sidebroom Assembly Drawing 11/02 49 34 BOTTOM TO P 27 28 51 52 50 53 54 55 52 OPTIONAL SI.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 21 Clarke ® Model SPS-28 Hopper and Optional Sidebroom Assembly Parts List 11/02 Ref # Part No. Description Qty 1 30313A Hopper 1 2 798529 Suppor t, Hopper T op 1 3 930090 Rivet, 5 / 32 Dia.
Page 22 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Clarke ® Model SPS-28 Battery P owered Model Dra wing 1/99 7 5 14 14 13 11 12 16 11 12 16 18 17 46 26 45 44 55 37 36 24 3 49 43 12 .
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 23 Clarke ® Model SPS-28 Battery P owered Model Dra wing 1/99 Ref # Part No. Description Qty 1 60071A Co v e r Assembly , Batter y Access 1 2 962003 Screw , 6 / 32 x 3 / 8 Rd. Hd. 4 3 930093 R i v et, 1 / 8 x 1 / 4 - 5 / 16 Po p 4 4 871376 Battery , 95 Amp Hr .
Page 24 Clarke ® Model SPS-28 Space Sweeper Operator's Manual Clarke ® Model SPS-28 Wiring Diagram & Electrical Schematic 1/99.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 25 Clarke ® Model SPS-28 Wiring Diagram 1/99 Ref # Part No. Description Qty 1 871376 Batter y , 95 amp Hr .
Page 26 Clarke ® Model SPS-28 Space Sweeper Operator's Manual NOTE S.
Clarke ® Model SPS-28 Space Sweeper Operator's Manual Page 27 CLARKE PRODUCT SUPPORT BRANCHES PRODUCTION F ACILITIES AL T O Danmark A/S, Aalborg Blytaekkervej 2 DK-9000 Aalborg +45 72 18 21 00 A.
Clarke ® LIMITED U.S. W ARRANTY This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year from the date of purchase, when operated and maintained in accordance with Clarke's Maintenance and Operations instructions.
An important point after buying a device Clarke SPS-28 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarke SPS-28 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarke SPS-28 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarke SPS-28 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarke SPS-28 will certainly help you make a decision on the purchase.
If you already are a holder of Clarke SPS-28, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarke SPS-28.
However, one of the most important roles played by the user manual is to help in solving problems with Clarke SPS-28. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarke SPS-28 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
