Instruction/ maintenance manual of the product TA0.1 Clark Synthesis
Go to page of 28
Owner ’ s Manual T A0.1 Amplier with Wired Remote Company Overview W arranty Safety Instructions Product Introduction Unpacking Y our Amplier Product Overview Setting Up Y our Amplier Opera.
www .clarksynthesis.com T A0.1 Amplier 2 COMP ANY O VER VIEW Thank you for purchasing a Clark Synthesis T actile Sound Amplier! We are condent this product will be a welcome addition to your audio system.
T A0.1 Amplier 3 www .clarksynthesis.com WARRANTY United States W ar ranty and Retur n P olicy T A0.1 CLARK SYNTHESIS AMPLIFIER WARRANTY Clark Synthesis, Inc. warranties the T A0.1 Amplier to be free from defects and workmanship under normal use for a period of two (2) years from date of original purchase.
www .clarksynthesis.com T A0.1 Amplier 4 SAFETY INSTR UCTIONS READ THESE INSTRUCTIONS. 1. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. 2. HEED ALL WARNINGS. 3. FOLLO W ALL INSTRUCTIONS. 4. DO NO T USE THIS AMPLIFIER NEAR WA TER. 5. CLEAN ONL Y WITH A DR Y CLO TH.
T A0.1 Amplier 5 www .clarksynthesis.com PR ODUCT INTRODUCTION OVERVIEW OF THE AMPLIFIER The T A0.1 amplier is designed exclusively for use with Clark Synthesis transducers. This amplier incorporates the latest digital technology and provides features not available on many ampliers.
www .clarksynthesis.com T A0.1 Amplier 6 UNP A CKING Y OUR AMPLIFIER P ACKA GE CONTENTS Please remove the amplier and accessories from the carton.
T A0.1 Amplier 7 www .clarksynthesis.com PR ODUCT O VER VIEW AC Panel V entilation Remote Control Input/Output Panel V ents.
www .clarksynthesis.com T A0.1 Amplier 8 PR ODUCT O VER VIEW Gain (V olume) Control On/Auto/Off Switch Power Indicator Light Low Pass/Bypass Switch Crossover (X-Over) Control R emote Contr ol Over .
T A0.1 Amplier 9 www .clarksynthesis.com PR ODUCT O VER VIEW R emote Contr ol Over view GAIN (V OLUME) CONTR OL The Gain (V olume) Control on the face of the T A0.1 amplier controls the degree to which the input signal is amplied. The gain level, combined with the level of the input signal, determines the actual volume output.
www .clarksynthesis.com T A0.1 Amplier 10 PR ODUCT O VER VIEW Audio Input/Output Connectors T ransducer Connector High/Low Input Signal Switch Input/Output P anel Ov er view.
T A0.1 Amplier 11 www .clarksynthesis.com PR ODUCT O VER VIEW Input/Output P anel Ov er view A UDIO INPUT/OUTPUT CONNECT ORS The Audio Input/Output Connectors accept standard RCA plugs. These connectors are split into Left and Right channels, as indicated by L and R on the panel.
www .clarksynthesis.com T A0.1 Amplier 12 PR ODUCT O VER VIEW A C P anel Ov er view Remote Control Wire Connector AC Power Cord Connector (IEC-601) AC PO WER CORD CONNECT OR (IEC-601) The AC Power Cord Connector is an adaptable connector that allows users to connect IEC-601 compatible AC cords to the amplier .
T A0.1 Amplier 13 www .clarksynthesis.com The following instructions are a quick overview of the steps necessary to install your new amplier . For more detailed instructions, please refer to the sections in the manual that are referenced below .
www .clarksynthesis.com T A0.1 Amplier 14 SETTING UP Y OUR AMPLIFIER The T A0.1 can be custom mounted for use in a variety of applications. By utilizing the pre-drilled holes in the mounting plate .
T A0.1 Amplier 15 www .clarksynthesis.com SETTING UP Y OUR AMPLIFIER CAUTION: Before connecting any wires or input/output lines, insure all equipment is off and no signals are being sent from the input device.
www .clarksynthesis.com T A0.1 Amplier 16 SETTING UP Y OUR AMPLIFIER HOME THEA TER There are several different ways to hook up your system in terms of which source material (signal) is delivered to the amplier(s) and transducer(s).
T A0.1 Amplier 17 www .clarksynthesis.com Right Front (RF) and Left Front (LF) Hookup For this hookup, connect the RF and LF Pre-Amp Outputs to the T A0.1 amplier inputs. NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs.
www .clarksynthesis.com T A0.1 Amplier 18 SETTING UP Y OUR AMPLIFIER If you are able to locate the amplier within 3 feet of the transducer (3 ft. is the approximate length of the speaker wire attached to the transducer), connect the transducer wires directly to the amplier .
T A0.1 Amplier 19 www .clarksynthesis.com SETTING UP Y OUR AMPLIFIER The T A0.1 has powered loop-through. This feature enables the user to take the signal from an audio source and pass it to a series of T A0.1 ampliers in order to drive multiple transducers.
www .clarksynthesis.com T A0.1 Amplier 20 OPERA TING Y OUR AMPLIFIER For Home Theater installations, once you have properly set up your amplier , it is important to take time to balance the transducer and subwoofer sound.
T A0.1 Amplier 21 www .clarksynthesis.com OPERA TING Y OUR AMPLIFIER If you are using the LFE/SUB signal as your input for the transducer , insure the 4. Low Pass/Bypass Switch is set to “Low Pass” (see photo #4) and the Crossover Control on the T A0.
www .clarksynthesis.com T A0.1 Amplier 22 SPECIFICA TIONS General Power Supply ................................................................................................................100 – 240 V AC, 50/60 Hz, Auto • Standby Current (1 10 V AC / 220 V AC).
T A0.1 Amplier 23 www .clarksynthesis.com TR OUBLESHOO TING Symptom T roubleshooting Question Remedy No Power Is the power cord plugged into the wall? Plug the power cord into the wall. Is the power cord plugged into the back of the amplier? Plug the power cord into the back of the amplier .
www .clarksynthesis.com T A0.1 Amplier 24 GL OSSAR Y OF TERMS T erm Denition Audio Input/Output Connectors Audio connectors on the amplier that receive or transmit the main signal.
T A0.1 Amplier 25 www .clarksynthesis.com GL OSSAR Y OF TERMS T erm Denition On/Auto/Off Switch The switch next to the Crossover Control that allows the user to place the amplier into Auto On/Standby mode, On, or Off.
www .clarksynthesis.com T A0.1 Amplier 26 INDEX Symbols 5-Way binding post 5, 18 A AC Panel 12 AC Power Cord Connector 5, 12 Audio Input/Output Connectors 10, 11, 13, 16, 17, 19, 24 B Balancing 13 .
T A0.1 Amplier 27 www .clarksynthesis.com INDEX M Mixer 17 Mounting 14 Multiple Signal Hookup 17 O On/Auto/Off Switch 5, 9, 11, 13, 15, 20, 21, 23 P Package Contents 6 Power Indicator (LED) 8, 9 Po.
www .clarksynthesis.com www .clarksynthesis.com 06/2008 V er. 1 ©2008 Clark Synthesis, Inc. For additional questions/concerns/issues, contact Clark Synthesis or visit our web site. Phone: 1-800-898-1945 Fax: 303-797-7501 Web: www .clarksynthesis.com Email: info@clarksynthesis.
An important point after buying a device Clark Synthesis TA0.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clark Synthesis TA0.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clark Synthesis TA0.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clark Synthesis TA0.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Clark Synthesis TA0.1 will certainly help you make a decision on the purchase.
If you already are a holder of Clark Synthesis TA0.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clark Synthesis TA0.1.
However, one of the most important roles played by the user manual is to help in solving problems with Clark Synthesis TA0.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clark Synthesis TA0.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
