Instruction/ maintenance manual of the product WH 105 Clarion
Go to page of 12
O WNER’S M ANUAL I NS TALLATION G UIDE A UTOMOTIVE RF S TEREO H EADPHONE S YSTEM FinalManual.qxd 2/1/01 9:49 AM Page 1.
FinalManual.qxd 2/1/01 9:49 AM Page 2.
WARNING! THE CLARION WH105 RF HEADPHONES ARE DESIGNED FOR LISTENING TO VIDEO OR AUDIO SOURCES FOR REAR SE AT PASSENGERS ON LY. THIS PRODUCT IS NOT INTENDED FOR USE BY THE DRIVER WHILE THE VEHICLE IS I.
2 Introduction The Clarion WH105 is a full-featured, high-tech Wireless Automotive RF Stereo Headphone System specifically cre - ated for the mobile environment. The WH105 frees you from the tangle of headphone wires and lets you enjoy music or TV audio without the clutter of cables.
3 1. Battery Cover Remove the cover and place 2 Alkaline AAA batteries in the compartment 2. Power ON/OFF Switch Main power switch turns headphone power off to prevent accidental micro switch activation during storage. 3. Power LED Indicator When illuminated, the headphones are fully functional.
4 RF Wireless Automotive Transmitter 1.Power Input 2.RCA Plug (Left Channel) 3.RCA Plug (Right Channel) 4.Power ON/OFF Switch 5.Channel Select Switch (Channel 1, Channel 2) 6.Antenna Cord RF Transmitter Specifications General Specifications Power Requirement: 12 Vdc Power Consumption: 1 watt, Power On Frequency Response: 35-12KHz Distortion: 0.
5 Battery Installation 1. Open the battery compartment by sliding the cover towards the bottom of the Headphone. 2. Place two (2) alkaline AAA batteries into the battery compartment of the Headphone(s), making sure that the battery polarity is correct.
6 INS TALLATION Precautions Do not allow liquids or foreign objects to enter the WH105 RF Transmitter or Headphones. If any unit should become wet, turn off all power and let your authorzied Clarion Dealer clean or service the equipment. DO NOT ATTEMPT TO OPEN OR SERVICE THE RF TRANSMITTER OR HEADPHONES.
7 Mounting The Transmitter The transmitter box can be mounted virtually anywhere in the vehicle. For optimum useage, mount away from vehicle computers, vehicle wire harnesses or any other sources of noise. Mount the unit securely with the provided adhesive tape so that the unit doesn't move around when the vehicle is in motion.
8 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an automotive installation.
FinalManual.qxd 2/1/01 9:49 AM Page 9.
©2000 Clarion Sales Corporation Re v . 0 (09/00) 661 W . Redondo Beach Blvd. Gardena, CA 90247 1-800-G0-CLARION www.clarion-usa.com FinalManual.qxd 2/1/01 9:49 AM Page 10.
An important point after buying a device Clarion WH 105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion WH 105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion WH 105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion WH 105 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion WH 105 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion WH 105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion WH 105.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion WH 105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion WH 105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center