Instruction/ maintenance manual of the product OHM641 Clarion
Go to page of 12
6 .4” L C D Color Monitor OWNER’S MANUAL OHM641.
INTRODUCTION The Clarion OHM641 is a full-featured 6.4" LCD Color Monitor. It can be integrated into a mobile multimedia system. The OHM641 has the following features: • 6.
7. Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 30 – 113 degrees F.
WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. 1. Disconnect the negative (-) lead of the battery before making any power connections. 2. When creating passage holes for the power wires, use grommets to eliminate any sharp edges created during drilling.
4. Place the gasket around the housing and plug the cables into the monitor . Mount the housing to the mounting bracket with the 4 machine screws provided. 5. Y ou can now run the IR, power and video cables to their respective destinations. If you’re using the VDH9600 or DVD9600, you can make all of your connections there.
APPLICA TIONS W ith the VDH9600, TTX001 and the FM100S 1. Pick a location to mount the tuner . T ypically the tuner will be located close to the VCP or DVD player .A void areas with excessive heat or moisture and mount the tuner. 2. Mount the TV antenna (ZCB-303 or equivalent) and plug into the tuner .
• T urn the modulator and the radio on and tune to the modulated frequency . T urn the FM100S’s switch on. The audio can now be heard over the sound system. Y ou can control the video player and the TV tuner by pointing their respective remotes at the IR eye in the monitor .
Stand alone with the TTX001 and the WH100 1. Pick a location to mount the tuner . A void areas with excessive heat or moisture and mount the tuner. Plug the 16 pin to A/V output connector into the tuner . 2. Mount the TV antenna (ZCB-303 or equivalent) and plug into the tuner .
OPTIONAL REMOTE CONTROL BA TTER Y INST ALLA TION • Insert 2 AAA batteries into the compartment located on the back of the unit, observing the proper polarity. NOTES: • Each time you change the batteries, you must reprogram the channels. • W e suggest you use alkaline batteries; do not use rechargeable batteries.
CARE AND MAINTENANCE Cleaning the cabinet: • Use a soft, dry cloth to gently wipe off any dirt. • Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel. Cleaning the LCD panel: • Use a soft, dry cloth to gently wipe off any dust.
Problem: The power was turned off when driving on bumpy roads. Solution: • Severe vibration to the operation panel activated the DCP’s sensor. Press the POWER button again to turn the power ON.
661 W. Redondo Beach Blvd. Gardena, CA 90247 1-800-GO-CLARION www.clarion-usa.com OHM641-10 Rev .3 (03/00).
An important point after buying a device Clarion OHM641 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion OHM641 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion OHM641 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion OHM641 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion OHM641 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion OHM641, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion OHM641.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion OHM641. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion OHM641 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
