Instruction/ maintenance manual of the product CZ209 Clarion
Go to page of 23
CD/USB/MP3/WMA RECEIVER A UT ORADIO CD/USB/MP3/WMA RECEPT OR CD/USB/MP3/WMA CZ 2 0 9 Owner’ s manual Mode d’emploi Manual de instrucciones.
2 CZ209 CLARION PRODUCT REGISTRA TION INFORMA TION For USA and Canada only www .clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product.
English 3 CZ209 Thank you for purchasing this Clarion product. ∗ Please fully read this owner’s m anual before operating this equipment. ∗ Check the contents of the enclosed warranty card and store it in a safe place with this manual. Contents 1.
English 4 CZ209 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are design ed to provide reasonable protection against harmful interference in a residential installation.
English 5 CZ209 . Names of the Buttons an d Their Main Functions [RELEASE] button • Press to unlock DCP. [] b u t t o n • Perform preset scan while in the radio mode. • Play or pause a track while in CD/MP3/WMA/ USB/iPod mode. [BND] button • Change bands, or select seek tuning or manual tuning while in radio mode.
English 6 CZ209 Removing the DCP 1. Press and hold the [ SRC ] button (1 sec.) to switch off power. 2. Press the [ RELEASE ] button. ∗ DCP is unlocked . 3. Remove DCP. Attaching the DCP 1. Insert the right end of DCP into main unit. 2. Press left end of DCP into main unit.
English 7 CZ209 Functions of Remote Control Unit Buttons ∗ Some buttons o n the remote have differen t functions f rom those on the mai n unit. ● Shared modes [SRC] button • Press to turn on power. Press and hold (1 sec.) to turn off power. • Use to change operation mode.
English 8 CZ209 Inserting the Battery 1 Slide remote control unit’s rear cover in the direction shown. 2 Insert battery (CR2025) into insertion guides with printed side (+) up. 3 Press battery into compartment as shown. 4 Replace and slide cover un til it clicks into place.
English 9 CZ209 Sound Adjustment Sound effects and tone can be adjusted as desired. ● Setting the Z- Enhancer Plus This unit has 4 sound tone effects stored in memory. Select the effect you prefer. ∗ The factory de fault setting is “ OFF ”. 2-1.
English 10 CZ209 ● Adjusting the balance 2-1. Select “ BALA NCE ”. 3-1. Turn the [ ROTARY ] knob to adjust balance between right and left speakers. ∗ The factor y default setting i s “ CENTER ”. (Adjustmen t range: RIGHT12 to LEFT12 ) ● Adjusting the fader 2-1.
English 11 CZ209 Manual memory 1. Use seek tuning or manual tuning to select the desired station. 2. Press and hold one of the [ DIRECT ] buttons (2 sec.) to store the current station in preset memory. Auto store The auto store function stores up to 6 sta tions automatically tuned in sequential order.
English 12 CZ209 ● Number of files or folders 1. Up to 256 files can be recognized per folder. Up to 578 files can be played. 2. Tracks are played in the order they were recorded onto the disc. (Tracks may not always be played in the order displayed on the PC.
English 13 CZ209 Selecting a track ● Track advance 1. Press the [ v ] button to move to the beginning of the next track. 2. Each time the [ v ] button is pressed, the track advances to the beginning of the next track. ● Track back 1. Press the [ x ] button to return to the beginning of the current track.
English 14 CZ209 Operations Common to Each Mode ● Setting the clock 2-1. Select “ CLOCK ”. 3-1. Press the [ ] button 3-2. Press [ x ] or [ v ] to select the hour or minute. 3-3. Turn the [ ROTARY ] kn ob to set the time. ∗ The clock is displayed in 12 -hour format.
English 15 CZ209 ● Cell phone interrupt setting If you connect this unit and your cell phone with an optional cable, you can listen to your calls on your car speakers. When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT370) (sold separately): ∗ The factory de fault setting is “ OFF ”.
English 16 CZ209 • When a USB memory device is composed of two or more drives, only one of the drives will be detected. • USB memory devices with security functions are not supported.
English 17 CZ209 iPod Operations This section describes operations when connected to an Apple iPod via the USB cable. Notes: • See t he iPod Owner’s Manual for de tails regardin g operations. • The unit will not op erate, or may operate improperly with unsupported versions.
English 18 CZ209 Other various play function s (in Play mode) Notes: • These functions ar e not supported when in the iPod menu mode. • The Random function set on the iPod remains the same after co nnecting/dis connecting of the iPod. • The R epeat function o n the iPod will be changed when the iPod is connected/disco nnected to this unit.
English 19 CZ209 Selecting category using preset memory 1. Press the [ BND ] button to select the iPod menu mode. The category can be set as follows in the [ DIRECT ] (1-6) buttons. [1] : PLAYLIST [2] : ARTIST [3] : ALBUM [4] : SONG [5] : GENRE [6] : COMPOSER 2.
English 20 CZ209 8. TROUBLESHOOTING Problem Cause Measure General Power does not turn on. (No sound) Fuse is blown . Replace wi th a fuse of the same amperage. If the fuse blows again , consult your dealer . Incorrect wiring. Consult you r dealer. No sound when operating the unit with amplifier s or power antenna attached.
English 21 CZ209 If an error occurs, one of the following messages is displayed. Take the measures described bel ow to eliminate the problem. USB/iPod No sound T he device contains no MP 3/ WMA files. Record MP3/WMA files properly to the device. The files a re not proper MP3/ WMA format.
English 22 CZ209 If an error display other than the ones described abov e appears, press the reset button. If the problem persists, turn off the power and consult your de aler.
Clar ion Co., Ltd. All Rights Reser v ed. Copyright © 200 8 : Clarion Co., Ltd. P rinted in China / Imprimé en Chine / Impreso en China 200 8 /1 0 PE-31 57B 2 8 0- 8 6 8 7- 0 0.
An important point after buying a device Clarion CZ209 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion CZ209 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion CZ209 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion CZ209 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion CZ209 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion CZ209, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion CZ209.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion CZ209. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion CZ209 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
