Instruction/ maintenance manual of the product WS-G5487 Cisco Systems
Go to page of 20
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco Systems, Inc. All rights reserved. 78-5399-03 Rev.
2 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Overview Overview The GBIC is a hot-swappable input/output de vice that plugs into a Gigabit Ethernet port, linking the module port with the f iber-optic network.
3 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Overview When using an LX/LH GBIC with a 62.5-micron diameter MMF , you must install a mode-conditioning patch cord (CAB-GELX-625 or .
4 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Overview Specifications GBIC specif ications are listed in T able 3. GBIC transmitter po wer and receiv er sensitivity v alues are listed in T able 4. Port Cabling Specifications T able 5 provides cabling specif ications for the GBICs that you install in the Gigabit Ethernet port.
5 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Overview Note The mode-conditioning patch cord (CAB-GELX-625 or equi valent) is required to comply with IEEE standards. The IEEE found that link distances could not be met with certain types of f iber-optic cable cores.
6 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Safety Overview Safety Overview Safety warnings appear throughout this publication in procedures that, if performed incorrectly , may harm you. A warning symbol precedes each warning statement.
7 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Safety Overview Warning Before you install, operate, or service the system, read the Site Preparation and Safety Guide . This guide contains important safety information you should know before working with the system.
8 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Required Tools Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
9 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Installing the GBIC Figur e 2 Installing a GBIC (With Clips) Step 4 Slide the GBIC through the f lap covering the sock et opening until you hear a click indicating the GBIC is locked into the slot.
10 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Removing a GBIC Installing a GBIC with a Handle T o install a GBIC that has a handle, follow these steps: Step 1 Remov e the GBIC from its protectiv e packaging. Step 2 Check the label on the GBIC to verify that the GBIC is the correct model (SX, LX/LH, or ZX) for your network.
11 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Standards Compliance Specifications Removing a GBIC with Clips If you are removing a GBIC that has clips, follo w these steps: Step 1 Disconnect the network f iber-optic cable from the GBIC SC-type connector .
12 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Y ou can determine whether your equipment is causing interference by turning it of f. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral de vices.
13 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Qualified Personnel Warning Warnung Warnhinweis Bevor Sie das System installieren, in Betrieb setzen oder warten, lesen Sie die Anleitung zur Standortvorbereitung und Sicherheitshinweise .
14 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Class 1 Laser Product Warning Advarsel Bare opplært og kvalif isert personell skal foreta installasjoner , utskiftninger eller service på dette utstyret.
15 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Invisible Laser Radiation Warning Warning Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures.
16 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Product Disposal Warning Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
17 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Translated Safety Warnings Wrist Strap Warning Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.
18 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Related Documentation Related Documentation For more detailed installation and conf iguration information, refer to these publicatio.
19 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Obtaining Technical Assistance Documentation Feedback If you are reading Cisco product documentation on the W orld Wide W eb, you can submit technical comments electronically . Click Feedback in the toolbar and select Documentation .
20 Gigabit Interface Converter Installation Note 78-5399-03 Rev. A0 Obtaining Technical Assistance Contacting TAC by Using the Cisco TAC Website If you hav e a priority lev el 3 (P3) or priority lev el 4 (P4) problem, contact T AC by going to the T AC website: http://www .
An important point after buying a device Cisco Systems WS-G5487 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems WS-G5487 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems WS-G5487 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems WS-G5487 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems WS-G5487 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems WS-G5487, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems WS-G5487.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems WS-G5487. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems WS-G5487 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
