Instruction/ maintenance manual of the product SRW224G4 Cisco Systems
Go to page of 4
Secure , reliable , in telligent , SNMP managed switching for gro wing businesses 24-P or t 10/100 + 4-P or t Gigabit S witch with W ebView The Linksys W ebView Managed switch allows you to expand your network secur ely . Configuration of the switch is secur ed using SSL for W eb access and SSH for T elnet access.
24-P or t 10/100 + 4-P or t Gigabit S witch with W ebView F eatures • 24 - 10/100 Switched RJ-45 po rts deliver up t o 200Mbps of thr oughput per por t • 4 - 10/100/1000 Switched RJ-45 Gb Uplink P orts (with 2 shared mini-GBIC por ts) • Switching capacity delivers 12.
Specifications Ports 24 RJ-45 connectors for 10BASE-T and 100BASE-TX, 4 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 shared SFP slots, Auto MDI/MDI-X, Autonegotiate/Manual setting Cablin.
Lay er 2 VLAN P or t-based and 802.1q based VLANs, Priva te VLAN Edge (PVE), Management VLAN HOL Blocking Head of line blocking prevention Mini Jumbo Frame Supports frames up to 1600 bytes Dynamic VLAN GVRP* - dynamic VLAN Registration Standards Standards 802.
An important point after buying a device Cisco Systems SRW224G4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems SRW224G4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems SRW224G4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems SRW224G4 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems SRW224G4 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems SRW224G4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems SRW224G4.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems SRW224G4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems SRW224G4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
