Instruction/ maintenance manual of the product OL-12456-01 Cisco Systems
Go to page of 10
CH A P T E R 7-1 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 7 High Latency and Low Bandwidth Interconnection Cisco IPICS provi des support for en vironments that inclu de high latenc y and lo w or variab le bandwidth links, such as satellite lin ks.
7-2 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth Interconne ction Supported Deployment Solutions Supported Deployment Solutions Cisco IPICS enhancements inc.
7-3 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth In terconnection Supported Deployment Solutions • The RMS and the Cisco IPICS serv er automatic synchronization mech anism must be disabled in this scenario.
7-4 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth Interconne ction Requirements and Supp ort Information For det ailed examples that show ho w to configure the unicast port ion of the M1:U12: M2 connection trunk, see Chapter 6, “Cisco IPICS Deployment Models.
7-5 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth In terconnection Performing Addi tional Configur ations on the Cisco IPICS Server • Jitter b uf fer—Enables support for u p to 250 ms of maximum j itter on the netw ork (to support burst latency).
7-6 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth Interconne ction Performing Additional Configuratio ns on the Cisco IPICS Server Adjusting ARP Commands If .
7-7 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth In terconnection Performing Addi tional Configur ations on the Cisco IPICS Server Procedure Step 1 From the Cisco IPICS Administr ation Console, choose Conf iguration > RMS .
7-8 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth Interconne ction Performance Guidelines Ti p For more information about ho w to back up, restore, and modify the registry , acces s the Microsoft Support site at http:// support.
7-9 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth In terconnection Performance Guideline s • For high latency , low ban dwidth deployment s, allow 1.
7-10 SRND for Cisco IPICS Release 2.0(1) OL-12456-01 Chapter 7 High Latency and Low Bandwidth Interconne ction Performance Guidelines.
An important point after buying a device Cisco Systems OL-12456-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems OL-12456-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems OL-12456-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems OL-12456-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems OL-12456-01 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems OL-12456-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems OL-12456-01.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems OL-12456-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems OL-12456-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
