Instruction/ maintenance manual of the product S83200CMW0 AEG
Go to page of 28
S83200CMW0 EN FRIDGE FREE ZER USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 7 Control panel 11 First use 12 Daily use 16 Helpful hints and tips 18 Care and cleaning 19 What to do if… 21 Technical data 21 Installation 24 Environmental concerns T.
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
• It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short - circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appli- ance if it is damaged. Report possible damages immediately to the place you bought it.
CONTROL PANEL 1 7 6 5 2 3 4 1 Fridge temperature colder bu tton 2 Fridge temperature warmer bu tton 3 ON/OFF button OK button 4 Freezer temperature warmer button 5 Display 6 Freezer temperature colder.
8 FROSTMATIC function 9 COOLMATIC function 10 Child Lock function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the appliance ON/OFF button if the display is off. 3. The alarm buzzer could operate after few seconds.
Set default temperature: • +5°C for the fridge • - 18°C for the freezer The temperature indicators show the set temperature. To restore the set default temperature switch off the appliance.
1. Press the Mode button until the corresponding icon appears. The COOLMATIC indicator flashes. 2. Press the OK button to confirm. The COOLMATIC indicator is shown. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1.
The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROSTMATIC indicator flashes. 2. Press the OK button to confirm. 3. The FROSTMATIC indicator goes off.
DAILY USE Storage of frozen food When first starting - up or after a period out of use, before putting the products in the com- partment let the appliance run at least 2 hours on the higher settings.
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. Bottle rack Place the bottles (with the opening facing front) in the pre - positioned shelf. If the shelf is positioned horizontally, place only closed bottles.
Positioning the door shelves To permit storage of food packages of vari- ous sizes, the door shelves can be placed at different heights. To make these adjustments proceed as fol- lows: gradually pull the shelf in the direction of the arrows until i t comes free, then repos i- tion as required.
ProFresh Mode If the compartment is not needed as FreshBox, the settings can be changed in order to have it just as a low temperature drawer. To switch on the function: 1. Slide upward the flap as shown in the figure. To switch off the function: 1. Slide down the flap.
MAXIBOX drawer The drawer is suitable for storing fruit and vege- tables. There is a separator inside the drawer that can be placed in different positions to allow for the sub- division best suited to personal needs.
Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low tempera- ture and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator.
Hints for storage of frozen food To obtain the best performance from this appliance, you should: • make sure that the commercially frozen foodstuffs were adequately stored by the retai l- er; • be.
It is important to periodically clean the defr ost water drain hole in the middle of the refrigerator compartment channel to prevent the water over- flowing and dripping o nto the food inside. Use the special cleaner provided, which you wi ll find already inserted into the drain hole.
Problem Possible cause Solution The room temperature is too high. Decrease t he room temper ature. The FROSTMATIC function is switched on. Refer to "FROSTMATIC function" . The COOLMATIC function is switched on. Refer to "COOLMATIC func tion".
Problem Possible cause Solution "dEMo" appears on the display. The appliance is in demonstra- tion mode. Keep pressed approximately 10 sec the OK button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly.
Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
Rear spacers You can find the two spacers in the bag with doc- umentation. Do these steps to install the spacers: 1. Release the screw. 2. Engage the spacer below the screw. 3. Turn the spacer to the right position. 4. Tighten again the screws. Levelling When placing the appliance ensure that it stands level.
Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation. To remove them proceed as follows: 1. Move the shelf holders in the direction of the arrow (A). 2. Raise the shelf from the rear and push it for- ward until it is freed (B).
for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative conseq uences for the environment and human health, which could otherwise be caused by inappropri ate waste handling of this product.
26.
27.
www.aeg.com/shop 210621364 - A - 022011.
An important point after buying a device AEG S83200CMW0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG S83200CMW0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG S83200CMW0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG S83200CMW0 you will learn all the available features of the product, as well as information on its operation. The information that you get AEG S83200CMW0 will certainly help you make a decision on the purchase.
If you already are a holder of AEG S83200CMW0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG S83200CMW0.
However, one of the most important roles played by the user manual is to help in solving problems with AEG S83200CMW0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG S83200CMW0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
