Instruction/ maintenance manual of the product IGX 8 Cisco Systems
Go to page of 12
APPENDIX -1 System Specifications A This appendix contains system specifications. General This section provides general system information on the IGX 8. System Capacity: 1 shelf with 8 card slots. Requires 2 dedicated front slot(s) for NPMs. Requires 2 dedicated back slots for SCMs (1 slot with blank plate).
-2 IGX 8 Installation Manual, Release 8.2.0 V oice Cir cuit Suppor t Input A C Po wer Connector: IEC 16 Amp input connector . 6 dif ferent power cords are a v ailable to comply with the standards of individual countries. Po wer cords are 6 feet (about 2 meters) long.
-3 Data Channel Suppor t Sync. Data Interfaces: RS-232C/D, RS-449/422, V .24, X.21, and V .35 with IGX 8 as DCE or DTE. High-Speed Data Rates (HDM): 2.4 Kbps to 1.344 Mbps. Low-Speed Data Rates: 2.4 to 19.2 Kbps per LDM port. Ports per card: LDI: 4 or 8.
-4 IGX 8 Installation Manual, Release 8.2.0 Digital Data Service Interface Ports per card: Four . Electrical Interface: Digital Data System (DDS)—A T&T Pub. 62310, No vember 1987. Interface T ype: DSU or OCU (software selectable). Data Rates: 2.
-5 T1 Interface Line Rate: 1.544 Mbps, ± 50 bps ( ± 200 bps VCO lock range). Line Code: Bipolar AMI or B8ZS. Framing Formats: Fractional T1, adjacent or alternating channels. Minimum of four DS0 channels required. Signal Le vel: DSX-1 compatible. Line Impedance: T erminated = 100 Ohms nominal.
-6 IGX 8 Installation Manual, Release 8.2.0 E1 Interface Line Rate: 2.048 Mbps, ± 50 bps ( ± 200 bps VCO lock range) Line Code: Bipolar AMI or HDB3 Line Impedance: 120 Ohms (balanced) or 75 Ohms (balanced or unbalanced) Minimum Pulse Density: Zero code suppression via HDB3 coding Frame Format: Unframed, 32-channel (G.
-7 T3 Interface Line Rate: 44.736 Mbps ± 20 ppm, asynchronous. Line Code: B3ZS. Clock Source Mode: Internal (Asynchronous). Signal Le vel: DSX-3. Framing Formats: M13 mode, C-bit parity . Alarms Processed: AIS. LOS. Remote Alarm Indication. Loss Of Framing.
-8 IGX 8 Installation Manual, Release 8.2.0 E3 Interface Line Rate: 34.368 Mbps ± 20 ppm, asynchronous. Line Code: HDB3. Clock Source Mode: Internal (Asynchronous). Signal Le vel: ITU-T G.703 Framing Formats: ITU-T G.804, G.832, Alarms Processed: AIS.
-9 Frame Rela y Interface T ype of Service: Permanent V irtual Circuit (PVC). Data Interface: Per ITU-T I.122 and ANSI T1/S1 Standards. Data T ransfer Protocol: LAP-D frame level core functions. Input Data Format: High Le vel Data Link (HDLC) protocol.
-10 IGX 8 Installation Manual, Release 8.2.0 A TM Interface Netw ork Synchr onization T ype of Service: Permanent V irtual Circuit (PVC) Interface T ypes: User-to-Netw ork (UNI) and Network-to-Network (NNI) per ITU I.
-11 Netw ork Management Control Network Control T erminal: StrataV iew Plus workstation and StrataCom software required for graphical display of network status, statistics gathering and display , and automatic do wnloading of software.
-12 IGX 8 Installation Manual, Release 8.2.0.
An important point after buying a device Cisco Systems IGX 8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems IGX 8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems IGX 8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems IGX 8 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems IGX 8 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems IGX 8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems IGX 8.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems IGX 8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems IGX 8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
