Instruction/ maintenance manual of the product EHWIC1GESFPCU Cisco Systems
Go to page of 18
Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards First Published: March 15, 2011 This document describes how to configure the Ci sco Gigabit Ethernet enhanced hi gh-speed W AN interface card (EHWIC).
2 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Contents Contents • Prerequisites for the EHWIC 1 GE-SFP-CU • Restrictions for the EHWIC 1 GE-SFP-CU • Overv.
3 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Overview of the EHWIC 1 GE-SFP-CU Overview of the EHWIC 1 GE-SFP-CU The Cisco Gigabit Ethernet W AN EHWIC (EHWIC 1 .
4 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuring the EHWIC 1 GE-SFP-CU LEDs Ta b l e 1 lists the LEDs and descri bes their functionali ty a nd dif ferent states. The LEDs provide a vis ual indication of y our av ailable services.
5 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuring Loopback DETAILED STEPS Configuring Loopback Use the loopback command in in terface conf iguration mode to conf igure loopback. The EHWIC 1 GE-SFP-CU supports MA C layer loopback a nd dri ver type loopback.
6 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU Configuration Examples for EHWIC 1 GE-SFP-CU This section pro vides t.
7 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU ! ! ! redundancy ! ! ! ! ! ! ! interface GigabitEthernet0/0 no ip addr.
8 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU ip forward-protocol nd ! no ip http server no ip http secure-server !.
9 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU PID: PVDM2-64 , VID: V01 , SN: FOC1052368L NAME: "SM-ES3-24-P: Et.
10 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU date_code 08090349 (yymmddvv, v=vendor specific) cc_ext 0xC5 Digital.
11 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU Fragment Frames Received : 0 In-Range Length Errors : 0 Alignment Err.
12 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU Management Interrupt Enable (0x6000): Hwic Int Frame Mgmt Int 0x06 I.
13 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuring SFPs Hardware is EHWIC-1GE-SFP-CU, address is 000f.f7a2.
14 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Configuring Third-Party SFPs • 1000 Mbps speed for 1000B ASE SFPs • Only the follo wing routers and mo dules .
15 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Additional References Examples This example sho ws how to conf igure a third- party SFP on a Cisco IS R G2 Series .
16 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Additional References Standards MIBs RFCs Technical Assistance Cisco and the Cisco logo are tradem arks or registered tr ademarks of Cisco and/or its af filiates in the U.
17 Configuring Gigabit Ethernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Additional References ©2011- 2013 Ci sco Systems, In c. All right s reserv ed.
18 Configuring Gigabit Eth ernet Enhanc ed High-Speed WAN Interface Ca rds OL-24318-02 Additional References.
An important point after buying a device Cisco Systems EHWIC1GESFPCU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems EHWIC1GESFPCU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems EHWIC1GESFPCU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems EHWIC1GESFPCU you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems EHWIC1GESFPCU will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems EHWIC1GESFPCU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems EHWIC1GESFPCU.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems EHWIC1GESFPCU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems EHWIC1GESFPCU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
