Instruction/ maintenance manual of the product PE 8036M AEG
Go to page of 23
2 /88 A B.
3 /88 C D E/1 E/2 F/1 F/2.
4 /88 G H I/1 I/2 I/3 L.
5 /88 M/1 M/2 N/1 N/2 O/1 O/2.
6 /88 P/1 P/2 Q /1 Q/2 Q/3 Q/4.
7 /88 Q/5 Q/6 Q/7 Q/8 R/1 R/2.
8 /88 R/3 R/4 R/5 R/6 R/7 R/8.
9 /88 S/1 S/2 S/3.
1 /23 INDEX 12. Description of the Coffee machine 13. Description of the control panel 14. Recommendations 15. Instructions for the first use 16. Accessories (already included) 17. Coffee drawer (optional) 18. Coffee 19. Hot water 20. Steam 21. Recipes 22.
2 /23 OPERATING • This appliance must be used only by adults. Make sure that the appliance will be out of the reach of children. • All attempts to modify the techni cal features of this appliance are very dangerous. • Keep the appliance always well cleaned.
3 /23 DISUSED APPLIANCES • Disused or useless appliances have not to be considered as discarded goods. Thanks to the ecological removal, a lot of materials used for producing your appliance can be used again.
4 /23 - If the machine will not be used for long periods, change the water in the reservoir a nd make the boiler empty by making the machine deliver about half a litre of water (see chapter 8.Hot water). FILL UP THE COFFEE BEANS CONTAINER • Push the cabinet block button (E/1).
5 /23 REGULATION OF THE GROUND COFFEE • The coffee machine comes out of the factory already set on an ideal coffee grinding level. • Push the cabinet block button (E/1). • Take the coffee machine out of the cabinet using the special telescopic runners (E/2).
6 /23 PROGRAMMING OF COFFEE MEASURE IN THE CUP • The coffee measure in the cup can be as one likes. • Set the coffee measuring knob (B - 19) on the required “coffee measure” light and grind a certain me asure of coffee in the filter - holder.
7 /23 7. COFFEE USE OF COFFEE • Put the coffee knob (B - 19) on the required coffee measure. • I nsert the filter - holder (A - 11) under the Coffee measuring device (A - 5). By pressing the relative button (A - 4), the previously programmed coffee measure for one or two cups will automatically come out.
8 /23 will be exactly the one selected and previously programmed. • Take the fi lter - holder out of the ring nut and remove the pod. HOW TO PREPARE AN EXCELLENT ESPRESSO • To obtain an excellent espresso cleaning and right temperature are the most important elements.
9 /23 temperature indicator will be ON (B - 26). • Wait until both of them will be out (I/2). Push the steam button again in order to stop producing steam (B - 23). • To check if the steam has been produced push again the steam button (I/3); if the water temperature indicator l(B - 26) remains out it means that steam is r eady to come out.
10 /23 10. RECIPES ITALIAN CAPPUCCINO This is a normal espresso coffee with steam - heated milk that gives the coffee a milder flavour and a rich, frothy topping. Serve in a large cup. Pour cold milk into a tall jug and heat it using the steam spout if your machine has one.
11 /23 11. CLEANING AND SERVICING OUTER PARTS • The outer parts of the machine should be cleaned with sponges or soft cloths to avoid scratching. (L). • Under no circumstances use solvents, abrasive powders or steel wool. DRIP TRAY • Remove the drip tray from the machine (M/1,M/2).
12 /23 pods, so that from the filter holder should come out only water until the reservoir will be completely empt y. - Fill in again the reservoir with cool water and make again the above mentioned process (without using coffee as before) in order to rinse the boiler.
13 /23 USE OF TH E SIDE PLATES The width of the seat in which the coffee machine should be inserted is determined by the thickness of the cabinet’s sides. To compensate the different possible measurement, the appliance is equipped with 6 plates, 4 are 2mm in thickness a nd 2 are 1mm.
14 /23 • Make runners run until the safety lock should click. • With the machine completely inserted in the seat use the cabinet block button (A - 6) and check if it functions correctly.
15 /23 1000 W • Electric pump input 50 W • Working pressure 12 bar • Fuse 10 A. 12. 15. TECHNICAL ASSISTANCE AND SPARE - PARTS.
An important point after buying a device AEG PE 8036M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG PE 8036M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG PE 8036M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG PE 8036M you will learn all the available features of the product, as well as information on its operation. The information that you get AEG PE 8036M will certainly help you make a decision on the purchase.
If you already are a holder of AEG PE 8036M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG PE 8036M.
However, one of the most important roles played by the user manual is to help in solving problems with AEG PE 8036M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG PE 8036M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
