Instruction/ maintenance manual of the product PF207 Chromalox
Go to page of 2
© 2010 Chromalox ® , Inc. Specifications — Table A * Note: 208V amperage is 86% of 240V value. † These models can be field changed from single phase to three phase or three phase to single phase.
INST ALLA TION 1. The amperage rating of the disconnect must be equal to or greater than the amperage rating on Table A and as marked on the nameplate located on the bottom access door (Figure 1). A. The HDS-1 is rated 50 Amps at 480V or less and 40 Amps at 500-600V.
An important point after buying a device Chromalox PF207 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chromalox PF207 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chromalox PF207 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chromalox PF207 you will learn all the available features of the product, as well as information on its operation. The information that you get Chromalox PF207 will certainly help you make a decision on the purchase.
If you already are a holder of Chromalox PF207, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chromalox PF207.
However, one of the most important roles played by the user manual is to help in solving problems with Chromalox PF207. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chromalox PF207 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
