Instruction/ maintenance manual of the product ESFS-42A Chromalox
Go to page of 4
The kit comes complete with all necessary wiring and mount- ing screws. A wall box plate is included for remote mounting of the selector switch and can be discarded if the switch is to be mounted on the heater.
INST ALLA TION Figure 4 WIRING The basic stock heater diagram (Figure 6) will be changed to the finished diagram (Figure 7). 1. Remove the red wire connecting the secondary of the control transformer to one side of the holding coil on the heater contac- tor, and discard.
REPLACEMENT P ARTS PCN Kit Model No. Description Relay P/N 305015 ESFS-40 Fan switch & relay 24 Volt control 2 pole relay 2-15 kW 072-306110-003 305058 ESFS-40A Fan switch & relay 24 Volt cont.
2150 N. RULON WHITE BLVD., OGDEN, UT 84404 Phone: 1-800-368-2493 www.chromalox.com Limited Warranty: Please refer to the Chromalox limited warranty applicable to this product at http://www.
An important point after buying a device Chromalox ESFS-42A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chromalox ESFS-42A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chromalox ESFS-42A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chromalox ESFS-42A you will learn all the available features of the product, as well as information on its operation. The information that you get Chromalox ESFS-42A will certainly help you make a decision on the purchase.
If you already are a holder of Chromalox ESFS-42A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chromalox ESFS-42A.
However, one of the most important roles played by the user manual is to help in solving problems with Chromalox ESFS-42A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chromalox ESFS-42A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
