Instruction/ maintenance manual of the product Mirage 2000 Christie
Go to page of 2
Mirage 2 000 Setting the benchmark for 3D projection Christie’ s Mirage 2000 has revolutionized the virtual r eality and simulation market, setting the benchmark for stereoscopic digital projection. Based on high-r esolution SXGA 3-chip DLP™ technology , the Mirage 2000 is the most economical SXGA 3D projector of its kind.
Brightness • 2000 ANSI lumens • Over 90% brightness uniformity Contrast Ratio (1.5-2.2:1 zoom lens) • 300:1 ANSI; 800:1 Full Field Resolution • T rue SXGA 1280 x 1024 chip resolution • 16.
An important point after buying a device Christie Mirage 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Christie Mirage 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Christie Mirage 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Christie Mirage 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Christie Mirage 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Christie Mirage 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Christie Mirage 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Christie Mirage 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Christie Mirage 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center