Instruction/ maintenance manual of the product 38-VIV204-01 Christie Digital Systems
Go to page of 44
User's Man ual 38-VIV204-01 MODEL.
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cord f or the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER MODE 22 VIDEO MODE 30 SETTING 35 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTIN.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM OF CABINET B ACK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near the vent.
8 PREP ARA TION SETTING-UP PR OJECT OR This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor.
9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 4.6 ’ (1.4m) ~ 48.3 ’ (14.7m). ● Refer to the figure below to adjust screen size. Screen Size Distance 40 ” 31 ” 4.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case.
S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G B R H/V V ( MONO ) 11 CONNECTING PR OJE.
S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H / V V ( MONO ) ON 1 DIP ON O.
13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INP.
14 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UT O PC ADJ. IMA GE P-TIMER LOCK INPUT 1/2 INPUT 3 LENS SHIFT OPERA TION OF REMO TE CONTR OL ON ALL OFF ALL-OFF SWITCH Left Side When using Remote Control Unit, turn this switch to “ ON.
15 BEFORE OPERA TION To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
16 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level.
17 HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast/Brightness/ White Balance (R/G/B)/Gamma] (Refer to P28) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter.
19 BEFORE OPERA TION TURNING ON THE PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate.
20 KEYST ONE ADJUSTMENT 1 Press KEYSTONE ▲ / ▼ button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 35.) Keystone dialog box appears. 2 Correct keystone distortion by pressing KEYSTONE ▲ / ▼ button or POINT UP/DOWN button(s).
21 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except the POINT, SELECT, RIGHT CLICK, P-TIMER and LASER buttons. Press NO SHOW button on Remote Control Unit to black out the image.
22 COMPUTER INPUT Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move the red frame pointer to INPUT Menu icon. Press POINT DOWN button and a red-arrow icon will appear. Move arrow to "RGB", and then press SELECT button.
23 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 26). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting.
24 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector.
25 COMPUTER INPUT NOTE : Fine sync., Total dots, Display area (H/V) and Full screen can not be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P23). Selects area displayed with this projector. Select the resolution in the Display area dialog box.
26 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 160 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
27 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move the red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move the red frame pointer to level that you want to set and then press SELECT button.
28 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operate as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move the red frame pointer to IMAGE ADJUST Menu icon.
29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move the red frame pointer to SCREEN Menu icon.
30 VIDEO INPUT When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move the red frame pointer to INPUT Menu icon.
31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear.
32 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move the red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move the red frame pointer to level that you want to set and then press SELECT button.
33 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move the red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move the red frame pointer to the item you want to adjust and then press SELECT button.
34 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move the red frame pointer to SCREEN Menu icon.
35 SETTING Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed. This function is used to project image to a rear projection screen.
36 SETTING This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life.
37 SETTING/APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.
38 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover.
39 APPENDIX LAMP REPLA CEMENT When the life of the Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow. When a projected image becomes dark or the color of an image becomes unnatural, replacement of Projection Lamp is required.
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 11 ~ 13.
41 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Check ALL-OFF switch on Remote Control Unit is set to “ ON. ” . ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from the projector when using Remote Control Unit.
Multi-media Projector 42 APPENDIX Accessories ● Specifications are subject to change without notice. TECHNICAL SPECIFICA TIONS 1.3" TFT Active Matrix type, 3 panels 18.5 lbs (8.4 kg) 12.6" x 6.6" x 18.5" (319 mm x 168 mm x 470 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.
43 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (supplied) is required.
Printed in Japan Part No. 10-A 610 299 6920 (1AA6P1P3320-- MA8K).
An important point after buying a device Christie Digital Systems 38-VIV204-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Christie Digital Systems 38-VIV204-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Christie Digital Systems 38-VIV204-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Christie Digital Systems 38-VIV204-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Christie Digital Systems 38-VIV204-01 will certainly help you make a decision on the purchase.
If you already are a holder of Christie Digital Systems 38-VIV204-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Christie Digital Systems 38-VIV204-01.
However, one of the most important roles played by the user manual is to help in solving problems with Christie Digital Systems 38-VIV204-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Christie Digital Systems 38-VIV204-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
