Instruction/ maintenance manual of the product 38-DHD103-XX Christie Digital Systems
Go to page of 12
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 1 of 12 pages Introduction Use the following instructions when installin g stacking frames onto the models listed in Table 1. Only use the stacking frame provided by Christie (104-117101-01) to hoist or stack a maximum of three projectors.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 2 of 12 pages Warnings Christie stacking hardware is required to prevent the top projector from sliding off the stack. Failure to incorporate this hardware may cause injury or death.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 3 of 12 pages 1. Stacking Frame Installation WARNING ALWAYS power down and unplug the projector prior to servicing. Wait for the internal cooling fans to stop before unplugging the unit.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 4 of 13 pages 2. Stacking Multiple Projectors Warnings Christie stacking hardware is required to prevent the top projector from sliding off the stack. Failure to incorporate this hardware may cause injury or death.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 5 of 12 pages 3. Loosen the nuts on the rear stacking legs to provide lateral movement for easier alignment with the stacking mounts on the other projector. For upright position: Release the rear stacking legs on the top projector.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 6 of 12 pages Hoisting Procedure Warnings Remove the projector lens before hoisting. The frame is designed to support a maximum stacking capacity of three projectors. Always stack before hoisting.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 7 of 12 pages Hoisting via Stacking Frame Handles WARNING When hoisting via the stacking frame ha ndles it is mandatory to use at least four rigging points (two o pposite sides). Straps must be placed on either side of designated label on the stacking frame handles.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 8 of 12 pages H oisting via Roadster/Mirage S+/Roadster HD12K Hardware WARNING When hoisting a stack combining Road ster/Mirage S.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 9 of 12 pages 1. If the projector is inverted retract the adjustable feet to prevent the hoisting hardware from becoming snagged. WARNING Always use at least two safety cables when hoisting.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 10 of 12 pages Projector Alignment Ensure the stacking legs are extended at least 1” and are slightly loose before aligning the projectors. Stacked projectors must be correctly aligned to one another so the resulting display is optimized and as sharp as possible.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 11 of 12 pages • If centerlines are out by the same amount from top to bottom — use lens offsets (on top projector) to bring the centerlines into alignment.
Stacking Frame Installation Instructions 013-100342-01 (Rev.1) (08/06) 12 of 12 pages Technical Support NORTH AMERICA CHRISTIE Digital Systems, Inc. 809 Wellington St. North Kitchener, Ontario, Canada N2G 4Y7 Tel. 519-744-8005 (General) Toll Free 1-800-221-8025 (Technical Support) Fax 519-749-2776 (Service) CHRISTIE Digital Systems, Inc.
An important point after buying a device Christie Digital Systems 38-DHD103-XX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Christie Digital Systems 38-DHD103-XX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Christie Digital Systems 38-DHD103-XX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Christie Digital Systems 38-DHD103-XX you will learn all the available features of the product, as well as information on its operation. The information that you get Christie Digital Systems 38-DHD103-XX will certainly help you make a decision on the purchase.
If you already are a holder of Christie Digital Systems 38-DHD103-XX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Christie Digital Systems 38-DHD103-XX.
However, one of the most important roles played by the user manual is to help in solving problems with Christie Digital Systems 38-DHD103-XX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Christie Digital Systems 38-DHD103-XX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
