Instruction/ maintenance manual of the product MTMPU Chief
Go to page of 12
INSTALLATION INSTRUCTIONS FUSION PORTRAIT MEDIUM TIL T MOUNT S p anish Product Description German Product Description Portuguese Product Description It alian Product Description Dutch Product Descript.
MTMPU Installation Instructions 2 DISCLAIMER Milestone A V T echnologies, and its af filiated corporations and subsidiaries (collectively “Mi les tone”), intend to make this manual accurate and complete.
Installation Instructions MTMPU 3 DIMENSIONS LEGEND 18.57 471.7 0 0 . 0 0 0.0 3.81 96.8 +10.5 MAX TIL T -3 MIN TILT 4.86 123.4 7.00 177.8 0.32 8.1 0 NOTES: MINIMUM HORIZONTAL MOUNTIN G PATTERN 3.937" [100 mm] MAXIMUM HORIZONTAL MOUNTING PATTERN WITHOUT SWITCHING KNOB, 15.
MTMPU Installation Instructions 4 TOOLS REQUIRED FOR INST ALLA TION PA R T S #2 7/32” (5.5mm) W ood S tud 3/8” (9.5mm) Concrete 3/16” (included) M5 (included) D3 (6) D5 (6) A (1) B (1) D1 (8) M4.
Installation Instructions MTMPU 5 INST ALLA TION The MTMPU mounts are design ed to be mounted to an 8" concrete, 8"x8"x16" concrete block or 2" x 4" wood studs (16" on center) wall . The MTMPU has brackets which allow the TV to be tilted.
MTMPU Installation Instructions 6 Figure 3 6. Drill one 7/32” (5.5mm) pilot hole in each stud. 7. Use t wo 5/16 x 2-1/2” lag bolts (E2) and two 5/16” fl at washers (E3) to attach top of mount to wall. (See Figure 3) 8. Mark the attachment point s for the lower mounting slots, making sure the at tachment points are located on the s t uds.
Installation Instructions MTMPU 7 Att aching Upright Bracket s to Display 1. V e rtically align the center of the up rights (B and C) with center of screen. (See Figure 5) NOTE: The diamon d-shape opening in the uprights (B an d C) corresponds to the vertical center of the upright.
MTMPU Installation Instructions 8 Figure 7 Att aching Display to W all Mount 1. Push upright brackets tabs all the way down so that the lower mounting slot is blocked. (See Figure 8) Figure 8 2. Hang the top hook of u pright br ackets onto the top bar of the mount.
Installation Instructions MTMPU 9 Adjusting Roll/Height of W all Brackets NOTE: The height adjust wall b racket allows adjustment of +/-1/2”. 1. Use 3/16” hex key (F) to turn height-adjust screws to right (tighten) to raise side of screen. (See Figure 10) 2.
MTMPU Installation Instructions 10.
Installation Instructions MTMPU 11.
MTMPU Installation Instructions USA/International A 6436 City West Parkway , Eden Prairi e, MN 55344 P 800 .582.6480 / 952.2 25.6000 F 877.894.6918 / 952 .894.6918 Europe A Franklinstraat 14, 6003 DK W eert, Nethe rlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No.
An important point after buying a device Chief MTMPU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief MTMPU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief MTMPU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief MTMPU you will learn all the available features of the product, as well as information on its operation. The information that you get Chief MTMPU will certainly help you make a decision on the purchase.
If you already are a holder of Chief MTMPU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief MTMPU.
However, one of the most important roles played by the user manual is to help in solving problems with Chief MTMPU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief MTMPU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
