Instruction/ maintenance manual of the product MSP-DCCMD Chief Manufacturing
Go to page of 10
INSTALLATION INSTRUCTIONS CHIEF MANUF ACTURING INC . 1-800-582-6480 952-894-628 0 F AX 952-894-6918 8401 EAGLE CREEK P ARKW A Y , STE 700 SA V AGE, MINNESOT A 55378 USA 8832-0000 88 Rev .
Model MSP-DCCMD Installation Instructions 2 IMPORT ANT W ARNINGS AND CAUTIONS! W ARNING: A WARNING alerts you to the possibility of serious in jury or death if you do no t follow the instructions. CAUTION: A CAUTION alerts you to the poss ibility of damage or destruction of equipment if you do not follow the correspond ing instruction s.
Installation Instructions Model MSP-DCCMD 3 CONTENTS TOOLS REQUIRED FOR INST A LLA TION • Electric drill and bit set • Hex wrench set • Phillips screwdriver • Level NOTE: Other tools may be required depending on the mounting surface and me thod of installation.
Model MSP-DCCMD Installation Instructions 4 PA R T S Figure 1: JWD P ARTS Centris Interface (see notes) Set Screw (see notes) 130 140 150 160 170 180 20 30 40 50 60 70 80 90 11 0 120 190 100.
Installation Instructions Model MSP-DCCMD 5 P ARTS (Continued) T able 2 below provides a list of the JWD pa rts. NOTES: ‡The M4 x 12mm screws (60) are used on the C entris interface for flush mount applications. *The M4 x 30mm screws (40) with sp acers (100) are for recessed mount app lications.
Model MSP-DCCMD Installation Instructions 6 W ALL BRACKET INST ALLA TION Secure W all Bracket W ARNING: It is the responsibility of the installer to verify that t he surface to which the mount is an chored will safely support the comb ined load of all attached component s and equipment.
Installation Instructions Model MSP-DCCMD 7 INST ALLA TION (100mm x 100mm) Flush Mount Centris Bracket to Display 1. Install two M4 x 12mm screws (60) into the top mounting h oles (not sho wn) on the display . 2. Align the mounting holes on the Centris bracke t with the screws installed on the display .
Model MSP-DCCMD Installation Instructions 8 INST ALLA TION (200mm x 100MM) Att ach Interface Adapter to Display 1. Select six M4 screw s (80) and six spacers (190) from part s bag. 2. Place dis play face do wn on a clea n dry surfac e. 3. Install six M4 screws (80) into the six mounting holes on the interface bracke t (140).
Installation Instructions Model MSP-DCCMD 9 INST ALLA TION (400 mm x 200MM and 550mm x 235MM) Att ach 400mm x 200mm Interface Adapter NOTE: Used for 400mm x 200mm hole patterns. 1. Select six M6 screw s (30) and six spacers (120) from part s bag. 2. Place display fa ce down on a clean dry sur face.
Model MSP-DCCMD Installation Instructions 10 CABLE MANAGEMENT W ARNING: Make sure your cables do not run through a pinch point. 1. Connect and secure power/audio/video cabl es, making sure to leave sufficient slack to allow for movement of the dis play .
An important point after buying a device Chief Manufacturing MSP-DCCMD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief Manufacturing MSP-DCCMD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief Manufacturing MSP-DCCMD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief Manufacturing MSP-DCCMD you will learn all the available features of the product, as well as information on its operation. The information that you get Chief Manufacturing MSP-DCCMD will certainly help you make a decision on the purchase.
If you already are a holder of Chief Manufacturing MSP-DCCMD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief Manufacturing MSP-DCCMD.
However, one of the most important roles played by the user manual is to help in solving problems with Chief Manufacturing MSP-DCCMD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief Manufacturing MSP-DCCMD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
