Instruction/ maintenance manual of the product LCM1UP Chief
Go to page of 12
INSTALLATION INSTRUCTIONS LCM1UP (Shown in st alled to CPA Series extensio n column as example on ly) Single Portrait Flat Panel Ceiling Mount s S p anish Product Description German Product Descriptio.
LCM1UP Installation Instructions 2 DISCLAIMER Milestone A V T echnologies and its affiliated corporations and subsidiaries (collectively "Mile stone"), intend to make this manual accurate and complete.
Installation Instructions LCM1UP 3 DIMENSIONS DIMENSIONS: INCHES [MILLIMETERS].
LCM1UP Installation Instructions 4 LEGEND T ighten Fastener Apretar e lemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations.
Installation Instructions LCM1UP 5 TOOLS REQUIRED FOR INST ALLA TION PA R T S #2 1/2" or 13mm 3/32" (included) 1/8" (included) 5/32" (included) M5 (include d) C (6) E (6) [Interfac.
LCM1UP Installation Instructions 6 INST ALLA TION W ARNING: F AILURE TO PROVIDE ADEQUA TE STRUCTURAL STRENGTH FOR THIS COMPONENT CAN RESUL T IN SERIOUS PERSONAL INJUR Y OR DAMAGE TO EQUIPMENT! It is t.
Installation Instructions LCM1UP 7 5. Install and tighten two 5/16" x 3/4" set screws (X) through back of mount (CC) and against column. (See Figu re 4) Figure 4 Att aching Interface Bracket s to Display 1. Lower the latch mechanism on each interface bracket (FF).
LCM1UP Installation Instructions 8 Att aching Display to Ceiling Mount 1. Ensure that the latch mechanisms on interface brackets (FF) are already lo wered. (See Figure 5) 2. While supporting both sid es of display , lower display onto ceiling mount, hooking top of interface brackets onto front of ceiling mount.
Installation Instructions LCM1UP 9 Tilt The ceiling mounts allow -5° to 20° tilt. Th e ceiling mount can be locked at 0°, 5°, 10° and 15° tilt. 3. Loosen two tilt fricti on screws (located each side). (See Figure 10) 4. Adjust tilt as required. Note specific degrees of tilt.
LCM1UP Installation Instructions 10 2. Install back cover (DD) into four holes on back of ceiling mount. (See Figure 14) Figure 14 3. Install one side cover (EE) onto side of ceili ng mount using two 10-24 x 1/2" flat head screws (W). (See Figure 15) 4.
Installation Instructions LCM1UP 11.
LCM1UP Installation Instructions USA/International A 6436 City West Parkway , Eden Prairie, MN 55344 P 800.582.6480 / 952 .225.6000 F 877.894.6918 / 952 .894.6918 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Of fice No.
An important point after buying a device Chief LCM1UP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief LCM1UP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief LCM1UP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief LCM1UP you will learn all the available features of the product, as well as information on its operation. The information that you get Chief LCM1UP will certainly help you make a decision on the purchase.
If you already are a holder of Chief LCM1UP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief LCM1UP.
However, one of the most important roles played by the user manual is to help in solving problems with Chief LCM1UP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief LCM1UP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
