Instruction/ maintenance manual of the product 90045 Chicago Electric
Go to page of 16
BEL T SANDER 3” X 21” Model 90045 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2003 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 90045 CONTENTS IMPORT ANT SAFETY INFORMA TION ................................. 3 GENERAL POWER T OOL SAFETY W ARNINGS ........................................... 3 BEL T SANDER SAFETY W ARNINGS .
Page 3 For technical questions, please call 1-800-444-3353. SKU 90045 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 4 For technical questions, please call 1-800-444-3353. SKU 90045 increased risk of electric shock if your body is grounded. Do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock.
Page 5 For technical questions, please call 1-800-444-3353. SKU 90045 Disconnect the plug from the c. power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally .
Page 6 For technical questions, please call 1-800-444-3353. SKU 90045 Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
Page 7 For technical questions, please call 1-800-444-3353. SKU 90045 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
Page 8 For technical questions, please call 1-800-444-3353. SKU 90045 Protect the extension cords from sharp 8. objects, excessive heat, and damp or wet areas. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25’ 50’ 75’ 100’ 150’ 0 – 2.
Page 9 For technical questions, please call 1-800-444-3353. SKU 90045 SPECIFICA TIONS Electrical Input 120 V~ / 60 Hz / 7.5 A (Rated) Belt Speed Belt Size 3” x 21” Accessories Dust Bag / 120 Grit Belt E194601 UNP ACKING When unpacking, make sure that the item is intact and undamaged.
Page 10 For technical questions, please call 1-800-444-3353. SKU 90045 off the Belt Sander . (See Figures A and B.) T o Attach The Dust Bag: DUST B A G (69) Figure C T o attach the Dust Bag (69), simply clip the opening of the Dust Bag onto the Dust P or t located on the Left Housing (18).
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 90045 W ARNING! When sanding a 2. workpiece, always push and pull the Belt Sander over the workpiece with both hands rmly gripping the tool. Do not pass hands or ngers directly in front of, to the rear , or below the Sanding Belt (46).
Page 12 For technical questions, please call 1-800-444-3353. SKU 90045 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
Page 13 For technical questions, please call 1-800-444-3353. SKU 90045 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. Cord not connected. 1. No power at outlet. 2. T ool’s thermal reset breaker 3. tripped (if equipped).
Page 14 For technical questions, please call 1-800-444-3353. SKU 90045 Part Description 1 Close Cover (18) 2 Bearing (626) 3 Shaft Gear 4 Bearing (608) 5 Dust Suction Cover 6 Fan 7 Screw (ST3.
Page 15 For technical questions, please call 1-800-444-3353. SKU 90045 ASSEMBL Y DIAGRAM REV 04l, 10e 65 64 63 62 33 67 4 58 4 56 48 47 54 37 70 23 52 53 41 32 68 29 30 31 24 28 27 26 25 20 38 49 55 23 22 21 20 19 66 18 40 34 35 36 37 42 43 44 45 46 33 7 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 69: DUST BA G NO T SHO WN.
Page 16 For technical questions, please call 1-800-444-3353. SKU 90045 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and.
An important point after buying a device Chicago Electric 90045 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 90045 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 90045 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 90045 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 90045 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 90045, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 90045.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 90045. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 90045 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
