Instruction/ maintenance manual of the product LED 360 Chauvet
Go to page of 18
User Manual.
CHAUVET®, 2010, Al l Rights Reserved Information and specif ications in this User M anual are subject to cha nge without notice. CHAUVET® assumes no responsibility or liability for a ny errors or inacc uracies tha t may appear in th is manual. Rev01b T ABLE OF C ONTENT S 1.
1. Before You Begin 3 8/31/2010 4:41 PM 1. B EFORE Y OU B EGIN What is inc luded 1 x Mini M oon ™ LED 360 1 x Mo unting Bracket with nut s (2), washers (2) & bol ts (2) 1 x Pow er Co.
1. Before You Begin 4 8/31/2010 4:41 PM Safety Instructions Please keep thi s User Manual for f uture consulta tion. If you sell the unit to an other user, be sure tha t they also re ceive this in struction bookle t.
2. Introduction 5 8/31/2010 4:41 PM 2. I NTRODUCTION Compact, panning L ED moon flower effe ct with 540-degree s of rotation Combines a multi-colored bea m effect and a moving head into a sing.
2. Introduction 6 8/31/2010 4:41 PM Product Ov erview Front lens DMX In Bracket Adjustme nt Knob Hanging Bracket (2) DMX Out Power Out Fuseholder Power In Microphone Sensitivity Adjustment Knob Contro.
3. Setup 7 8/31/2010 4:41 PM 3. S ETUP AC Po wer This fixture runs on 100~240 V AC, 50/60 Hz. Be fore powe ring on the unit, make sure the line voltage to which yo u are connec ting it is w ithin the rang e of accepted voltages.
3. Setup 8 8/31/2010 4:41 PM Mounting Orientation The Mini Moon™ LED 360 may be mounted in any po sition prov ided there is adequ ate room for ventilation. Rigging Be sure that the structure can support the w eight of the fix ture. Plea se see the “Techn ical Specification s” section of th is manual for a detailed w eight listing.
4. Operating In structions 9 8/31/2010 4:41 PM 4. O PERATING I NSTRUCTIONS Configuring the Starting A ddress The Mini Moon™ LED 360 fix ture uses seven DM X channe ls. The highest channel tha t the fix ture may be set to in order to fun ction pr operly is 506.
4. Operating In structions 10 8/31/2010 4:41 PM DMX Operation This is the oper ating mode, wh ich will allow for control using an extern al DMX controller . You must set the star ting address for this mod e. If this is your first time using DM X, refer to t he “DMX Primer” section in the Appendix of this manual.
4. Operating In structions 11 8/31/2010 4:41 PM Automatic This fixture has five preprogra mmed chas es with adjus table speed . Access the se via the control panel of the fron t of the fix ture. Please see the instructions below for further de tails. 1.
4. Operating In structions 12 8/31/2010 4:41 PM DMX Channel Values C HANNEL V A LUE F UNCTION 1 000 255 Pan 0~540° 2 000 255 Pan speed Fast ~ Slow 3 000 006 007 0 14 0 15 022 023 .
5. Appendix 13 8/31/2010 4:41 PM 5. A PPENDIX General Troubles hooting S YMPTOM P OSSIBLE C AUSE ( S ) P OSSIBLE A CTION ( S ) Breaker/Fuse keeps blow ing E xcessive cir cuit load Check total load placed on the electrical circuit .
5. Appendix 14 8/31/2010 4:41 PM DMX Primer There are 512 chan nels in a DMX connection. A fixture capable o f receiving DMX will require one or a number of sequential chann els. The u ser must a ssign a starting address on the fixture that indicates the firs t channel re served in the controller.
5. Appendix 15 8/31/2010 4:41 PM Cable Conn ectors Cabling must have a male X LR connector on one end and a female XLR connector on the other end. Do not allow co ntact between th e common an d the fixture’s chass is ground. Ground ing the common can cause a grou nd loop , and your fixture may per form erratical ly.
5. Appendix 16 8/31/2010 4:41 PM 3-Pin to 5-Pin Con version Chart If you use a contr oller with a 5-p in DMX output connector, y ou will need to use a 5-pin to 3-pin adapter.
5. Appendix 17 8/31/2010 4:41 PM General Mainten ance To maintain opti mum performan ce and minimize wear, fix tures shoul d be cleaned frequ ently. Usage and enviro nment are con tributing fa ctors in deter mining frequ ency. As a gene ral rule, fixtures should be cleaned at least twice a month.
T ECHNICAL S PECIFICATIONS WEIGHT & DIMEN SIONS Length .......................................................................................................... 5.7 in ( 145 mm) Width ..............................................................
An important point after buying a device Chauvet LED 360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chauvet LED 360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chauvet LED 360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chauvet LED 360 you will learn all the available features of the product, as well as information on its operation. The information that you get Chauvet LED 360 will certainly help you make a decision on the purchase.
If you already are a holder of Chauvet LED 360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chauvet LED 360.
However, one of the most important roles played by the user manual is to help in solving problems with Chauvet LED 360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chauvet LED 360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
