Instruction/ maintenance manual of the product TCR2 Chamberlain
Go to page of 4
® TRICODE ® TCR2 DUAL CHANNEL RECEIVER USED FOR TCR1 AND TCR2 The TriCode ® digital receivers are designed for use with automatic garage/gate operators and access control systems. All TriCode ® products may be matched with Linear/Delta-3 TM , Multi-Code TM , and Stanley TM radio products which may already be installed.
2 POWER SWITCH SETTINGS P3 24V 12V JUMPER (P3) Back Vie w 24V 12V P3 Mounting Holes Figure 1 Power Supply Selection Setting The TriCode ® receiver is factory set for 24 volt power input if 12 volt is required. Remove back cover of receiver by removing screws.
3 OUTPUT RELAYS & CONFIGURATION SWITCH SETTINGS Figure 2 Delta-3/ Linear Multi-Code Stanley 310 MHz 300 MHz 310 MHz TM TM TM Configuration Switch Setting the Configuration Switch The TriCode ® receiver is factory set for Linear/Delta-3 TM . Locate the configuration switch and set it to the desired RF mode of operation (Figures 2 and 3).
© 2007, The Chamberlain Group, Inc. 01-17468D All Rights Reserved Setting DIP Switch The TriCode ® Receiver DIP switch CH1 is factory set OFF (1-10) and CH2 is factory set ON (1-10). Locate the 10 position DIP switch. If this is a new installation using TriCode ® transmitters, randomly set switches matching those of the transmitter.
An important point after buying a device Chamberlain TCR2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chamberlain TCR2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chamberlain TCR2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chamberlain TCR2 you will learn all the available features of the product, as well as information on its operation. The information that you get Chamberlain TCR2 will certainly help you make a decision on the purchase.
If you already are a holder of Chamberlain TCR2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chamberlain TCR2.
However, one of the most important roles played by the user manual is to help in solving problems with Chamberlain TCR2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chamberlain TCR2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
