Instruction/ maintenance manual of the product HG654320NM AEG
Go to page of 20
HG654320NM IE GB EN GAS HOB USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 6 Installation 12 Product description 13 Operation 14 Helpful hints and tips 15 Care and cleaning 16 What to do if… 17 Technical data 18 Environment concerns The follow.
SAFETY INFORMATIO N WARNING! These instructions are only valid in the countries whose symbols appear on this booklet's cover. For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it.
• Pots must not enter the control zone. • Do not use not stable cookware to prevent from tilt and accident. • Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) and/or fabrics in, near or on the appliance.
• This appliance is not connected to a combustion products evacuation device. It must b e installed and connected in accordance with current installation regulations. Particular attention must be given to the relevant requirements regarding ventilation.
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regula- tions (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI - Domestic Gas Instal- lation I.
1 2 3 1 End of shaft with nut 2 Washer 3 Elbow Connection to the gas supply should be with either rigid or semi - rigid pipe, i.e. steel or cop- per. The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
1. Light the burner. 2. Turn the knob on the minimum position. 3. Remove the knob. 4. With a thin screwdriver, adjust the by - pass screw position. 1 1 The by - pass screw – If you change from natural gas 20 mbar to liquid gas, fully tighten the adjustment screw in.
This hob is designed to be connected to a 230 V 50 Hz AC electrical supply . Before switching on, make sure the electri city supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. The hob is supplied with a 3 core flexible supply cord incorporating a 3 amp plug fitted.
Replacement of the connection cable To replace the connection cable use only H05V2V2 - F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow / green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.
b) Space for connections Kitchen unit with oven The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continuous supply of air. The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven fr om the unit.
OPERATION Ignition of the burner WARNING! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame Always light the burner before you put cookware. To light the burner: 1. Turn the control knob counterclockwise to the maximum position ( ) and push it down.
If the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute. The spark generator can start automatically when you switch on the mains, after installa- tion or a power cut. It is normal.
CARE AND CLEANING WARNING! Switch the appliance off and let it cool down before you clean it. Disconnect the appliance from the electrical supply, before carrying out any cleaning or maintenance wo rk. WARNING! For safety reasons, do not clean the appliance with steam cleaners or high - pressure clean- ers.
Cleaning of the spar k plug This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed.
Labels supplied with the accessories bag Stick the adhesive labels as indicated below: MOD. PROD.NO. SER.NO DA T A MOD. PROD.NO. SER.NO DA T A MODEL MODEL MOD.
TOTAL POWER: G20 (2H) 20 mbar = 8 kW G30 (3+) 28 - 30 mbar = 567 g/h G31 (3+) 37 mbar = 557 g/h Electric supply: 230 V ~ 50 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp cartri.
please contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging material The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc.
www.aeg.com/shop 397201801 - B - 052011.
An important point after buying a device AEG HG654320NM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG HG654320NM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG HG654320NM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG HG654320NM you will learn all the available features of the product, as well as information on its operation. The information that you get AEG HG654320NM will certainly help you make a decision on the purchase.
If you already are a holder of AEG HG654320NM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG HG654320NM.
However, one of the most important roles played by the user manual is to help in solving problems with AEG HG654320NM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG HG654320NM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
