Instruction/ maintenance manual of the product 40072 Central Pneumatic
Go to page of 12
AIR ST APLER 1/4 ” CROWN, 18 GAUGE Models 40072 / 40073 / 97521 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 W ARNING – When using tools, basic precautions should always be followed, including the following: General a. T o reduce the risks of electric shock, re, and injury to persons, read all the instructions before using the tool.
Page 4 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 T ool use and care a. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and can lead to loss of control.
Page 5 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SPECIFIC SAFETY INSTRUCTIONS 1. Operators and others in work area MUST wear ANSI-approved safety goggles with side shields during use. The employer is responsible to enforce the use of eye protection by the operator and others in the work area.
Page 6 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 22. Obey the manual for the air compressor used to power this tool. 23. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency , even if a hose is ruptured.
Page 7 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SPECIFICA TIONS Operating Pressure 60-100 PSI Staple Capacity 80 Staple Length / T ype 3 / 4 ” to 1- 1 / 2 ”, 1 / 4 ” Crown, .
Page 8 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 With the T rigger held, carefully lift the nailer and press it against the workpiece again. The tool must not cycle (re) . If it fails to act in the manner explained in bold, have it repaired by a qualied service technician.
Page 9 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 3. FIGURE 2 Safety (52) Safety Cover (54) Lift the Safety Cover (54) off the top of the stapler - see Figure 2 .
Page 10 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 ASSEMBL Y DIAGRAM.
Page 12 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 90 Day W arranty Harbor Freight T ools Co. makes every ef fort to assure that its products meet high qual.
An important point after buying a device Central Pneumatic 40072 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Central Pneumatic 40072 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Central Pneumatic 40072 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Central Pneumatic 40072 you will learn all the available features of the product, as well as information on its operation. The information that you get Central Pneumatic 40072 will certainly help you make a decision on the purchase.
If you already are a holder of Central Pneumatic 40072, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Central Pneumatic 40072.
However, one of the most important roles played by the user manual is to help in solving problems with Central Pneumatic 40072. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Central Pneumatic 40072 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
