Instruction/ maintenance manual of the product SC612 CDA
Go to page of 24
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .
2 Important This appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may lead to premature failure of the appliance. The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product.
3 Appliance Model Serial Number CE Declarations of Conformity: This oven has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC (L ow voltage) and requirements of EMC Directive 2004/108/EEC.
4 Important • R ead the user instructions carefully before using the oven for the first time. • Follow the instructions for first use of the oven. • Clean the oven regularly . • R emove spills as soon as they occur . • Always use oven gloves when removing shelves and trays from the ovens.
5 • Do not attempt to repair the internal workings of your oven. • Do not cover the oven floor with aluminium foil. First Use of the Oven First use • The metal casing of this appliance has been coated with a preservative to protect it during transport and storage.
6 Please note: • This oven has been fitted with a cooling fan to achieve maximum eciency and to maintain low surface temperatures. The cooling fan will switch on automatically when the oven switches on.
7 SC212 and SC222 Defrost Using the fan only this oven function circulates the air around the oven cavity , speeding up the natural defrost process (1kg takes appro ximately one hour , depending on the type of food).
8 For each grill function please note: • Always grill with the oven door closed. • Put the grill pan as close to the grill as possible. • Do not grill for more than 30 minutes at a time. • Preheat the grill for up to five minutes with the oven door closed.
9 Full Grill This function radiates the heat from the grill element and the top element. This fully temperature variable grill is ideal for grilling a full family meal. It can be set between 50 ° C and 250 ° C maximum. W arming Oven Using heat produced only by the bottom element, this natural heat is perfect for dough proving and blind- baking.
10 fig. 1 1 2 3 4 5 6 7 1 Cooking time indicator 2 End of cooking time indicator 3 Minute minder indicator 4 Current time indicator 5 Decrease key 6 Mode key 7 Increase key Programming the Oven Please note: • The alert beep will cut o after two minutes if it is not switched o manually .
11 T o set the minute minder: • T ouch repeatedly until the minute minder indicator flashes. • Then touch or to select the required duration for the minute minder . When the correct duration shows on the display , either touch or wait for appro ximately five seconds.
12 Programming the Oven Semi-automatic cooking The main oven can be set to switch o automatically at a preset time up to a maximum of 10 hours. T o set a semi-automatic cooking programme: • Select the oven function and temperature (the oven will switch on) • T ouch until the cooking time indicator flashes.
13 • Then touch or to select the required end of cooking time. When the correct time shows on the display , wait for appro ximately five seconds. The cooking time and end of cooking time indicators will remain lit to confirm the automatic programme is on.
14 Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
15 • Never replace the bulb with bare hands as contamination from your fingers can cause premature failure. Always use a clean cloth or gloves. Please note: The bulb replacement is not covered by your guarantee. Care and Maintenance The oven exterior As the oven has a stainless steel or enamel surface, you should use a nonabrasive cleaner .
16 IMPORT ANT • Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . • If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
17 When correctly installed ensure that there is a gap of 4mm minimum between the sides of the oven and adjacent furniture doors. Lift the oven carefully into position on the shelf , taking care NOT to lift it by the door handle. If you lower the oven door , you will see 4 screw holes, 2 on each side of the oven.
18 Oven Door R emoving the Oven Door The oven door can easily be removed as follows: • Open the door to the full extent (fig. 4). • Open the lever A completely on the left and right hinges (fig. 5). • Hold the door as shown in fig. 8. • Gently close the door (fig.
19 Electricity Supply to Y our Oven W arning! this appliance must be earthed. This appliance must be connected by a competent person, using fix ed wiring via a double pole switched fused spur outlet, protected by a 13A fuse. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.
20 NO TES:.
21 NO TES:.
22 NO TES:.
23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice.
Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www.
An important point after buying a device CDA SC612 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA SC612 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA SC612 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA SC612 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA SC612 will certainly help you make a decision on the purchase.
If you already are a holder of CDA SC612, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA SC612.
However, one of the most important roles played by the user manual is to help in solving problems with CDA SC612. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA SC612 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
