Instruction/ maintenance manual of the product SC220L CDA
Go to page of 32
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
2 Important This appliance is designed and manufactur ed solely for the cooking of domestic (household) f ood and is not suitable for an y non domestic application and ther ef ore should not be used in a commercial envir onment. The applianc e guar antee will be void if the appliance is used within a non domestic envir onment i.
3 Befor e Using for the Fir st Time – Read the instructions car efully befor e installing and using the applianc e. – After unpacking the appliance, check that it is not damaged. In case of doubt, do not use the appliance and contact your supplier or a qualified engineer .
4 Important Saf eguar ds and R ecommendations – Do not carry out any cleaning or maintenance without fir st disconnecting the applianc e from the electrical supply. – During and after use of the oven, cert ain parts will become very hot. Do not touc h hot parts.
5 Contr ol Panel Contr ols Description 1 . Oven thermostat knob 2. Oven switc h knob 3. Electronic pr ogr ammer W arning Lights: 4. P ower on indicator lamp 5. Oven thermostat indicator light Please Note: This appliance incorporates a safety cooling fan which you will hear operating whenever the oven or grill ar e in use.
6 Fan Ov en Gener al Featur es The heating and cooking in electrical hot air ovens tak e place by for ced c onvection. The two elements whic h make this pr ocess take plac e are: – Grill element 200.
7 Fig. 3 How t o Use the Ov en W ARNING: The door is hot, use the handle. A TTENTION - MOST IMPOR T ANT Pa y special at tention no t to touch the ho t heating element inside the ov en ca vity . Thermostat Knob (Fig. 2) This only sets the cooking temperatur e and does not switch the oven on.
8 Hot Air C ooking The circular element and fan come on. The heat is dispersed by f orced convection and the temperature can be regulated to between 50 °C and 225 °C via the thermostat knob.
9 Cooking A dvice St erilization Sterilization of f oods to be conserv ed, in full and hermetically sealed jars, is done in the f ollowing way: a. Set the switch to position . b. Set the thermostat knob to position 1 85 °C and preheat the oven. c. Fill the dripping pan with hot water .
10 Electr onic Pr ogr ammer The electronic progr ammer is a device that groups together the following functions: – 24 hour clock with illuminated display – Timer (up to 23 hours and 59 minut es) – Programme f or automatic oven c ooking – Programme f or semi-automatic oven c ooking.
11 Electr onic Clock (fig. 5) The programmer is equipped with an electr onic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a pow er cut, three zer os will flash on the progr ammer display .
12 A U T O A U T O Aut omatic Ov en Cooking T o cook food automatically in the ov en, it is necessary to: 1 . Set the length of the cooking time 2. Set the end of the cooking time 3. Set the temperatur e and the oven c ooking progr am. These operations ar e done in the following w ay: 1 .
13 Semi - Aut omatic Cooking This is used to switc h the oven off automatically aft er the desired c ooking time has elapsed. There ar e tw o ways t o set the semi-automatic cooking function: 1 . Set the length of time you need to cook the food by pushing the button and the button to advance, or to go backwar ds (Fig.
14 Do’s and do not’s – Do always grill with the ov en door closed. – Do read the user instructions car efully bef ore using the ov en for first time. – Do allow the oven to heat for one and a half hours, befor e using for the first time, in order to expel any smell from the new ov en insulation, without the introduction of f ood.
15 Car e and Maintenanc e It is advisable to clean when the appliance is cold and especially for cleaning the enamelled parts. Av oid leaving alkaline or acidic substances (lemon juice, vinegar , etc.) on the surfaces. Av oid using cleaning products with a c hlorine or acidic base.
16 St ainless St eel, Aluminium, Paint ed Parts and Silk-scr een Printed Surfac es Clean using an appropriat e product. Alw ays dry thor oughly. Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner . IMPOR T ANT : these parts must be cleaned very car efully t o av oid scrat ching and abrasion.
17 Replacing the Ov en Light W ARNING: Ensure the appliance is swit ched o ff befor e replacing the lamp to a v oid the possibility of electric shoc k. – Let the oven ca vity and the heating elements to cool down; – Switch off the electrical supply; – Unscrew the pr otectiv e cover C (fig.
18 Assembling and Dismantling of the Side R unner Fr ames – Assemble the wire r acks t o the oven walls using the 2 scr ews (Fig. 1 3). – Slide the tray and rac k into the runners (Fig. 1 4). The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
19 Ov en Door Depending on the model, the oven door is hinged either on the left or the right. Not e: The oven door should only be removed by an authorised service agent. Removal of the oven door by a non-authorised person will invalidate the guar antee.
20 E F F E Replacing the inner pane o f glass T o replace the inner pane of the door oper ate as f ollows: – Check that the f our rubber pads are in plac e ( D in Fig. 1 8). – Whilst one person holds the door still, a second person should insert the inner pane in the left E and right F side guides (fig.
21 AD VICE FOR THE INS T ALLER Important Appliance installation and maintenanc e must only be carried out b y QU ALIFIED TE CHNICIANS and in compliance with the local saf ety standar ds. • Failur e to observe this rule will in validate the warr anty.
22 Important The oven can be fitted in standar d units, width and depth 60 cm. Installation requir es a compartment as illustrated in figur es 23 and 24.
23 T o ensure internal v entilation, aeration c hannels must be provided as illustr ated in the figur es 25 and 26. 30 mm 600 50 mm 50 550 Fig. 25 Fig.
24 Fixing the Ov en Introduc e the oven into the furnitur e opening and fix it with scr ews (not supplied) as figure 2 7 . It is essential that the oven rests on a surface which will support its weight, as the screw fixing is only complementary .
25 IMPOR T ANT : – T o avoid damage to the low er trim please note the f ollowing instructions. – The lower trim is designed to allow f or good air cir culation and the corr ect opening of the oven door .
26 Mains Electricity Connection Incorr ect installation ma y be danger ous and the manufacturer can no t be held responsible. W arning! This appliance must be earthed The manufactur er declines all responsibility for an y problem caused b y failur e to observ e this rule.
27 Connection o f the P ow er Supply Cable Unhook the terminal boar d cover by inserting a scr ewdriver into the tw o hooks “ A ” (fig. 30). Open the cable gland by unscrewing screw “F” (fig. 3 1), unscrew the terminal scr ews and remove the cable.
28 Appliance Servicing CDA pr ovide a quality and eff ective after -sales service to cover all your servicing needs. Please attac h your r eceipt to this page f or safekeeping. Please help us to help you by ha ving the following inf ormation available when booking a servic e-call: 1 .
29 Guar ant ee CDA applianc es carry a five-year parts and a one-year labour guar antee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts char ges.
30.
31.
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu T o cont act our Customer Car e Department, or for Servic e, please contact us on the det ails below .
An important point after buying a device CDA SC220L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA SC220L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA SC220L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA SC220L you will learn all the available features of the product, as well as information on its operation. The information that you get CDA SC220L will certainly help you make a decision on the purchase.
If you already are a holder of CDA SC220L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA SC220L.
However, one of the most important roles played by the user manual is to help in solving problems with CDA SC220L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA SC220L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
