Instruction/ maintenance manual of the product F 55402 IM AEG
Go to page of 16
FAVORIT 55402 VI 0P EN User manual.
CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufa cturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the ap pliance for future reference.
WARNING! Dangerous voltage. • If the water inlet hose is damaged, im- mediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose.
2. PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper sp ray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutler y basket 10 Lower basket 11 Upper basket 2.1 Light beam • When a programme ope rates, a red light beam shows on the floor below the appliance door.
Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme oper- ates.
Information for test institutes For all the necessary info rmat ion for t est per forma nce. send a n email to: info.test@dishwasher-productio n.com Write down the product numb er (PNC ) that is on the rating plate. 5. OPTIONS Activate the Multitab option be- fore you set a programme.
water authority to know the wat er hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to re- move them. Do not use dete rgent and do not load the baskets.
6.2 Filling the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Put 1 litre of water in the salt con- tainer (only for the first time). 3. Fill the salt container with dishwash- er salt. 4. Remove the salt around the opening of the salt container.
5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ).
1. Press and hold at the same time but- tons and until all the programme indicators come on. Cancelling the programme 1. Press and hold at the same time but- tons and until all the programme indicators come on. Make sure that there is detergent in the detergent disp enser be- fore you start a new program me.
• Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery bas- ket.
6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides ( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance.
Problem Possible solution Make sure that the pr essure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) 446 / 818 - 898 / 550 Electrical connection Refer to the rating plate. Volta ge 220-240 V Frequency 50 Hz Water supply pressure Min.
www.aeg.com/shop 117932982-A-212013.
An important point after buying a device AEG F 55402 IM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG F 55402 IM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG F 55402 IM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG F 55402 IM you will learn all the available features of the product, as well as information on its operation. The information that you get AEG F 55402 IM will certainly help you make a decision on the purchase.
If you already are a holder of AEG F 55402 IM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG F 55402 IM.
However, one of the most important roles played by the user manual is to help in solving problems with AEG F 55402 IM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG F 55402 IM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
