Instruction/ maintenance manual of the product EVP61 CDA
Go to page of 12
1 Customer Care Department • The Group Ltd. • Harb y Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .
2 Impor tant The manufacturer cannot be held responsible for injuries or losses caused by inc orrect use or installation of this product. Please note that the manufacturer reserves the right to invalidat e the guarantee supplied with this product following incorr ect installation or misuse of the appliance or use in a commercial en vironment.
3 Using your Extractor For best performance, y ou should switch on the extractor 15 minutes before starting to cook and leave it to run f or approximately 15 minutes after the end of cooking.
4 Care and Maintenanc e IMPORT ANT : DO NO T PERFORM MAINTENANCE OR CLEANING OF THE EXTRACTOR WITHOUT FIRST SWIT CHING OFF THE ELECTRICIT Y SUPPL Y . Cleaning Y ou should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings.
5 C D Fig . 4 Changing the Light DO NOT CHANGE THE LIGHT BULB IMMEDIA TEL Y AFTER USE AS THE BULB WILL BE HOT . ALLOW IT TO C OOL BEFORE REMOVING IT . Unscrew the light bulb cov er , please see gure 4. Unscrew the light bulb and replace with a 12V 20W halogen light bulb .
6 DOUBLE POLE SWITCHED FUSED SPUR OUTLET USE A 3 AMP FUSE Mains Electr icity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y BY A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET AND PROTECTED BY A 3A FUSE.
7 Electrical I nformation Mains electrical voltage: 230 – 240V ac, 50Hz T otal rated power consumption: 290W T roubleshooting If your extractor is not working: 1. Check that the mains supply has not been switched o . 2. Check that the fuse in the spur has not blown.
8 Mounting your Extractor When the extractor is to be installed above an electric hob, the minimum distance between the hob and extractor must exceed 600mm (650mm is recommended). When the extractor is to be installed above a gas hob , the minimum distance between the hob and extractor must exceed 700mm (750mm is recommended).
9 Installation The extractor is mounted to the wall using 6 plugs and xing screws, see gur e 6. 1. Mark the wall with the positions of the xing holes at the required height. The height of the hood holes should take into account the minimum height specied in the instructions.
10.
11 Attribute Symbol Units Model Identification evp61/91 evp101/121 Annual Energy Consumption AEC Hood 105.1 122.3 kWh Time increase factor f 1.4 1.4 Fluid Dynamic Efficiency FDE Hood 16.1 (D) 17.6 (D) Energy Efficiency Index EEI Hood 89.2 (D) 87.4 (D) Measured airflow at Best Efficiency Point Q BEP 347.
12 Customer Care Department • The Group Ltd. • Harb y Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www.cda.eu Passionate about style T o contact our Customer Car e Depar tment, or for Service, please contact us on the details below .
An important point after buying a device CDA EVP61 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA EVP61 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA EVP61 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA EVP61 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA EVP61 will certainly help you make a decision on the purchase.
If you already are a holder of CDA EVP61, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA EVP61.
However, one of the most important roles played by the user manual is to help in solving problems with CDA EVP61. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA EVP61 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
