Instruction/ maintenance manual of the product PX330ES1A Casio
Go to page of 72
PX330ES1A ES USER’S GUIDE GUÍA DEL USUARIO Please keep all information for future reference. Guarde toda documentación para futuras consultas. Safety Precautions Bef ore tr ying to use the piano , be sure to read the separate “Saf ety Precautions”.
T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL. Impor tant! Please note the follo wing impor tant information before using this product. • Before using the AD-A12150L W Adaptor to power the product, be sure to chec k the AC Adaptor f or any damage first.
E-1 English Contents General Guide ......... .................. E-2 Installing the Music Stand ....... .............. ................. ..... E-3 Saving Settings and Using Panel Lock .... ................... E-4 Returning the Digital Piano to Its Factory Default Settings .
E-2 General Guide 2 1 do 3 4 5 6 bm bn bo bp 7 bk 8 9 bl ck cl cm cn co cp cq cr dm br bs cs ct dk dl dn bt bq ∗ dp ds dq dr dt ek el em en Bottom Left Side Back.
General Guide E-3 English • This manual uses the number s and names below to refer to buttons an d controllers. Insert the bottom of the music stand into the groove on the top of the Digital Piano’s console.
E-4 General Guide Your Digital Piano lets you save it s current settings, and lock its buttons to protect against operation errors. For details, see “Setting Backup” (page E-43) and “Panel Lock” (page E-43) .
E-5 English Power Outlet Your Digital Piano runs on standard househ old power. Be sure to turn off power whenever you are not using the Digital Piano. Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digita l Piano.
E-6 Connections IMPORT ANT! • Before conne cting headphon es, be sure to use the Digital Pian o’s VOLUME controller to turn the volume down to a low leve l.
English Connections E-7 Pedal Connector You can connect the optional ly availabl e 3-Pedal Unit (SP-32) to the pedal connector on the bottom of the Digital Piano. You can then use the pedals for expression that is similar to that available on an acoustic piano.
E-8 Connections Playing Output from External Equipment through the Piano’s Speakers Use commercially availa ble cables to connect the external audio equipment to the piano’s LINE IN jacks as shown in Figure .
E-9 English Using Built-in Tones 1. Press the ( POWER ) button. This turns on power. • To turn off the Digital Piano, press the button again. 2. After a short while, the display screen sho uld appear as shown below, which indicates that the Digital Piano is ready to be played.
E-10 Using Built-in Tones 3. Use the to (tone g roups) buttons to select the group you want. Example: To select the ORGAN group 4. Use the ( w , q ) buttons to select the tone you want. Example: To select “002 Jazz Organ” NO TE • Pressing q and w at the same time will jump to tone 001 of the currently selected group.
English Using Bu ilt-in To nes E-11 You can split the keyboard so the left side (lower range) plays one tone and the right side (upper range) plays a different tone. Example: To split the keyboard between the GM SLAP BASS 1 tone on the left (lower range) and the GRAND PIANO t one on th e right (upper range).
E-12 Using Built-in Tones After you split the keyboard (page E-11) , you may find out that the lower range notes on the left are too low or that the upper range notes on the right are too high. You can use octave shift to shift the octaves of the upper range and lower range upwar ds or downwards in octave units.
English Using Bu ilt-in To nes E-13 1. Press the ( REVERB ) button to toggle reverb on and off. Selecting the Reverb Type You can select from among the following four types of reverb. 1: Room 2: Hall 3: Large Hal l 4: Stadium 1. Hold down the ( REVERB ) button until the reverb type selection s creen shown below appears on the display.
E-14 Using Built-in Tones 1. Press the ( METRONOME ) button. This will start the metronome. 2. Press the ( METRONOME ) button again to stop the metronome. Changing the Beats Per Measure You can specify from two to six beats per measure for the metronome.
English Using Bu ilt-in To nes E-15 Adjusting the Metronome Volume You can use the following procedure to adjust the volume level of the metronome, without affecting the volume of Digital Piano output. 1. While holding down the ( FUNCTION ) button, press the ( METRONOM E ) button.
E-16 Using Built-in Tones Configuring the Digital Piano for Duet Play 1. Press the ( USER SONGS ) button so its lower lamp is lit. • To practice with songs s tored on a memory card, press the ( CARD/INTERNAL ) button so its lamp is lit in place o f the ( USER SONGS ) button.
E-17 English Using Auto Accompaniment With Auto Accompaniment, simply select the accompaniment rhythm you want and the matching accompaniment (drums, gu itar, etc.) will play automatically when you play a chord with you r left hand. It’s like having your own personal backup group along with you wherever you go.
E-18 Using Auto Accompaniment 6. Press the ( ACCOMP ON/OFF ) button so its lamp is lit. This turns ACCOMP on, so all accompaniment parts sound. • Turning ACCOMP off so th e ACCOMP lamp is unlit causes only the percussion instrument parts to sound.
English Using Auto Accompaniment E-19 Selecting a Chor d Fingering Mode You can select from among the following five chord fingering modes. 1: Fingered 1 2: Fingered 2 3: Fingered 3 4: CASIO Chord 5: Full Range 1. Hold down the ( ACCOMP ON/OFF ) button until the chord type selection screen appears on the display.
E-20 Using Auto Accompaniment Modifying Auto Ac companiment Patterns There are s ix different Auto Accompani ment patterns , shown below. You can switch between patterns during accompaniment play and even modify patterns. Use buttons through to select the pattern you want.
English Using Auto Accompaniment E-21 3. Use the ( w , q ) buttons to select the Auto Harmonize type you want. 4. Press the ( TONE ) button. This will exit the auto harmonize screen. 5. While playing chords, play the melo dy on the keyboard.
E-22 Using Auto Accompaniment 4. Use the instrument part buttons ( through ) to select the part (drums, bass etc.) you want to edit. The name of the part you sele ct will appear on the display. Rhythm patterns are ma de up of the eight parts shown below.
English Using Auto Accompaniment E-23 6. Repeat steps 3 through 5 to edit all of the accompaniment patterns and parts you want. 7. After editing is complete, adjust the tempo of the rhythm as desired. • The tempo you set here becomes the initial de fault tempo of the rhythm.
E-24 Playing Demo Songs Your Digital Piano comes with eight built-in demo tunes, which demonstrate the characteristics of each of the eight tone groups. 1. While holding down the ( PART ) button, press the ( PLAY/STOP ) button. This will start sequential pl ayback of the demo songs, starting from song 1.
English Playing Demo Songs E-25 You can import song data from an SD memory card or computer as a user song, and use it for Auto Accompaniment or for practice.
E-26 Playing Demo Songs Adjusting the Song Volume You can use the following procedure to adjust the volume level of the song’s Au to Accompaniment, without affecting the volume of keyboard tone output. For details, see “Song Vol ume” (page E-41) .
E-27 English Music Presets Music Presets provide you with one-touch tone , rhythm, chord, and other settings that are optimized for specific musical genres and songs. In addition to built-in pres ets, you can create your own original Music Pres ets (use r presets).
E-28 Music Presets A Music Preset editor is prov ided to allow you to create your own original Music Pres ets (user presets). Up to 50 user presets can be stored in Music Preset Group D. 1. Select the Music Preset you want to edit in order to create your user preset.
English Music Presets E-29 8. Enter a name for the p reset. Use the ( u ) and ( i ) buttons to move the cursor to the character you want to change and then use the ( w , q ) buttons to change the character. The following shows a table of available characters.
E-30 Music Presets 2. Use the ( REW ) and ( FF ) buttons to move the cursor (2) on the chord progression editing screen to the step you want to select. 3. Change the content o f the selected step as desired . 4. Repeat the above steps to edit a ll of the steps you want.
Music Presets E-31 English ■ To edit Auto Accompaniment param eters 1. On the editing operation selection screen (p age E-28), select “Parameter” and then press the ( ENTER ) button to display the Auto Accompaniment parameter editing scre en shown below.
E-32 Registering Tone and Rhythm Setups Registra tions let you save Digital Piano s etups (tone, rhythm, tempo, etc.) and for quick and easy recall when you need them. Registrations are stored usin g eight banks of 12 areas each as shown in the illustra tion below, for a total of 96 setups.
English Registering Tone and Rhythm Setups E-33 1. Configure the Digital Piano with the tone, rhythm, and other settings you wa nt to save. 2. While holding down the ( STORE ) bu tton, use the ( w , q ) buttons to select the bank where you want to save the registration.
E-34 Recording Your Keyboard Play You can record your music as you play and store up to five songs in Digital Piano memor y for later play back. You can divide a song into pa rts (by instrument, by left hand and right hand, etc.) and record each part separately.
English Recording Your Keyboard Play E-35 IMPORT ANT! • A new recording replaces (deletes) previously recorded contents. • If power to the Digital Piano is cut off while recording is in progress, ev erything you record ed up to that point will be deleted.
E-36 Recording Your Keyboard Play ■ Supported Track Data The following describes the data that can be recorde d to each type of track. System Track, Track s 01 through 16 Keyboard notes, keyboard to.
English Recording Your Keyboard Play E-37 You can use the procedures below to delete an entire recorder song or to delete a specific track of a recorder song. Deleting a Recorder Song 1. Use the ( RECORDER ) button to cycle through the recorder mod es until the RECORDER lamp is lit (playback mode).
E-38 Recording Your Keyboard Play 5. To stop punch-in recording, press the ( START/STO P ) button again. Anything in the track following the point where you pressed the ( START/STOP ) button will be retained as-is.
English Recording Your Keyboard Play E-39 ■ Performing Punch-in Re cording for Areas Smaller than One Measure Use the procedure below to specify a punch-in recording area that includes a part of a measure. Example: To re-record from beat 3 o f measure 2 up to beat 1 of measure 4 1.
E-40 Other Settings You can use the settings in this section to adjust the tuning and touch of the ke yboard, to configure pedal and MIDI settings, and to configure other parameters in order to tailor Digital Piano operation to your particular needs. 1.
Other Settings E-41 English No. Parameter Display Name Description Settings Shortcut Button * 1 Keyboard Key (Transpo se) Transpose Ad justs keyboard tuning by semitone units. –12 to 00 to 12 semitones 2 Keyboar d Fine Tu ning (Tuning) Tune Adjusts keyboard tuning by cent (1 semitone = 100 cents) units.
E-42 Other Settings 6 Song Playback/Card Group Play/CARD 6-1 Pre-count PreCount Turn on this setting for an audible count before starting playback of a user song or a s ong on a memory card. Off, On – 6-2 Song Repeat SongRepeat Turn on this setting to repeat play a user song or a s ong on a memory card.
Other Settings E-43 English No. Parameter Display Name Description Settings Shortcut Button * 8 Other Pa rameters Gro up General 8-1 Display Contrast Contrast Adjusts the contrast of the Digital Piano’s display. 00 to 16 – 8-2 Soft/Sostenuto Peda l Jack Setting Ped.
E-44 Using a Memory Card You can use the procedures in this section to transfer edited Auto Accompaniment data, recorder data, and other data from the Digital Piano to a commercially available SD memory card for storage.
English Using a Memory Card E-45 IMPORT ANT! • A memory card must be p ositioned correctl y when being loaded into the Dig ital Piano. Trying to force an improperly oriented memory car d into the slot can damage th e memory card and th e slot.
E-46 Using a Memory Card Use the following procedure to save Digital Piano data to a memory card. • Recorder songs can be saved as a standard MIDI fi le (SMF format 0). • User songs (downloaded songs, etc.) cannot be saved to a memory card. 1. Insert a memory card into the Dig ital Piano’s memory card slot.
English Using a Memory Card E-47 You can use the procedure below to load data fr om a memory card into Digital Piano memory. IMPORT ANT! • Make sure that all of the data you wan t to load is in the MUSICDAT folder on the me mory card.
E-48 Using a Memory Card Use the following procedur e to change the file name of a file on a memory card. 1. Insert the memory ca rd into the Digital Piano’s memory card slot. 2. While holding down the ( FUNCTION ) button, press the ( CARD/INTERNAL ) button.
English Using a Memory Card E-49 Playing Back All of the Songs in a Folder Use the procedure below to sele ct one of the four folders on a memory card and play back all of the songs in the folder i n succession. 1. While holding down the ( PART ) button, press the ( PLAY/STOP ) button.
E-50 Using a Memory Card One of the error messages be low appears on the display when a problem occurs. • All mentions of “memory card” in the following table refer to an SD memory card.
E-51 English Connecting to a Computer You can connect the Digital Piano to a computer and exchange MIDI data between them. You can se nd play data from the Digital Piano to music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback.
E-52 Connecting to a Co mputer NO TE • Once you are able to connect successfully, there is no problem with leaving the U SB cable connected when you turn off your computer and/or Digital Piano. • This Digital Piano conforms to General MIDI Level 1 (GM).
English Connecting to a Computer E-53 3. While holding down the ( FUNCTION ) button, press the ( USB DEVICE MODE ) button. This will enter the storage mode, which enables data transfer with the connected computer. The ( FUNCTION ) button lamp will flash and the display will appear as s hown below.
E-54 Connecting to a Co mputer 7. File name extensions (.MID, .CM2, etc.) are not displayed under initial default Windows settings. Perform the procedure below to turn on display of file name extensions. 8. After opening a data folde r, perform either of the following operations to tr ansfer data.
English Connecting to a Computer E-55 Playing Back User S ong Data by Copying It to the PIANO Drive You can use the procedure below at any time to copy user song data to the PIANO drive (without putting it in the MUSICLIB folder) for si mplified playback on the Digital Piano.
E-56 Reference Troubleshooting Problem Cause Action See Page No sound is produced whe n I press a keyboard key. 1. The VOLUME controller is set to “MIN”. 1. Ro tate the VOLUME controller more towards “MAX”. E-9 2. Headphones or an adapto r plug is plugged into one of the PHONES jacks.
Reference E-57 English * Based on 1KB = 1024bytes, 1MB = 1024 2 bytes • Specifications and designs are su bject to change without notice. Product Specifications Model PX-330BK Keyboard 88-key piano .
E-58 Reference Be sure to read and observe the following operating precautio ns. ■ Location Avoid the following locations for this product. • Areas exposed to direct su nlight and high humidity .
Reference E-59 English A C Adaptor Ha ndling Precautions Model: AD-A121 50LW 1. Read these instruction s. 2. Keep these instructio ns on hand. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water. 6. Clean only with a dry cloth.
A-1 Appendix/Apéndice Tone List/Lista de tonos Group Name/ Nombre del grupo Group Number/ Número de grupo Sequential Number/ Número secuencia l Tone Name/ Nombre del tono Program Change/ Cambio de .
Appendix/Apéndice A-2 NO TE • Acoustic resonance (page E-41) is applied only to tones indicated by “ O ”. • While sequential numbered tone 065 (STEEL STR.GUITAR 2) or 066 (STEEL STR.GUITAR 3) is selected, pressing multiple keys on the far left side of the keyboard will produce a guitar strumming sound.
A-3 Appendix/Apéndice Drum Assignment List/Lista de sonidos de batería E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 2 8 29 31 33 35 .
Appendix/Apéndice A-4 Rhythm List/Lista de ritmos Group Name / Nombre del grupo Group Number/ Número de grupo Sequential Number/ Número secuencial Rhythm name/ Nombre del ritmo POPS/JAZZ POPS 001 0.
A-5 Appendix/Apéndice NO TE • Sequential number rhythms 171 through 180 do not sound unless a chord is being played. • Los ritmos secuenciales números 171 al 180 no suenan a menos que se ejecute un acorde.
Appendix/Apéndice A-6 Music Preset List/Lista de preajustes musicales Group Name/ Nombre del grupo Group Number/ Número de grupo Sequential Number/ Número secuencial Preset Name/ Nombre de preajust.
A-7 Appendix/Apéndice 30 150 Nutcracker 31 151 Liebestraume 32 152 Gymnop edies 33 153 Jupiter 34 154 Entertaine r 35 155 MapleLeafRag TRAD 36 156 Michael Row 37 157 GrndpasClo ck 38 158 Troika 39 15.
Appendix/Apéndice A-8 Fingered 1, Fingered 2 Chords/ Acordes Fingered 1, Fingered 2 Fingered 3, Ful l Range Chords/ Acordes Fingered 3, Full Range In addition to the chords that can be fingered with Fingered 1 and Fingered 2, the following chords also are recognized.
A-9 Appendix/Apéndice Chord Example List/Lista de ejemplos de acordes Root Chord Type M m dim aug sus4 sus2 7 m7 M7 m7 b 5 7 b 5 7sus4 add9 madd9 mM7 dim7 69 6 m6 ( A # ) /B b B F # / ( G b ) G ( G # ) /A b A F CC # / ( D b ) D ( D # ) /E b E • Since the chord input range is limited, this model may not support some of the chords shown above.
Function T ransmitted Recognized Remarks Basic Channel 1 - 16 1 - 16 1 - 16 1 - 16 Def ault Changed Note Number 0 - 127 0 - 127 0 - 127 * 1 T rue voice Program Change OO 0 - 127 :T rue # After To u c .
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.
An important point after buying a device Casio PX330ES1A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio PX330ES1A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio PX330ES1A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio PX330ES1A you will learn all the available features of the product, as well as information on its operation. The information that you get Casio PX330ES1A will certainly help you make a decision on the purchase.
If you already are a holder of Casio PX330ES1A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio PX330ES1A.
However, one of the most important roles played by the user manual is to help in solving problems with Casio PX330ES1A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio PX330ES1A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
