Instruction/ maintenance manual of the product KL-750 Casio
Go to page of 19
KL-750 Owner ’ s Manual.
E-1 Introduction Congratulations on your selection of the CASIO KL-750 Label Printer . This CASIO Label Printer makes it possible for you to print adhesive labels for a wide variety of applications, such as: name tags, cassette tape labels, floppy disks, binders, and other applications.
E-2 Part 1 Getting Acquainted This part of the manual provides you with important information you need to know in order to use the Label Printer to its full potential.
E-3 Battery compartment T ape outlet T ape cutter lever General Guide Front Back/Left Side Optional AC Adaptor connector T ape cutter lever Power Keys Turn power on and of f. Liquid crystal display (LCD) Function key Letter keys 12 T ape Cutter Operation Precaution Note the following important precautions when operating the tape cutter lever.
E-4 Label Printer Menus Label Printer operation is designed to be as simple as possible, thanks to on- screen menus that you can use to select the settings you need. Each menu is described in detail in the sections that follow in this manual, but note the follow- ing general points when using them.
E-5 To replace the batteries 1. Turn power of f. • If you are using the optional AC adaptor for power , you should also unplug it from the Label Printer . 2. Open the battery compartment cover on the back of the Label Printer by sliding it in the di- rection indicated by the arrow .
E-6 Important! • Never try to push the tape back into the cassette. Once tape is out of the cassette, there is no way to wind it back in. T rying to do so can cause opera- tional problems with the Label Printer . To load a tape cartridge 1. Make sure that the Label Printer is turned off.
E-7 Part 3 Inputting Characters and Symbols This part of the manual tells you how to input characters. T o make things easier to understand, we call everything you input a character, regardless of whether it is actually a letter , number, or symbol. Explanations here all use the default settings that are in effect from the initial power-on screen.
E-8 • Manual feed indicator This indicator appears when you are using manual feed instead of auto feed. Auto feed is in effect when this indicator is not on the display . Important! • After you finish printing when using manual feed, be sure to always press FUNCTION and then PRINT (FEED) to feed the tape before cutting it.
E-9 2. Use the H and J cursor keys to move the underlining to the symbol you want. • Not all of the available symbols fit on the display . The menu will scroll when you press the cursor keys. • In this example, underline #. 3. After you underline the symbol you want, press SET .
E-10 Important! • Any character size specification you make is applied to all the characters on the display . Y ou cannot make multiple specifications for specific characters. • The Label Printer automatically adjusts the character size whenever you in- put a ¥ symbol to create a 2-line label as shown below .
E-11 T ext Effects There are three text effects that you can assign: shading, underlining, and boxed text. The following shows examples of each. Shading: Underlining: Boxed T ext: T ext effect changes are applied to printed text only .
E-12 Mirror Image Printing When you specify mirror image for text, it is printed in reverse image. Use mir- ror image when you plan to print on transparent tape, with the printing on the inside. When viewed through the transparent tape, the text will appear normal.
E-13 Part 7 Memory This part of the manual tells you how to store text data in memory for instant recall when you need it. Y ou can store two blocks of text in memory , each con- taining up of 63 characters, for a total of 126 characters. T o store data 1.
E-14 3. Press SET . • If all of the text does not fit on the display , you can use H and J to scroll it to the left and right. 4. Use K and L to select Area 1 or Area 2 then press SET . 5. Press SET to delete the text from the area that is currently on the display .
E-15 • If there is a cartridge already in the Label Printer , remove it by grasping the cartridge on both sides with your thumb and forefinger , and lift straight up. 3. Use a thin, pointed object to lift the yellow cut- ter cartridge out of the Label Printer as shown in the illustration.
E-16 To initialize the Label Printer 1. Turn power of f. 2. While holding down the PRINT and ESC keys, press ON to turn power on. 3. Keeping PRINT and ESC held down, release the ON key only . • This prompt confirms whether or not you want to initialize the Label Printer .
E-17 Specifications Model: KL-750 Input Keyboard Layout: T ypewriter (QWERTY) Character Types Alpha (English and other languages): 99 Numbers: 10 Symbols: 37 Display Type: Liquid crystal display Columns: 4 Character matrix: 5 × 7-dot Printing Type: Thermal transfer Speed: Approximately 6.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan.
An important point after buying a device Casio KL-750 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio KL-750 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio KL-750 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio KL-750 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio KL-750 will certainly help you make a decision on the purchase.
If you already are a holder of Casio KL-750, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio KL-750.
However, one of the most important roles played by the user manual is to help in solving problems with Casio KL-750. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio KL-750 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
