Instruction/ maintenance manual of the product Ceramic glass hob AEG
Go to page of 32
1 6310 K-m G B 949600459 INSTRUCTION BOOK Ceramic glass hob GB.
2 Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new hob efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference.
3 Contents P a g e n o F or the user Y our new appliance ...................................................................................... 2 Safety information ......................................................................................
4 Safety information These warnings are pro vided in the interests of your safety . Ensure you fully understand them before installing or using the appliance. Y our safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance.
5 Description of the pr oduct Control knobs CHEC Contr ol panel Control knobs for operations.
6 Ceramic glass surface The ceramic glass surface has four cooking zones. When a zone is turned on, it will illuminate at various intervals depending on the heat setting selected. Even at the highest setting the zone is disconnected occasionally to ensure that the surface is not over-heated.
7 Connection of child safety de vice on zones T urn the 2 control b uttons to at the same time. The display will sho w: When you turn on a zone the display will sho w: T o turn on a zone, turn the 2 control b uttons to at the same time. Y ou must then acti v ate one of the zones within 10 seconds.
8 Protection of the glass ceramic surface A protective film should be applied to the glass ceramic surface before use. This will make it easier to clean the surface, as well as preventing substances from being burnt onto the surface. This is what to do: 1.
9 Switch symbols (to the left) control for regulating the small cooking zone at the rear control for regulating the double cooking zone at the front. control for regulating the lar ge cooking zone at the rear control for regulating the small cooking zone at the front.
10 Residual-Heat indicator When you switch of f a zone, an "H" in the display indicates that the zone is still hot. The residual heat indicator will continue to be illuminated as long as the temperature exceeds 80 ˚ C. Cooking zones The control knobs are continuously adjustable from 1 to 9 (9 is the highest setting).
11 CHEC contr ol A utostop If you for get to turn a cooking zone of f after use, it will be disconnected automatically after a specif ic period of time.
12 The use of AUTOMAX means that the maximum power is connected for a specific number of minutes, depending on the setting chosen. The table below shows the length of time for which there is full power for each setting, and the functions for which each setting is suitable.
13 Disconnection of A UTOMAX: If you do not wish to use A UTOMAX, observe the follo wing procedure: 1. T urn the control button to A OFF . 2. Then turn the control button to the required setting. Setting the lar ge zone on the double zones 1. T urn the control button to The display will sho w: 2.
14 When you turn on a zone the display will sho w: Observe the follo wing procedure to use a zone: 1. T urn the 2 buttons to at the same time. 2. Use one of the zones within 10 seconds. The light under the symbol in the display will disappear . Y ou can disconnect the child safety de vice permanently as follo ws: 1.
15 Advice and hints for using the cooking zones If you use the advice below you will save energy and make your cleaning tasks easier. Adjust the cooking zones correctly. Select the highest setting for the cooking zones until the food is brought to the boil.
16 Do not slide saucepans across the surface of the hob - al ways lift the pan when placing it on, or removing it from the ceramic surface. W ipe the bottom surface of the pots and pans with a clean dry cloth before placing them on the ceramic surface.
17 Cleaning and maintenance For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface.
18 Stainless steel surfaces Clean the appliance after use with a soft cloth well wrung out in warm water, use a small amount of liquid detergent for stubborn soiling. Stainless steel parts may become straw coloured with use, use a proprietary stainless steel cleaner to remove this straw discolouration.
19 The decorati ve pattern on the ceramic surface can become scratched and marred with use, depending upon maintenance, b ut does not adversely af fect performance. Such blemishes ar e not cover ed by the warranty and do not affect the operation of the hob .
20 Minimum distance to side wall: 150 mm Minimum distance to rear wall (non- flammable material): 50 mm Reinforcement beams Installation Caution: In order to a void a hazard this appliance must be ins.
21 It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges.
22 The electrical connection may only be performed by a qualif ied electrician/ competent person. The electrical connection must be carried out in accordance with pre v ailing regulations for appliances using hea vy current. The connection must comply with any specif ic requirements specified by the local electricity supply authority .
23 Cell V oltage 240 V Electrical connection 240V - 50Hz T otal wattage 6400W Instant heat ef fect Left front 12/18 cm 700/1700 W Left Back 14 cm 1200 W Right back 21 cm 2300 W Right front 14 cm 1200 W This unit is labelled to indicate conformity with the lo wv oltage directi ve (73/23/EEC) and the EMC directi ve (89/336/EEC).
24 Something not w orking If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee.
25 Problems Zones will not come on, Child safety device has been activated. Zones will not come on, Autostop has been activated. Solution Turn the 2 display shows control buttons with symbol for child safety device to simultaneously. Then activate one of the zones within 10 seconds.
26 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area.
27 AEG of fer the follo wing guarantee to the f irst purchaser of this appliance: 1. The guarantee is v alid for 12 months commencing when the appliance is handed ov er to the first retail purchaser , which must be verif ied by purchase in v oice or similar documentation.
28 Before you mov e please contact your nearest Customer Care centre, listed belo w , to gi ve them details of your ne w home. They will then ensure that the local service or ganisation is aw are of your mov e and able to look after you and your appliances.
29.
30.
31.
32 325 88-1710 Rev . 3-018.
An important point after buying a device AEG Ceramic glass hob (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG Ceramic glass hob yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG Ceramic glass hob - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG Ceramic glass hob you will learn all the available features of the product, as well as information on its operation. The information that you get AEG Ceramic glass hob will certainly help you make a decision on the purchase.
If you already are a holder of AEG Ceramic glass hob, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG Ceramic glass hob.
However, one of the most important roles played by the user manual is to help in solving problems with AEG Ceramic glass hob. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG Ceramic glass hob along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
