Instruction/ maintenance manual of the product 3258 Casio
Go to page of 15
Operation Guide 3258 MO1106-EA E-1 ENGLISH Congratulations upon your selection of this CASIO watch. Applications The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude. Measured values are then shown on the display.
Operation Guide 3258 E-8 E-91 Using the Countdown Timer E-91 To enter the Countdown Timer Mode E-93 To confi gure countdown timer settings E-94 To use the countdown timer E-94 To turn the progress be.
Operation Guide 3258 E-16 • Even when the watch is within range of a transmitter, signal reception may be impossible due to the effects of geographic contours, structures, weather, the time of year, the time of day, radio interference, etc.
Operation Guide 3258 E-24 Selecting a Mode • The illustration below shows which buttons you need to press to navigate between modes. • To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.
Operation Guide 3258 E-32 2. Press D to move the fl ashing in the sequence shown below to select the other settings. Thermometer/Barometer/ Altitude unit Power Saving Illumination Duration Button Ope.
Operation Guide 3258 E-40 Using Bearing Memory Bearing Memory lets you temporarily store and display a direction reading so you can use it as a reference as you take subsequent digital compass readings. The Bearing Memory screen displays the direction angle for the stored reading, along with an indicator that indicates the stored reading.
Operation Guide 3258 E-48 Barometric Pressure • Barometric pressure is displayed in units of 1 hPa (or 0.05 inHg). • The displayed barometric pressure value changes to - - - if a measured barometric pressure falls outside the range of 260 hPa to 1,100 hPa (7.
Operation Guide 3258 E-56 To take an altimeter reading 1. Make sure the watch is in the Timekeeping Mode or any one of the sensor modes. • The s ens or m ode s are: D igit al Co mp ass M od e, Ba rom eter/ The rm om eter M od e, and A lti mete r Mo de.
Operation Guide 3258 E-64 How Total Ascent/Descent Values Are Updated Session start point 20 m 0 m 120 m 320 m 620 m Session end point The total ascent and total descent values produced by an Altimeter Mode measurement session during the example climb illustrated above are calculated as follows.
Operation Guide 3258 E-72 Precautions Concerning Simultaneous Measurement of Altitude and Temperature Though you can perform altitude and temperature measurements at the same time, you should remember that each of these measurements requires different conditions for best results.
Operation Guide 3258 E-80 Adjusting the High Tide Time Use the following procedure to adjust the high tide time within a particular date. You can fi nd out high tide information for your area from a tide table, the Internet, or your local newspaper. To adjust the high tide time 1.
Operation Guide 3258 E-88 To turn an alarm and the Hourly Time Signal on and off 1. In the Alarm Mode, use A and C to select an alarm or the Hourly Time Signal. 2. When the alarm or the Hourly Time Signal you want is selected, press B to turn it on and off.
Operation Guide 3258 E-96 To specify standard time or daylight saving time (DST) for a city 1. In the World Time Mode, use A (East) and C (West) to scroll through the available city codes. • Keep s croll ing u ntil t he ci ty c od e who se S ta nda rd Tim e/ D aylig ht Savi ng Ti me s et ting y ou wan t to cha nge is d ispl ayed.
Operation Guide 3258 E-104 ■ “ERR” appears on the display while I am using a sensor. Subjecting the watch to strong impact can cause sensor malfunction or improper contact of internal circuitry. When this happens, ERR (error) will appear on the display and sensor operations will be disabled.
L-1 Operation Guide 3258 E-112 Countdown Timer: Measuring unit: 1 second Countdown range: 60 minutes Setting ranges: Countdown start time (1 to 60 minutes, 1-minute increments); Reset time (1 to 5 min.
An important point after buying a device Casio 3258 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio 3258 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio 3258 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio 3258 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio 3258 will certainly help you make a decision on the purchase.
If you already are a holder of Casio 3258, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio 3258.
However, one of the most important roles played by the user manual is to help in solving problems with Casio 3258. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio 3258 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
