Instruction/ maintenance manual of the product 30 Cascade Audio Engineering
Go to page of 8
APS Power Supply 15, 30, 45, 55, 75, 90 and 100 Amp Installation Guide Congratulations and thank you for purchasing a Cascade Audio Engineer- ing APS Power Supply .
Protection All Cascade Audio Engineering APS Power Supplies feature temperature, overcurrent and reverse-polarity protection circuitry . They will provide st able regulated DC output voltage (13.6V or 14.2V , relative to jumper connection - The APS-100 is 13.
Y our new APS Power Supply can be used with or without an additional bat- tery . Use of a battery connected in parallel with your APS power supply will greatly increase the current available for transients. For installations where use of a battery is not possible, capacitors may be used.
Cut the positive and negative cables that will go from the power supply to the load (battery , display board, distribution blocks, etc.) to the desired length. Always use the proper sized cable based on the amperage of the power supply and the distance between the power supply and the load (Please refer to the chart at the end of this manual).
Connecting Multiple APS Power Supplies APS power supplies may be connected in parallel to increase their current capability . There are a few import ant step s to follow: 1. APS power supplies must only be connected to other APS units of the same model.
Fuses Y our APS Power Supply is protected against reverse polarity . If the battery or the APS unit is hooked up incorrectly , the fuse on the end p anel will blow and can easily be replaced. When replacing fuses, always use the same size AGC style fuses that came with your power supply .
12VDC Cable Calculator MI NI MUM w i r e gauge shown. For M AXI MUM PERFORMA N C E, use LA R G E R w i r e gauge. 3600 225 - 300 2700 150 - 225 1/ 0 GA 1800 125 - 150 1500 105 - 125 1260 85 - 10 5 102.
T wo Y ear W arranty Cascade Audio Engineering warrants its APS Power Supplies against any elec- tronic or mechanical defects under normal use for a period of two (2) years from the date of original purchase.
An important point after buying a device Cascade Audio Engineering 30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cascade Audio Engineering 30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cascade Audio Engineering 30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cascade Audio Engineering 30 you will learn all the available features of the product, as well as information on its operation. The information that you get Cascade Audio Engineering 30 will certainly help you make a decision on the purchase.
If you already are a holder of Cascade Audio Engineering 30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cascade Audio Engineering 30.
However, one of the most important roles played by the user manual is to help in solving problems with Cascade Audio Engineering 30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cascade Audio Engineering 30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
