Instruction/ maintenance manual of the product 1181281 Carson
Go to page of 12
INSTALLATION INSTRUCTIONS FOR 50 - 0212x - 002 SERIES 1181281 50 - 0212x - 014 SERIES 1181280 FORD EXPEDITION OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM These instructions are intended for use only by experienced professional s in the automotive customizing business.
2 ITEM DESCRIPTION QTY 1 Nut, 6 - 32 HH KEPS 8 2 Screw, # 6 x 3/8 PPH TAB 13 3 Screw, # 8 x 9/16 PWH TAB 2 4 Screw, 6 - 32 x 1/2 PPH 4 5 Screw, 6 - 32 x 3/4 PPH 10 6 Screw, # 8 x 1 1/4 PWH TAB 2 7 Screw, # 8 x 1 1/2 PWH TAB 1 8 Screw, # 8 x 1 3/4 POH TAB Z1 2 9 Washer, 3.
3.
4 I. REMOVAL OF O.E.M. EQUIPMENT. 1. Remove and retain OEM overhead console assembly by removing one (1) OEM screw in front pocket. Pull console down and disconnect wiring. Set aside in a safe place for later re - installation. 2. Remove and retain rear A/C control assembly.
5 3. Install block - off cover (item 16 pg 2) using one (1) # 8 x 1 1/4" PWH screw (it em 6 pg 2). See Fig. 4. (Use caution to assure screw does not penetrate vehicle roof ). 4. Detach wire harness from brace where A/C assembly was removed. Remove and retain two (2) OEM screws.
6 6. Install video system wiring into vehicle. Route video system cables from installed position in center of roof to “B” - pillar. Down “B” - pillar to floor. Route power and ground leads forward to fuse box area. Connect power wire to a fused accessory controlled power source per instructions provided in video system.
7 3. Attach four (4 ) pod mounting brackets (item 14 pg 2) to front and rear of be zel with four (4 ) 6 - 32 X 1/2" screws (item 4 pg 2) and four (4) 8 - 32 KEPS nuts (item 1 pg 2). See Figure 10. 4. Install and secure O.E. bezel in overhead console (item 19 pg 2) with eight ( 8 ) # 6 X 3/8" PPH screws (item 2 pg 2) As shown.
8 5. Remove two (2) plastic tabs on secondary light and pod assembly, replace two ( 2 ) OEM screws in front assembly as shown. See Figure 12. 6. Install and secure secondary light pod assembly in overhead console with six ( 6 ) OEM screws. See Figure13.
9 7. Remove A/C control from rear bezel assembly. Modify A/C co ntrol by drilling three (3) 1/8" dia. holes in front mounting tabs. Position rear A/C control head in center of overhead opening. Secure with five (5) # 6 X 3/8" PPH screws (item 2 pg 2).
10 1. Raise overhead console into approximate position and connect wiring to components. 2. Loosely fit console against headliner. Check that console is centered in vehicl e and matches all contours of headliner.
11 6. Release video screen from locked position. Lower video screen t o viewing position for access to mounting locations in top of video system housing. 7. Raise video system into approximate position and connect all wiring to components. Route video cable through hole in mounting bracket.
12 CUT ON DOTTED LINES.
An important point after buying a device Carson 1181281 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Carson 1181281 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Carson 1181281 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Carson 1181281 you will learn all the available features of the product, as well as information on its operation. The information that you get Carson 1181281 will certainly help you make a decision on the purchase.
If you already are a holder of Carson 1181281, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Carson 1181281.
However, one of the most important roles played by the user manual is to help in solving problems with Carson 1181281. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Carson 1181281 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
