Instruction/ maintenance manual of the product A62000GNW0 AEG
Go to page of 20
A62000GNW0 EN FREEZER USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 6 Control panel 9 First use 9D a i l y u s e 10 Helpful Hints and Tips 11 Care and cleaning 12 What to do if… 14 Technical data 14 Installation 18 Environmental concern.
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
• It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appli - ance if it is damaged. Report possible damages immediately to the place you bought it.
5 Temperature warmer button 6 Display It is possible to change predefined sound of buttons to a loudly one by press ing together Mode button and Temperature colder button fo r some seconds.
1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. The freezer temperature indicator shows symbol. 2. Press the OK button to confirm. The FROSTMATIC indicator is shown. An animation starts. This function stops automatically after 52 hours.
2. The Child Lock indicator flashes. 3. Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: 1. Press the Mode button until the Child Lock indicator flashes . 2. Press the OK button to confirm. 3. The Child Lock indicator goes off.
The maximum amount of food that can be frozen in 24 hours is specified on the rating plate , a label located on the inside of the appliance. The freezing process lasts 24 hours: during this period do not add other food to be frozen.
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter; • lean foods store better and longer than fatty ones ; salt reduces th.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little wa shing-up liquid added.
Problem Possible cause Solution The compresso r operates continually. The temperature is not set cor - rectly. Set a higher temperature. The door is not closed correctly. Refer to "Closing the door". The door has been opened too frequently. Do not keep the door open longer than necessary.
6. After approximately 20 minutes the drain hose at the rear of the cabinet starts to dis - charge water into the drip tray. 7. To prevent the water overflowing from the drip tray dry with a sponge. 8. The defrosting process ends when the water stops dripping.
units. Accurate levelling is ensured by one or mo re adjus table feet at the base of the cabi - net. If the cabinet is placed in a corner and the side with the hinges faci ng the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.
WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. 1 2 3 4 5 The wires in the mains lead are coloured in accordance with the.
WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that i t is disposed of safely. Rear spacers Inside the appliance you find two spacers which must be fitted as shown in the figure. Slacken the screws and insert the spa cer under the screw head, then retighten the screws.
2. Slide the door off the pin (G). Unscrew the pin (G) and install it on the opposite side. 3. Unscrew the pivot pin (Z) of the hi nge (E) and the rear screw (Y) with a spanner of 10 mm and remove the closing device (M).
for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative conseq uences for the environment and human health, which could otherwise be caused by inappropri ate waste handling of this product.
www.aeg-electrolux.com/shop 222355871-A-4520 10.
An important point after buying a device AEG A62000GNW0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG A62000GNW0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG A62000GNW0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG A62000GNW0 you will learn all the available features of the product, as well as information on its operation. The information that you get AEG A62000GNW0 will certainly help you make a decision on the purchase.
If you already are a holder of AEG A62000GNW0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG A62000GNW0.
However, one of the most important roles played by the user manual is to help in solving problems with AEG A62000GNW0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG A62000GNW0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
