Instruction/ maintenance manual of the product 88009 AEG
Go to page of 24
FAVORIT 88009 DISHWASHER USER MANUAL.
CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DE SCRIPTIO N 7 CONTR OL PANEL 8P R O G R A M M E S 10 OPTIONS 11 BEFORE FIRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLES HOOTING 20 TE CHNICAL INFOR MATION ENVIRONMENT CONCERNS Recycle the materials with the symbol .
FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it.
SAFETY INFORMATION Before the installatio n and use of th e appliance, carefully read the supplied instructions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Al- ways keep the instructions with the ap- pliance for future ref erence.
ble. Contact Service or an electrician to change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the in stalla- tion. Make sure that there is access to the mains plug after the installa- tion. • Do not pull the mains cable to dis- connect the appliance.
PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dis.
CONTROL PANEL 1 3 4 5 6 7 9 2 8 AB C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchpad Indicators Description Multitab indicator. ÖKO PLUS indicator.
PROGRAMMES Programme Type of soi l Type of load Programme phases Options 1) All Crockery, cutler y, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ExtraHygiene ÖKO PLUS 2) Heavy soil Crockery.
Consumption v alues Programme 1) Energy (kWh) Water (l) 0.9 - 1.7 8 - 15 1.4 - 1.6 13 - 14 1.1 - 1.2 9 - 11 0.8 9 0.9 - 1.0 9 - 11 1.0 - 1.1 10 - 11 1.
OPTIONS MULTITAB FUNCTION Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse a id and salt. The related indicators are off. The programme duration can increase. ÖKO PLUS This function decreases the tempera- ture in the drying phase.
BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees w ith the water hardness in your area. If not, adjust the water softener. Contact your lo- cal water authority t o know the wa- ter hardness in your area. 2. Fill the salt container.
Manual adjustment Turn the water hardness dial to t he po- sition 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3.
FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas h- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains.
DAILY USE 1. Open th e water tap . 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser.
USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only deterge nts for dish- washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner pa rt of the ap- pliance door.
• The display shows the pro- gramme duration tha t decreases with steps of 1 minute. Starting a programme with delay start 1. Set the programme and the op- tions. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours).
CARE AND CLEANING WARNING! Before maintenance, deactivate the ap- pliance and disconnect th e mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults . Make a check regularly and, if necessary, clean them.
TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the prob- lem (refer to the table). If not, contact Service. With some prob lems, the dis play shows an alarm code: • - The appliance does not fill with water.
THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possibl e solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled.
Problem Possible cause Possibl e solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient .
Capacity Place settings 12 1) Connect the water inlet hose to a w ater tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of e nergy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.
22.
ENGLISH 23.
www.aeg.com/shop 117928790-A-212011.
An important point after buying a device AEG 88009 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 88009 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 88009 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 88009 you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 88009 will certainly help you make a decision on the purchase.
If you already are a holder of AEG 88009, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 88009.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 88009. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 88009 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
