Instruction/ maintenance manual of the product WUX5000 Canon
Go to page of 74
© 201 1 CANON INC. YT1-1435-001 MUL TIMEDIA PROJECT OR WUX5000 / WUX4000 User Commands Revision 1.
WUX5000 / WUX4000 User Commands - - ii T able of Contents 1. Overview ................................................................................................................. 1 2. Communication S pecifications ................................
WUX5000 / WUX4000 User Commands - - iii FREEZE ........................................................................................................................ ............ 36 GAMMA .............................................................
WUX5000 / WUX4000 User Commands - 1 - 1. Overview These specifications describe the method s of controlling both the Projector WUX 5 000 and WUX4000 from the PC over an RS-232C connection or LAN. V irtually all operations possible with the re mote control can be controlled from the P C.
WUX5000 / WUX4000 User Commands - 2 - 2. Communication S pecifications Communication S pecifications The projector can be cont rolled via RS-232C or LAN connection.
WUX5000 / WUX4000 User Commands - 3 - Usable Character Codes Use ASCII codes in the red and blue areas. No distinction is made between double-byte char acters and single-byte charac ters. Do not use double-byte or triple-byte charac ters. They will all be recogniz ed as single-byte characters.
WUX5000 / WUX4000 User Commands - 4 - Communication System (Serial) Item S pecifications Communication system RS-232-C Start-stop synchronization Semi- duplex communication Transmission speed 19.
WUX5000 / WUX4000 User Commands - 5 - Commands T ransmissions sent from the PC to the projector . T ransmission format △ <Command character strings> △ <Delimiter> <Command character st rings> Character string s consisting of 0 or more alphanumeric characters.
WUX5000 / WUX4000 User Commands - 6 - Response T ransmissions sent from the Projector to th e PC in response to commands from the PC. T ransmission format <Response character string> <Delimiter> <Response character string > Character strings co nsisting of one or more ASCII characters.
WUX5000 / WUX4000 User Commands - 7 - Other T ransmission recognition On the receiving side (the Projector), the data that is able to be received within the character interval of T c is held, and the transmission is consid ered received when the delimiter is received.
WUX5000 / WUX4000 User Commands - 8 - 3. Communication Flow T ransmission sent At the PC, the transmission is se nt within character intervals of T c (character interval timeout).
WUX5000 / WUX4000 User Commands - 9 - 4. Command System.
WUX5000 / WUX4000 User Commands - 10 -.
WUX5000 / WUX4000 User Commands - 1 1 - 5. Command List Item Commands Description 1 6AXADJ 6-axis adjustment ON / OFF 2 6AXR-Y 6-axis correction R-Y hue / saturation settings 3 AMBADJ Ambient light co.
WUX5000 / WUX4000 User Commands - 12 - Item Commands Description 36 NR Noise reduction 37 POWER This controls the power supply 38 PRODCODE Product information inquiry 39 RC Remote control operation em.
WUX5000 / WUX4000 User Commands - 13 - 6. Details of Commands Descriptions of each comm and are prov ided starting from the next page. The command descriptions have the format s hown below . Alphabetic command name This briefly describes the command functi on.
WUX5000 / WUX4000 User Commands - 14 - 6AXADJ 6-axis adjustment ON / OFF Format 6AXADJ=<6-axis adjustment parameter : ID> GET □ 6AXADJ / ? △ 6AXADJ <6-axis adjustmen t parameter:ID> ON This sets the 6-axis adjustment to ON. OFF This sets the 6-axis adjustment to OFF .
WUX5000 / WUX4000 User Commands - 15 - 6AXR-Y 6-axis correction R-Y hu e / saturation settings Format 6AXR=<R hue:Number> ▽ <R saturation:Number> ▽ <R brightness:Number> 6AXG=<.
WUX5000 / WUX4000 User Commands - 16 - AMBADJ Ambient light correction adjustment ON / OFF Format AMBADJ=<Ambient light correction adjustment parameter:ID> GET □ AMBADJ / ? △ AMBADJ <Ambient light correction adj ustment parameter:ID> ON This sets the ambient light correction adjustment to ON.
WUX5000 / WUX4000 User Commands - 17 - AMBLEVEL Ambient light level settings Format AMBLEVEL=<Ambient light level settings parameter:ID> GET □ AMBLEVEL / ? △ AMBLEVEL <Ambient light level settings parameter:ID> WEAK This sets the ambient light level to WEAK.
WUX5000 / WUX4000 User Commands - 18 - AMBTYPE Ambient light type settings Format AMBTYPE=<Ambient light type settings parameter:ID> GET □ AMBTYPE / ? △ AMBTYPE <Ambient light type settings parameter: ID> TG This sets the ambient light type to T ungsten.
WUX5000 / WUX4000 User Commands - 19 - ASPECT Screen settings Format ASPECT=<Screen setting parameters:ID> GET □ ASPECT / ? △ ASPECT <Screen setting parameters:ID> AUTO Auto 4:3 4:3 16.
WUX5000 / WUX4000 User Commands - 20 - Example Setting > ASPECT=16:9 This sets the screen size to 16:9. < i:OK Reference > GET ASPECT or ?ASPECT This retrieves the screen size. < g:ASPECT=TRUE * Commands are indicated by ">", and responses are indicated by "<".
WUX5000 / WUX4000 User Commands - 21 - AUTOPC Auto PC Format AUTOPC △ Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X O X X X Response "i:OK" is returned if the control was executed properly . For details on other response s, refer to the "Error Lis t".
WUX5000 / WUX4000 User Commands - 22 - AUTOSETEXE Auto setup Format AUTOSETEXE □ <Auto set parameter:ID> <Auto set parameter:ID> INPUT Automatic signal sensing execution Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response i:OK” is returned when the automatic processing was completed successfully .
WUX5000 / WUX4000 User Commands - 23 - AV O L Audio volume adjustment Format AVOL=<Audio volume level:Number> GET □ AVOL / ? △ AVOL Setting values for <Audio volu me level:Number> are 0 to 20.
WUX5000 / WUX4000 User Commands - 24 - BLANK BLANK function Format BLANK=<BLANK parameter:ID> GET □ BLANK / ? △ BLANK <BLANK parameter:ID> ON BLANK ON OFF BLANK OFF Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 25 - BRI Brightness setting Format BRI=<Brightness setting:Number> GET □ BRI / ? △ BRI Setting values for <Brightness setting: Number> are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 26 - COLOR_TEMP Color temperature setting Format COLOR_TEMP=<Color temperature setting:Number> GET □ COLOR_TEMP / ? △ COLOR_TEMP Setting values for <Color temperat ure setting:Number> are -17 to 21.
WUX5000 / WUX4000 User Commands - 27 - COMVER User command version inquir y Format GET □ COMVER / ? △ COMVER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns the u.
WUX5000 / WUX4000 User Commands - 28 - CONT Contrast setting Format CONT=<Contrast setting:Number> GET □ CONT / ? △ CONT Setting values for <Contrast setting:Number > are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 29 - DGAMMA Dynamic gamma Format DGAMMA=<Dynamic gamma setting parameter:ID> GET □ DGAMMA / ? △ DGAMMA <Dynamic gamma setting parameter:ID> OFF Off WE.
WUX5000 / WUX4000 User Commands - 30 - DZOOM_POS DZOOM position setting Format DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number> GET □ DZOOM_POS / ? △ DZOOM_POS <DZOOM p osition X / Y :Number> is a signe d integer indica ting the central po sition of the en larged inpu t image.
WUX5000 / WUX4000 User Commands - 31 - DZOOM_RA T DZOOM ratio setting Format DZOOM_RAT=<DZOOM ratio parameter:ID> GET □ DZOOM_RAT / ? △ DZOOM_RAT <DZOOM ratio parameter:ID> 1 same size (DZOOM disabled) 1.
WUX5000 / WUX4000 User Commands - 32 - ERR Error information inquiry Format GET □ ERR / ? △ ERR Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns the current erro r information as 'g:ERR=<ErrorID:Character string>' For details on other response s, refer to the "Error Lis t".
WUX5000 / WUX4000 User Commands - 33 - FINE_GAMMA_R Fine gamma (R) adjustment Format FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment value:Number>, <Fine gamma (R) adjustment point.
WUX5000 / WUX4000 User Commands - 34 - FINE_GAMMA_G Fine gamma (G) adjustment Format FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment value:Number>, <Fine gamma (G) adjustment point.
WUX5000 / WUX4000 User Commands - 35 - FINE_GAMMA_B Fine gamma (B) adjustment Format FINE_GAMMA_B=<Fine gamma (B) adjustment point 1 adjustment value:Number>, <Fine gamma (B) adjustment point.
WUX5000 / WUX4000 User Commands - 36 - FREEZE Freeze status Format FREEZE=<FREEZE parameter:ID> GET □ FREEZE / ? △ FREEZE <FREEZE parameter:ID> ON Image now frozen OFF Image now not fr.
WUX5000 / WUX4000 User Commands - 37 - GAMMA Gamma adjustment Format GAMMA=<Gamma adjustment:Number> GET □ GAMMA / ? △ GAMMA Setting values for <Gamma adjustment: Number > are -10 to 10. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 38 - HDMI_IN HDMI input setting Format HDMI_IN=<HDMI input setting parameter:ID> GET □ HDMI_IN / ? △ HDMI_IN <HDMI input setting parameter:ID> AUTO Select this when connectin g to an A V equipment. Image processing and menu displays are adjusted r espective to the connected video equipment.
WUX5000 / WUX4000 User Commands - 39 - HDMI_OVSCAN HDMI overscan setting Format HDMI_OVSCAN=<HDMI overscan setting parameter:ID> GET □ HDMI_OVSCAN / ? △ HDMI_OVSCAN <HDMI overscan setting.
WUX5000 / WUX4000 User Commands - 40 - HUE Hue setting Format HUE=<Hue setting value:Number> GET □ HUE / ? △ HUE Setting values for <Hue setting value:Number> are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 41 - IMAGE Image mode setting Format IMAGE=<Image mode setting parameter:ID> GET □ IMAGE / ? △ IMAGE <Image mode setting parameter:ID> ST ANDARD Stand.
WUX5000 / WUX4000 User Commands - 42 - Setting Commands related to the settings 6-axis adjustment 6AXADJ 6-axis color correction 6AXR ∼ Y (5) The current image quality can be acquired using the applicable GET c ommand. (" GET IMAGE ") Example Setting > IMAGE=PRESENTATION This sets the image mode to "Presentation".
WUX5000 / WUX4000 User Commands - 43 - IMAGEFLIP Flip display Format IMAGEFLIP=<Image flip setting parameters:ID> GET □ IMAGEFLIP / ? △ IMAGEFLIP <Image flip setting parameters:ID> NON.
WUX5000 / WUX4000 User Commands - 44 - INPUT Input selection Format INPUT=<Input selection parameters:ID> GET □ INPUT / ? △ INPUT <Input selection parameters:ID> D-RGB Digital PC A-RGB.
WUX5000 / WUX4000 User Commands - 45 - LAMP Lamp output setting Format LAMP=<Lamp output setting parameters:ID> GET □ LAMP / ? △ LAMP <Lamp output setting parameters:ID> NORMAL Normal .
WUX5000 / WUX4000 User Commands - 46 - LAMPCOUNTER Lamp ON time inquiry Format GET □ LAMPCOUNTER / ? △ LAMPCOUNTER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns.
WUX5000 / WUX4000 User Commands - 47 - MAIN Front panel operation emulation Format MAIN □ <Main unit panel emulation button parameters:ID> <Main unit panel emulation button para meters:ID&g.
WUX5000 / WUX4000 User Commands - 48 - MEMCADJ Memory color adjustment Format MEMCADJ=<Memory color adjustment parameter:ID> GET □ MEMCADJ / ? △ MEMCADJ <Memory color adjustment parameter.
WUX5000 / WUX4000 User Commands - 49 - MODE Control mode switch Format REMOTE LOCAL GET □ MODE / ? △ MODE Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response "i:OK" is always returned with the cont rol mode switch setting.
WUX5000 / WUX4000 User Commands - 50 - MUTE Mute control Format MUTE=<Mute control parameter: ID> GET □ MUTE / ? △ MUTE <Mute control para meter: ID> ON This prohibits the audio / beep sound.
WUX5000 / WUX4000 User Commands - 51 - NR Noise reduction Format NR=<Noise reduction setting parameter:ID> GET □ NR / ? △ NR <Noise reduction setting pa rameter:ID> OFF Off WEAK W eak .
WUX5000 / WUX4000 User Commands - 52 - POWER This controls the power supply Format POWER □ <Parameter:ID> GET □ POWER / ? △ POWER <Parameter:ID> ON Power ON OFF Power OFF Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 53 - PRODCODE Product information inquiry Format GET □ PRODCODE / ? △ PRODCODE Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Product name is returned as g:PRODCODE="<Product name:Character string>" For details on other response s, refer to the "Error Lis t".
WUX5000 / WUX4000 User Commands - 54 - RC Remote control operation emu late Format RC □ <Remote control emulation button parameters:ID> <Remote control emulatio n button parameters:ID> P.
WUX5000 / WUX4000 User Commands - 55 - Response "i:OK" is returned when the button press re quest has been acknowledged successfully . (It does not indicate if the operation for the pressed button was executed properly .) Description (1) This emulates pressing of the remote control buttons for controlling the projector .
WUX5000 / WUX4000 User Commands - 56 - RGBGAIN RGB gain adjustment Format RGBGAIN=<R gain setting:Number> ▽ <G gain setting:Number> ▽ <B gain setting:Number> GET □ RGBGAIN / ? △ RGBGAIN Setting values for <R/G/B gain setting:Number> are -60 to 60.
WUX5000 / WUX4000 User Commands - 57 - RGBOFFSET RGB offset adjustment Format RGBOFFSET=<R offset setting:Number> ▽ <G offset setting:Number> ▽ <B offset setting:Number> GET □ RGBOFFSET / ? △ RGBOFFSET Setting values for <R/G/B offset setting:Number > are -60 to 60.
WUX5000 / WUX4000 User Commands - 58 - ROMVER ROM version inquiry Format GET □ ROMVER / ? △ ROMVER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response ROM version of the firmwa re is returned as g:ROMVER="<ROM version:Character string>" For details on other response s, refer to the "Error Lis t".
WUX5000 / WUX4000 User Commands - 59 - SA T Color saturati on setting Format RGBGAIN=<R gain setting:Number> ▽ <G gain setting:Number> ▽ <B gain setting:Number> GET □ RGBGAIN / ? △ RGBGAIN Setting values for <Color saturation setting value:Number> are -20 to 20.
WUX5000 / WUX4000 User Commands - 60 - SA VEIMGPROF Create, save, delete user memory / Create user memory s tatus Format SAVEIMGPROF=<User memory save to parameter:ID> <User memory save to pa.
WUX5000 / WUX4000 User Commands - 61 - SCRNASPECT Screen aspect setting Format SCRNASPECT=<Screen aspect setting parameter:ID> GET □ SCRNASPECT / ? △ SCRNASPECT <Screen aspect setting par.
WUX5000 / WUX4000 User Commands - 62 - SEL Input signal selection Format SEL=<Input signal selection parameter:ID> GET □ SEL / ? △ SEL <Input signal selection parameter:ID> AUTO Auto Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X X O X X Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 63 - SHARP Sharpness setting Format SHARP=<Sharpness setting:Number> GET □ SHARP / ? △ SHARP Setting values for <Shar pness setting:Number> are -10 to 10. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly .
WUX5000 / WUX4000 User Commands - 64 - SIGNAL_INFO Input signal information inquiry Format GET □ SIGNAL_INFO / ? △ SIGNAL_INFO Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - .
WUX5000 / WUX4000 User Commands - 65 - SIGNALST A TUS Signal status inquiry Format GET □ SIGNALSTATUS / ? △ SIGNALSTATUS Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Respon.
WUX5000 / WUX4000 User Commands - 66 - TEMP T emperature sensor value inquiry Format GET □ TEMP / ? △ TEMP Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response For ' GET .
WUX5000 / WUX4000 User Commands - 67 - 7. Error List Item Code TY PE Error character strings Error Remedy 1 0001 e BAD_SEQUENCE Communication sequence err or Wait until a response is receiv ed before sending the next command. 2 0002 e INVALID_COMMAND Invalid (undefined) command.
WUX5000 / WUX4000 User Commands - 68 - Item Code TY PE Error character strings Error Remedy 201F e INVALID_SIGNAL Cannot execute command with current input signal. Change the input signal. 17 0801 e INVALID_VALUE Numerical parameters are invalid or outside the specified range.
WUX5000 / WUX4000 User Commands - 69 - 8. Error Processing YES YES YES YES YES YES YES YES YES YES YES YES YES YES Error judgment START Invalid command format? "INVALID_FORMAT" Command execu.
WUX5000 / WUX4000 User Commands - 70 - YES YES YES YES NO YES YES Incorrect input source? "INVALID_SOURCE (**)" Limitations in input source? Requires input signal? No input signal? "NO_.
WUX5000 / WUX4000 User Commands - 71 - 9. Other Use the remote control emulation function (RC command) for the following functions. Function PC command parameter Presentation timer P_T IMER.
An important point after buying a device Canon WUX5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon WUX5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon WUX5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon WUX5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon WUX5000 will certainly help you make a decision on the purchase.
If you already are a holder of Canon WUX5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon WUX5000.
However, one of the most important roles played by the user manual is to help in solving problems with Canon WUX5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon WUX5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
