Instruction/ maintenance manual of the product PIXMA MX860 Canon
Go to page of 18
<< Pr evious Next >> Installing Y our Multifunction t o Y our Netw ork for the Fir st Time PIXMA MX860 Windows OS 1.
<< Pr evious Next > > Installing Y our Multifunction t o Y our Netw ork for the First Time PIXMA MX860 Windows OS Preparing to Connect My Multifunct ion to My Network 3 Network R equiremen.
Network R equirements Bef ore connecting the machine to the netw ork, make sure that c onfiguration of the computer and access point or router is complete, and that the c omputer is connected t o th e netw ork.
Pr eparing t o Connect My Multifunction T o My Ne twork << Pr evious Next > > Be sure to prepare an access point. Important Information Y ou Need Before Adding Y our Multifunction The following information is required to connect to your access point or router.
Pr eparing Y our Multifunction << Pr evious Next > > Pr eparing Y our Multifunction Note : The procedures below are for Wireless LAN setups not usin g the WPS (Wi-Fi Protected Setup ) or WCN (Windows Connect Now) setup methods At thi s point the USB cable should not be connected between the computer and printer.
Pr eparing Y our Multifunction << Pr evious Next > > 6 Step Three Select Device settings , then p ress the OK button. Step Four Select LAN settings , then press the OK button.
Pr eparing Y our Multifunction << Pr evious Next > > 7 Step Seven Press the On button to turn off the printer. Conn ect the US B cable to the prin ter and computer Step Five Select Change wireless / wir ed, then press the OK button. Step Six Select Wireless LAN a ctiv e , then press the OK button.
Downloading and Ins talling the Driver s Downloading the Driver To use the m achine by connecting it to a computer, software in cluding the drivers needs to be copied (in stalled) to the compu ter 's hard disk. The installatio n process takes about 20 min utes.
Downloading and Ins talling the Driver s << Pr evious Next > > 9 Step Three In the Drivers section, click the Do wnload icon for the MP Driver for Network * The file name turns red when the mouse pointer is on the file name.
Downloading and Ins talling the Driver s << Pr evious Next > > Step Four On the next screen, read the information and instructions and click I Agree - Begin Download Select [Save] or [Run].
Step One Click Ea sy Install . Step T wo Click Insta ll . Inst alling the Driv er NOTE: If a User Account Control screen appears, click Continue or Yes (depending on Windows version) to continu e. NOTE: If the same screen reappears in subsequ ent steps, click Continu e or Yes .
Step Four Click Yes on the License Agreement. If the Please Allow All Install Wizard Processes screen appears, click Next . Installation s tarts. Follow an y on-screen instructions to install the software. Step Three Select Use the Printer o n network and click Next .
Step T wo When the Printer Conne cti on screen appears, connect the machine to the computer with a USB cable, then turn on the machine. Set up the machine over a USB connection until the network connection is complete. Step One On the Setup Method screen, select Connect printer to the ne twork for the first time , then click Next .
Step Four Detect Access Point. When the Access Points screen appears, select an access point to use, then click Connect. When an access point is detected auto matically, the Access Points screen does not ap pear.
Step Six (Windows XP /2000 Only) When the Network Setu p of the Card Slot dialog b ox appears, specify the drive letter, then click Next . Step Five Detect the Machine When the Set Printer IP Address screen appears, click Connect . If the machin e is detected automatically, the Set Printer IP Ad dress screen do es not appear.
Step Eight Turn off the machine, place the machine in the location where you will use it, and turn it back on again. Step Seven When the Setup Completion dialog bo x ap pears, remove the USB cable, then click Next .
Step T en Confirm the measurement results, then click Finish . Ensure that i s displayed in Connection performance between the printer and the access po int If any symbol other than i s displayed, refer to displayed comments and Help for improving the status of communicat ion link.
Step Eleven Click Exit. Setup is complete << Pr evious Next >> 18 Downloading and Ins talling the Driver s.
An important point after buying a device Canon PIXMA MX860 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon PIXMA MX860 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon PIXMA MX860 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon PIXMA MX860 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon PIXMA MX860 will certainly help you make a decision on the purchase.
If you already are a holder of Canon PIXMA MX860, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon PIXMA MX860.
However, one of the most important roles played by the user manual is to help in solving problems with Canon PIXMA MX860. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon PIXMA MX860 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
