Instruction/ maintenance manual of the product 33620 DK-M AEG
Go to page of 20
33620 DK -M Electric Ceramic Hob Operating Instructions.
.
Congratulations from AEG Dear Customer, Congratulations with your new Hob. It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob.
Contents P a g e n o For the user Congratulations from AE G ........................................................................ . 3 Safety informatio n ....................................................................................... . 5 Description of the produc t .
5 Safety information These warnings are pro vided in the interests of your safety . Ensure you fully understand them before installing or using the appliance. Y our safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance.
Description of the product 6 Residual heat indicator Rear cooking zone Front cooking zone Control knobs Pilot light.
7 Control knob (to the left) Control knob for regulating the plate at the rear Control knob for regulating the plate at the front. The regulating of heat is graduation-free for both plates on a scale from 1 to 3 . “1” Represents lo west heat “ 3 ” Represents maximum heat.
8 Pilot light Pilot light is acti vated when either of the zones are turned on, and will remain on until the cooking zones are switched of f. Residual-Heat indicator Each plate has a residual heat indicator which remains on as long as the temperature of the cooking zone exceeds 80˚C, e v en if the cooking zone is switched of f.
9 Advice and hints for using the cooking zones If you use the advice below you will save energy and make your cleaning tasks easier. Adjust the cooking zones correctly. Select the highest setting for the cooking zones until the food is brought to the boil.
10 Check whether your cooking utensils has level bases by placing the item in question upside down on a work top and positioning a ruler on the base. A curved base, both inwards and outwards, will prolong the cooking time and increase the energy consumption.
Cleaning and maintenance of For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. Never use metal wool, metal sponges or other abrasive cleaning agents.
Tips on the use of the ceramic hob unit Do not slide saucepans across the surface of the hob - alw ays lift the pan when placing it on, or removing it from the ceramic surface. W ipe the bottom surface of the pots and pans with a clean dry cloth before placing them on the ceramic surface.
The decorati ve pattern on the ceramic surface can become scratched and marred with use, depending upon maintenance, but does not adv ersely af fect performance. Such blemishes are not co ver ed by the warranty and do not affect the operation of the hob .
Warnings about electrical connection l Any electrical work requir ed to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current r egulations.
Electrical connection This hob is provided with a connection cable type H05 V 2 V 2 -F T90, section 3 x 1,5 mm 2 . A suitable plug must be fitted to the cable and then connected to a suitable plug, according with spexcification given on the rating plate.
Warnings about building in the hob l Ensure the eventual plastic covering of the furnitur e unit has been fixed with a heatpr oof adhesive (100 ° C heatproof). l Fitting of solid wood panel border s on the working top or behind the hob is allowed provided that minimum distances ar e observed.
Building in Dimensions Cut Out Size The dimensions of the cut-out ar e given in the diagr am. If 30 cm. hobs with differ ent functions must be built in one beside the other (e.g. 2 Plate Hob + 2 burner s Hob), the minimum distance shown in the diagr am must be observed.
30 20 min a Removable panel Securing the hob into the cut out Proper arrangements must be taken in designing the furnitur e unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in diagram.
Technical data Dimensions in mm: Hob H x W x D 8 x 290 x 5 10 Cut Out W x D 270 x 490 Heating Elements Ratings in W att: F r ont Hotplate Ø 145 mm . 1200 Rear Hotplate Ø 180 mm .
Servicing If you are not able to find any hint for a fault in this Instruction Book, you should contact our After-sales Service. When calling for an engineer , please remember you will be r equested to specify the following data: E-Nr . _______________________ F-Nr .
An important point after buying a device AEG 33620 DK-M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 33620 DK-M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 33620 DK-M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 33620 DK-M you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 33620 DK-M will certainly help you make a decision on the purchase.
If you already are a holder of AEG 33620 DK-M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 33620 DK-M.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 33620 DK-M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 33620 DK-M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
