Instruction/ maintenance manual of the product MF4370DN Canon
Go to page of 44
Over view of Machine F unctions Set Up the Machine to Suit Y our Purposes Set Up the Machine Make F ax Settings Set Up Network Connection (MF4370dn Only) Set Up Computers and Software Appendix Please read this guide bef ore operating this pr oduc t. After you nish reading this guide , store it in a saf e place for future r eference .
C on ten ts Over view of Machine F unctions .................................................................................................................... 1 A vailable F eatures ...................................................................
1 Ov er view of Machine F unc tions This manual describes how to set the r equired settings to set up the machine and install the software. After you set up the machine, you can use the functions described in the illustration bellow . F or the details of each function, refer to the Basic Operation Guide and e-Manual.
2 1 Set Up the Machine to Suit Y our Pur poses Determine which machine functions (Copy , F ax, Print, PC P rint, PC F ax, Scan, Remote UI) you intend to use , and make the settings according t o the owchart below . F or example, when you use c opy function only, f ollow “Required Settings.
3 2 Set Up the Machine Items Included with the Machine MF4370dn Machine ● Dust Cover ● Paper C assette ● Document F eeder T ray ● MF4350d Machine ● Dust Cover (enclosed in the machine) ● D.
2 Set Up the Machine 4 Items for A ll Models T oner Car tridge ● Po wer Cord ● T elephone Cable ● Destination Labels ● Starter Guide ( This Document) Basic Operation Guide User Manual CD-ROM U.
2 Set Up the Machine 5 Install T oner Car tridge This section describes the installation procedure f or the toner car tridge. Starter Guide ( This Document): The Starter Guide contains the machine setup and software installation. Read this guide before operating this product.
6 2 Set Up the Machine 3 Gently rock the toner cartridge several times to evenly distribute the toner inside . 4 Place the toner cartridge on a at sur face and pull the seal completely out.
7 2 Set Up the Machine 10 I nser t the toner cartr idge so that the protrusion on the right side of the toner car tridge (A) ts int o the guide (B) located on the right side of the machine and slide it down parallel to the guide . 11 Push the toner car tridge to make sure it is properly set in the machine.
8 2 Set Up the Machine Set Up Paper C assette and Load P aper F or MF4370dn 1 Align the guides (B) on the both edges of the paper cassette to the protrusions ( A) inside the machine.
9 2 Set Up the Machine 7 Load the paper int o the paper cassette with the print side up . Make sure the paper stack sits below the small n (A ) on the side paper guide. 8 Adjust the paper guide rail t o match the size of paper . 9 Close the front panel of the paper cassette .
10 2 Set Up the Machine F or MF4350d 1 Open the paper feeding tra y . 2 T ake out the dust cover fr om inside the machine. 3 Slide out the paper guide rail (A ). 4 Slide the side paper guides (A) t o match the size of paper . If the paper guides do not t the size of the paper , the printout may be skewed .
11 2 Set Up the Machine 7 Adjust the paper guide rail t o match the size of paper . 8 Aligning the protrusions ( A) on the both sides of the dust cov er to the guides (B) inside the machine, set the dust co ver . 9 Attach the document f eeder tray on the document feeder .
12 2 Set Up the Machine 1 Connect the power cor d into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main pow er switch (A ) to turn ON. Do not connect the machine and the computer with a USB cable at this time.
13 3 Mak e F ax S ettings This section describes the fax settings. C onnec t T elephone Cables Connect the supplied telephone cable to the telephone line jack ( A) on the back side of the machine and the wall jack.
3 Make F ax Settings 14 Use the keys below t o enter information in the machine. Y ou can enter the following characters in each input mode: Use the – [numeric keys] to enter characters. Pr ess – [numeric keys] repeat edly until the required char ac ter appears.
15 3 Make F ax Settings The L CD display turned OFF : The machine may enter the Sleep mode while you ar e per forming setup. P ress [Energy Saver] to turn the display back ON and c ontinue the setup. 1 Pr ess [M enu]. 2 Pr ess [ ] or [ ] to select <5 F AX SET TINGS>, then press [ OK ].
16 3 Make F ax Settings Set Date and Time Before using the machine , you MUST set the current dat e and time. The current dat e and time settings are used as standard timer settings f or func tions that require them. Entering Information Use – [numeric keys] to enter numbers.
3 Make F ax Settings 17 Selec t the Receiv e Mode that Suits Y our N eeds About the Rec eive Modes <F axOnly> Receives faxes aut omatically. When you use only the fax function, select this mode without connecting to the external telephone. When Receiving F AX ● The machine receiv es faxes automatically .
18 3 Make F ax Settings The rec eive mode determines how the machine responds to inc oming faxes and voice calls . Selec t the mode that most suits your needs from the chart below . F or more information about the r eceive modes, see “ About the Receive Modes, ” on p.
3 Make F ax Settings 19 By default, the telephone line type on the machine is set to tone dialing . I f you use tone dialing , skip the following pr ocedure. If you use pulse dialing, f ollow the procedur e below and change the telephone line type setting on the machine to pulse dialing.
20 4 A category 5 or greater twisted pair LAN cable is compatible with the machine . Connect one end to the 10Base - T/100Base - T X por t on the back of the machine and the other end to a network router or a hub . Set Up Netw ork C onnec tion (MF4370dn Only) If you are using the MF4350d, skip this chapter .
21 4 Set Up Network C onnec tion (MF4370dn Only) C onnec t the Machine to Networ k T o use the machine by connecting to the network, you must set up the IP address . An IP (Internet Pr otocol) address is an identication number assig ned to each individual computer connected to the Internet.
22 4 Set Up Network C onnec tion (MF4370dn Only) The L CD display turned OFF: The machine may enter the Sleep mode while you ar e per forming setup. P ress [Energy Saver] to turn the display back ON and c ontinue the setup. 1 Pr ess [M enu]. 2 Pr ess [ ] or [ ] to select <11 SYSTEM SET TINGS>, then press [ OK ].
23 5 T ypes of Connection between C omputers and the Machine There ar e two ways to connect the machine and computers: USB c onnec tion and network connection Network Connection is available only for MF4370dn. Networ k Connection (For details about the set up , see p .
24 5 Set Up Computers and Software System Requir ement Microsoft W indows 2000 CPU: Intel Pentium/133MHz or faster Memory : 128MB or more Microsoft W indows XP CPU: Intel Pentium/C eleron series 300MH.
25 5 Set Up Computers and Software <Bundled Pr ograms> ScanSof t OmniPage ScanSof t OmniP age makes it easy to conv er t scanned paper documents and images from image les into editable text for use in y our favorite c omputer applications. F or details, see online help for this pr ogram.
26 5 Set Up Computers and Software Networ k Connection (MF4370dn Only) Before Installation The f ollowing procedures ar e explained using sample screens fr om Windo ws XP Pr ofessional. The screen ma y dier acc ording to the opera ting system, as w ell as the type and version of the printer driv er .
27 5 Set Up Computers and Software 6 If the rewall is applied to the operating system, the dialog bo x below appears. Click [Y es] and continue the installation. 7 ① Selec t your machine on the list. Make sure that the machine name is highlighted.
28 5 Set Up Computers and Software 13 The name of the machine displayed on this screen varies depending on the model of your machine. 14 A printer test page is printed out from the machine. The name of the machine displayed on this screen varies depending on the model of your machine.
29 5 Set Up Computers and Software 3 4 Select the same language as your operating system. If you selected a language that is not same as your operating syst em, the characters may be garbled. 5 6 7 8 9 The Readme le opens. After reading it, close the window .
5 Set Up Computers and Software 30 Check Installation V erify that the driver has been installed successfully and that the machine has been set as the default print er . If the name of the machine is selected on the [Printer] screen from an applica tion, it is set as the default printer .
31 5 Set Up Computers and Software USB C onnec tion Before Installation The f ollowing procedures ar e explained using sample screens fr om Windo ws XP Pr ofessional. The screen ma y dier acc ording to the opera ting system, as w ell as the type and version of the printer driv er .
32 5 Set Up Computers and Software 7 8 9 10 11 12 13 14 After checking [Restar t Computer Now (recommended)] butt on, you can restart your computer by clicking the [Restar t] button. 15 The machine has a cap (A ) that covers the USB port on the back of the machine.
33 5 Set Up Computers and Software 17 Remove the User Software CD-ROM. Installation is complete..
5 Set Up Computers and Software 34 Check Installation V erify that the driver has been installed successfully and that the machine has been set as the default print er . If the name of the machine is selected on the [Printer] screen from an applica tion, it is set as the default printer .
35 6 Appendix User Manual CD-ROM (e -M anual) The User Manual CD-ROM (e -Manual) is a sof tware that enables you t o selec t and view the HTML Manuals included on the CD-ROM via your computer screen. The manual describes all of the functions and troubleshooting for the machine .
36 6 Appendix Using the U ser Manual CD-ROM (e -Manual) When using the e -Manual with Window s, follow the st eps below . Install the e -Manual on your computer . 1. Inser t the User Manual CD-ROM on your computer . 2. Select the language. 3. Click [Install] button.
37 6 Appendix When you start the e -Manual, the screen below is display ed. If you are using a brow ser such as Internet Explore for Windows XP , ActiveX blocks pop -ups in the background. If the e-Manual is not displayed pr operly, look f or an information bar at the top of the page and click the information bar .
.
.
.
C ontac ting Ser vice C enter When you ha ve a problem with your machine and y ou cannot solve it even if you r efer to the manuals or online help , please contact our Canon Authorized Ser vice F acilities or the Canon Customer Car e Center at 1-800-828- 4040 between the hours of 8:00 A.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success , NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROP A N.V . Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.
An important point after buying a device Canon MF4370DN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon MF4370DN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon MF4370DN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon MF4370DN you will learn all the available features of the product, as well as information on its operation. The information that you get Canon MF4370DN will certainly help you make a decision on the purchase.
If you already are a holder of Canon MF4370DN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon MF4370DN.
However, one of the most important roles played by the user manual is to help in solving problems with Canon MF4370DN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon MF4370DN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
