Instruction/ maintenance manual of the product LV-7575 Canon
Go to page of 63
LV -7575 User’ s Man ual MUL TIMEDIA PR OJECT OR.
2 CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFET Y INS TRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCE The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Po wer Cor d for the Unit ed States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 ADJUSTABLE FEET 10 INSTALLING PROJECTOR IN PROPER POSITION 10 MOVING PRO.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM OF CABINET BACK OF CABINET FRONT OF CABINET LAMP COVER ADJUSTABLE FEET AND FEET LOCK LATCHES This projector is equipped with cooling fans for protecting from overheating. Pay attention to the following matters to ensure proper ventilation and avoid a possible risk of fire and malfunction.
NO TE ON POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and a proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING PROJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 1.4 m (4.6’)–14.7 m (48.2’). ● Refer to the figure below to adjust the screen size. Screen Size Distance 40” 31” 1.
10 PREP ARA TION AD JUST ABLE FEET INS T ALLING PROJECT OR IN PROPER POSITION Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard. Do not tilt the projector more than 10 degrees from side to side. Do not put the projector on either side to project an image.
11 PREP ARA TION CA UTION IN CARRYING OR TRANSPOR TING A PROJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by courier or any other transport service in an unsuitable transport case.
12 CONNECTING PROJECT OR S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT AUDIO 2 RGB ANALOG IN/OUT RGB DIGIT AL INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H/V V ( MONO ) .
13 CONNECTING PROJECT OR S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT AUDIO 1 AUDIO 2 RGB ANALOG IN/OUT RGB DIGITAL INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H /V V (.
14 CONNECTING PROJECT OR CONNECTING T O VIDEO EQUIPMENT S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT AUDIO 1 AUDIO 2 RGB ANALOG IN/OUT RGB DIGITAL INPUT 1 INPUT 2.
15 BEFORE OPERA TION FOCUS BUTTON Used to adjust focus. (p.22) AUTO PC ADJ. BUTTON Use to operate the AUTO PC Adjustment function. (p.26) KEYSTONE BUTTON Used to correct keystone distortion. (pp.22, 38) IMAGE BUTTON Used to select the image level. (pp.
16 BEFORE OPERA TION To insure safe operation, please observe following precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid.
17 BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close the On-Screen Menu. (p.18, 19) MENU BUTTON LAMP MODE BUTTON READY INDICATOR OK BUTTON POWER BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select a Lamp mode.
18 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU You can control and adjust this projector with On-Screen Menu. Refer to the relevant pages to operate each adjustment. 2. MOVING POINTER 3. SELECT ITEM Move the pointer ( ✽ see below) or adjust a value of an item by pressing the POINT buttons on the top control or on the remote control unit.
19 BEFORE OPERA TION MENU BAR FOR PC SOURCE Press the MENU button when connecting to the PC input source. FOR VIDEO SOURCE Press the MENU button when connecting to the VIDEO input source. Same function as menu for PC source. Same function as menu for PC source.
20 BA SIC OPERA TION TURNING ON THE PROJECT OR TURNING ON / OFF PROJECT OR Connect the projector’s AC power cord into an AC outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the POWER button on the top control or on the remote control unit.
21 BA SIC OPERA TION Press the POWER button on the top control or on the remote control unit, and “Power off?” appears on the screen. Press the POWER button again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off.
22 BA SIC OPERA TION AD JUS TING SCREEN “Zoom” disappears after 4 seconds. “Focus” disappears after 4 seconds. ZOOM AD JUSTMENT FOCUS AD JUSTMENT 1 Press the ZOOM button on the top control or ZOOM ▲ / ▼ buttons on the remote control unit. “Zoom” appears on the screen.
23 Press the FREEZE button on the remote control unit to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. Press the NO SHOW button on the remote control unit to black out the image.
24 SELECTING INPUT SOURCE WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 1 and then press the OK button.
25 COMPUTER INPUT SELECTING COMPUTER S Y S TEM This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on pages 55–56).
26 COMPUTER INPUT PC AD JUS TMENT AU TO PC AD JUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Auto PC Adjustment function can be operated as follows.
27 COMPUTER INPUT MANU AL PC ADJUS TMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which may not be tuned by the Multi-Scan system of this projector.
28 COMPUTER INPUT Exit the PC ADJUST Menu. To store the adjusted parameters, move the red frame pointer to the Store icon and then press the OK button. Move the red arrow pointer to any of the Mode 1 to 10 in which you want to store the parameters and then press the OK button.
29 COMPUTER INPUT PICTURE IMA GE SELECT Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the OK button.
30 PICTURE SCREEN AD JUS TMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon.
31 When the video input signal is connected to the Y- Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 1 Move the pointer to a source that you want to select and then press the OK button.
32 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO S Y S TEM Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon.
33 VIDEO INPUT PICTURE IMA GE SELECT Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the OK button.
34 PICTURE SCREEN AD JUS TMENT This projector has a picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon.
35 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired item and then press the OK button.
36 PICTURE IMA GE Auto picture control Press the POINT LEFT/RIGHT buttons to select the desired Auto picture control position. The part where the image is dark is emphasized. It is emphasized more strongly in order of Off, L1, L2. Off . . . . Auto picture control OFF position.
37 Press the POINT LEFT/RIGHT buttons to adjust the gamma value to obtain better balance of contrast (from 0 to 15). Gamma Press the POINT LEFT button to decrease the sharpness of the image; press the POINT RIGHT button to increase the sharpness of the image (from 0 to 31).
38 Keystone Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.
39 SET TING This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Logo PIN Code Lock Dialog Box Quit Pointer After a correct Logo PIN code is entered, the following dialog box appears. Select On/Off by pressing the POINT LEFT/RIGHT buttons or change the Logo PIN code.
40 SET TING Ceiling Rear Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling- mounted projector. Rear When this function is “On,” the picture is left/right reversed.
41 Lamp mode This function allows you to change the brightness of the screen. Auto mode . . . . . brightness according to the input signal. Normal mode . . . normal brightness. Silent mode . . . . . lower brightness reduces the lamp power consumption and extends the lamp life.
42 SET TING This Projector has a USB port for interactive operation between the projector and computers. Set the mode by following the steps below. Wireless Mouse mode Select “ ” when controlling a computer with the remote control unit of this projector.
43 SET TING The PIN code can be changed to your desired four-digit number. Select “PIN code change” with the POINT DOWN button, and press the OK button. A New PIN code input dialog box appears. Select a number with the POINT LEFT/RIGHT buttons and fix the number with the OK button.
44 This function is used to reset the Lamp replacement counter. When replacing the projection lamp, reset the Lamp replacement counter with this function.
45 WIRELESS MOUSE INST ALLA TION Remote control unit is not only able to operate this projector but also functions as a wireless mouse for most personal computers. The MOUSE POINTER, DRAG ON/OFF button, and two CLICK buttons are used for wireless mouse operation.
46 MAINTENANCE W ARNING TEMP . INDICA T OR The Warning Temp. indicator blinks red to let you know the internal temperature of the projector exceeds a normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator goes out.
47 CLEANING PROJECTION LENS Apply a non-abrasive camera lens cleaner to a dry soft cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents ,or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, put the lens cap.
48 APPENDIX Turn off the projector and unplug the AC power cord. Allow the projector to cool for at least 45 minutes. Loosen the two (2) screws with a screwdriver and pull out the lamp assembly by using the built in handle. 1 3 Replace the lamp assembly with a new one and tighten the two (2) screws.
49 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp replacement counter after the lamp assembly is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. NOTE: • Do not reset the Lamp replacement counter until after the projection lamp is replaced.
50 APPENDIX TROUBLESHOO TING Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in “CONNECTING PROJECTOR” on pages 12–14.
51 APPENDIX Remote control unit does not work. ● Check the batteries. ● Check if the ALL-OFF switch on the remote control unit is set to “ON.” ● Make sure there is no obstruction in between the Infrared remote receiver of the projector and the remote control unit.
52 APPENDIX Computer Input MENU TREE Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb, Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Monitor out Video RGB Go to S.
53 APPENDIX V ideo Input System (2) Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N System (3) Auto 1080i 1035i 720p 575p 480p 575i 480i Screen Normal Wide Computer Input/V ide Input Image Adjust Contrast Brightness Color Tint Color management Auto picture control Color temp.
54 APPENDIX Computer Input/V ide Input Setting Language Anamorphic German Chinese Japanese Quit Store/Reset Blue/User/Black Off/Countdown Off/On Logo select Capture Logo PIN code lock On/Off On/Off En.
55 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.
56 APPENDIX NOTE: Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 (Progressive) 31.47 59.88 D-575p 768 x 575 (Progressive) 31.25 50.00 D-SVGA 800 x 600 37.
57 APPENDIX • • • on • • • dim • • • off • • • blinking * When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly.
58 APPENDIX ● Specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
59 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal: HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz.
60 APPENDIX OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, specify the item name and its Type No. to the sales dealer. ● HDB 15 pin-SCART 21 pin Cable Type No. : LV-CA31 ● Ultra Wide Angle Lens Type No. : LV-IL01 ● Wide Angle Zoom Lens Type No.
61 APPENDIX DIMENSIONS 60.6 (2.39) 10.5° 429.5 (16.8) 319.0 (12.6) 168.0 (6.61) 91.5 (3.60) 142.0 (5.59) 141.5 (5.57) Screw Holes for Ceiling Mount Screw: M6 Depth: 10.0 (0.393) 230.0 (9.06) 134.0 (5.28) 114.0 (4.49) 115.5 (4.55) 117.0 (4.61) 95.0 (3.
62 APPENDIX Put on the label below (supplied) in a prominent place of the projector’s body while it is locked with a PIN code. While the projector is locked with the PIN code.
© CANON INC . 2006 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U .S.A., INC. One Canon Plaza, Lake Success , NY 11042, U. S .A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LA TIN AMERICA, INC.
An important point after buying a device Canon LV-7575 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon LV-7575 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon LV-7575 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon LV-7575 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon LV-7575 will certainly help you make a decision on the purchase.
If you already are a holder of Canon LV-7575, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon LV-7575.
However, one of the most important roles played by the user manual is to help in solving problems with Canon LV-7575. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon LV-7575 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
