Instruction/ maintenance manual of the product LU_A 80 Canon
Go to page of 160
CaHOH Digital Video Camcorder Instruction Manual Camescope num_rique Manuel d'instruction Videoc&mara digital Manual de Instrucciones £LU a 90/£LU A 8S/ £LU_A 80 PUB.
Important Usage Instructions WARNINGt TO REDUCE THE RiSK OF FiRE OR ELECTRIC SHOCK, DO NOT EXPOSE THiS PRODUCT TO RAIN OR MOISTURE. WARNINGt TO REDUCE THE RiSK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING iNTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
In these safety instructions the word "product" refers to the Canon Digital Video Camcorder ELURA901ELURA85tELURA80 A and all its accessories. 1. Read Instructions -- All the safety and operating instructions should be read before the product is operated.
Fig. 1 ........................ As PER NATIONAL ELECTRtCAL CODE _ROUND _NEC SECTION 8_20} _ROUND_NG CONDUCTORS _NEC SECTEON 8_0-2_ _OUN_CLAMPS RWCE GROUNDING ELECTRODE SYSTEM NEC- NATEONAL E_CTRtCAL CODE _NEC ART 2_0 PART H_ 14.
Using this Manual Thank you for purchasing the Canon ELURA90/ELURA85/ELURA80. Please read this manual carefully before you use the camcorder and retain it for future reference. Change the display language before you begin (_76). SymbQ!s _nd References Usedin This Manual O _ : Precautions related to the camcorder operation.
Table of contents introduction Using this Manual ............................................................................................ 5 Checking Supplied Accessories ...................................................................... 8 Components Guide .
Editing Recording to a VCR or Digital Video Device ................................................. 79 Recording from Analog Video Devices (VCR, TV or Camcorder) ................. 81 Recording from Digital Video Devices (DV Dubbing) .................
Checking Supplied Accessories CA-570 Compact Power Adapter (incl. power cord) Lithium Button Battery CR2025 for Wireless Controller IFC-300PCU USB Cable NB-2LH Battery Pack Lens Cap and Lens Cap Cord .
Components Guide @ @ @ @ ® @ @ _) REC SEARCH + button (C[3 29)/ (fast forward) button (C[3 34) t CARD 4- button (_ 108) @_ REC SEARCH - button (C_ 29) t _3 (record review) button ([_29) t (rewind) button (_ 33)t CARD - button ([_ 108) (3_ D.
@ © @ @ @ @ @ ® © @ @ 0_ Dioptric adjustment lever (C[3 18) (_ Viewfinder (_ 18) ® Strap mount ([Z] 19) (4_ DC IN terminal (_ 13) (_) Start/stop button ([_ 25, 100) UNLOCK button (C[_ 134) _7_Powe.
® ® ® Bottom View ® mmm_ = o Terminal cover MIC terminal* (C:[3 62) AV terminal (E_ 36) t _) (phones) terminal (C[3 35, 61 ) _ DVterminal (C[3 79, 88) ® USB terminal (_ 118, 129) ®,Flash* (C[_ 97) * ELURA90/ELURA85 only.
WireJess Con -D85 G ® ® ® ® ® ® ® @ --@ @ @ @ @ @ _ Transmitter (_) START/STOP button (C]:3 25, 100) _b CARD -t+ buttons (C[3 108) _!) DATE SEARCH N_tt_JN buttons ([_ 74) (_ REW _ button (E:Z3 33) (_)-t_ H button (1:_ 34) _7_PAUSE |l button (C:[3 34) (_ SLOW _1_- button ([:Z3 34) (_ AUDIO DUB.
Preparing the Power Supply Atta c hi ng the B art cry Pack 1. Turn the POWER switch to OFF. 2. Move the viewflnder upward. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Press lightly and slide it in the direction of the arrow until it clicks.
Using old Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. 1. Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter.
O Charging, Recording and Playback Times Below times are approximate and vary according to the charging, recording or playback conditions. NB-2LH NB-2L BP-2L12 I BP-2L14 _ Charging Time 135 m n. 120 m n. 210 m n. 240 min. Max. Recording Time Viewfinder 120 min.
Loading/Unloading a Cassette Use only videocassettes marked with the _°_D logo. 1. Slide the OPEN/EJECT switch and Tape protection tab open the cassette compartment _-_ cover. The cassette compartment opens automatically. 2. Load/unload the cassette.
Ins,ailing ,he Backup Ba**ery The backup battery (lithium button battery CR1616) allows the camcorder to retain date, time (_ 22) and other camcorder settings while the power source is disconnected. | Connect a power source to the camcorder when replacing the backup battery to retain the settings.
Preparing the Camcorder Ad j U _t i _ g h i_ wf in d:_ _ D i Q t _i Adj u st m e n t) 1. Turn on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder. 3. Adjust the dioptric adjustment lever. 4. Push the viewfinder back in. 1. Attach the cord to the lens cap.
Atta th u Pass the ends through the strap mount and adjust the length of the strap. SS-900 Sho _ MnHnfinn fh_ Wi__ Aff_r.hm__nf The WA-34 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.7x). The wide attachment is for use at maximum wide-angle.
Using the Wireless Controller Point it at the camcorder's remote sensor when you press the buttons. inserting the Batt_ ............. ...... The wireless controller operates with a lithium button battery CR2025. 1. Press the tab in the direction of the arrow and pull out the battery holder.
Adjusting the LCD Screen Rotating the LCD Screen Press the OPEN button and open the LCD panel 90 degrees. • You can rotate the panel downward by 90 degrees. • You can rotate the panel by 180 degrees toward the lens. LGD Backlight You can switch the brightness of the LCD screen between normal and bright by pressing _ the LCD BACKLIGHT button.
Setting the Time Zone Date and Time Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery. MENU ] ([_ 38) SYSTEM _> T.ZONE/DST,,,N.Y. 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [SYSTEM] and press the [ SET dial.
7. Press the MENU button to close the menu and to start the clock. NO, [] [] [] [] [] [] [] [] [] [] [] [] Time zone No, Timezone LONDON [] WELLGTN (Wellington) PARIS [] SAMOA CAIRO [] HONOLU, (Honolulu) MOSCOW [] ANCHOR. (Anchorage) DUBAI [] L,A, (Los Angeles) KARACHI [] DENVER DACCA [] CHICAGO BANGKOK [] N,Y, (New York) H.
Di g Date m i_g Q _d i _g You can display the date and time in the lower left corner of the screen. 1 MENU DISPLAY SETUP/_ _ D/T DISPLAY,,OFF ([_ 38) J 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [DISPLAY SETUP/_- ] and press the SET dial.
Recording Movies on a Tape Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads ([_ 142). 1. Remove the lens cap. 2. Set the camcorder to CAMERA mode. Set the POWER switch to CAMERA and the TAPEICARD switch to @.
O About the LCD and viewfinder screen: The screens are produced with extremely high-precision manufacturing techniques, with more than 99,99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black or green dots.
When [LCD MIRROR] is set to [ON], only tape or card operation and self-timer displays appear on the LCD screen (all displays appear on the viewfinder screen).
ScreenDisp|ays during RecQrding Indicates the recording time in hours, minutes and seconds. ;;;;;; Indicates the remaining time of the tape in minutes. "_" moves during recording. "_ END" flashes when the tape reaches the end. • When the time left is less than 15 seconds, the remaining tape time may not appear.
Re ie_i n g an d S e ar c b i n g w b e n Re c or d i ng REC SEARCH - button/ @ (record review) button REC SEARCH + button Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly.
Zooming The camcorder is equipped with optical zoom and digital zoom. Zoom in _ T W *_ Zoom out Zoom lever 20x optical zoom 18x optical zoom I : Move the zoom lever toward W to zoom out (wide- _W-T angle). Move it toward T to zoom in (telephoto). Press the zoom lever slightly for a slow zoom.
Dinifn| 7nnm When the digital zoom is activated, the camcorder automatically switches between optical and digital zoom. With digital zoom, image resolution becomes lower the more you zoom in. 80x/400x digital zoom 72x/360x digital zoom (80x in CARD CAMERA mode) (72x in CARD CAMERA mode) MENU ] ([_ 38) CAMERA SETUP _,) DoZOOM .
Tips for Making Better Videos Holdincj the Camcorder For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary, support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens.
Playing Back a Tape If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette (C_ 142). 1. Set the camcorder to PLAY (VCR) mode. Set the POWER switch to PLAY (VCR) and the TAPE/CARD switch to @.
_/|! (PJayback Pause) To pause playback, press the l_/|! button during normal playback. (Fast Forward Playback) / _ (Rewind PJayback) Plays back the tape at 9.5 times normal speed (forward or reverse). Press and hold the button during normal playback or fast forward.
Adjusting the Volume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder. SET dial _h, (phones) terminal Speaker "bOO The headphones terminal also serves as AV terminal.
Playing Back on a TV Screen The AV terminal also serves as headphones terminal. When "_" is displayed on the screen, change the setting following the procedure below. I 1 MENU VCR SETUP I_ AV/PHONES _ ..AV ([_ 38) J Open the menu and select [VCR SETUP].
Se! ctin g tbeAudio ................................... You can select the output channels when playing back a tape with audio recorded on two channels. 1 MENU AUDIO SETUP I_ OUTPUT CH .... L/R ([_ 38) J 1. Press the MENU button to open the menu. 2. Turn the SET dial to select [AUDIO SETUP] and press the SET dial.
Menus and Settings Many of the camcorder's advanced functions are selected from menus that appear on the screen. SET dial MENU button Se!_,c,tin N,_,n u_ ,an d,,, Settings .... 1. Press the MENU button to open the menu. 2. Turn the SET dial to select a submenu and press the SET dial.
M_,,,u,,,,,,,,_nd Defau!t Settings Default settings are shown in boldface. CAMERA MENU Submenu D.EFFECT SETUP Menu Item CARD MIX D.E.SELECT FADER TYPE EFFECT TYPE M.S.SPEED M.S.SPLIT CAMERA SETUP SHUTTER A.SL SHUTTER D.ZOOM IMG STAB ((_)) WHITE BAh AF AST LAMP SELF TIMER NIGHT MODE* SKIN DETAIL STILL I.
Submenu I Setting Options [_ DISPLAY SETUP/ 77 ® ON, OFF 26 ON, OFF 135 ON, OFF 24 See list of languages. 76 76 ON, OFF 78 SYSTEM ON, OFF (l_(_P 77 ON, OFF 77 See list of time zones. 22 22 MY CAMERA OFF, DEFAULT, MY SOUND 75 Menu Item BRIGHTNESS LCD MIRROR TV SCREEN D/T DISPLAY LANGUAGE_ DATE FORMAT DEMO MODE WL.
Submenu Menu item Setting Options D.EFFECT SETUP D.E.SELECT OFF, FADER, EFFECT, MULTI-S 63 FADER TYPE FADE-T, WIPE, CORNER, JUMP, FLIP, PUZZLE, ZIGZAG, BEAM, TIDE EFFECT TYPE ART, BLACK&WHITE, SEPIA, MOSAIC, BALL, CUBE, WAVE, COLOR MASK, MIRROR M.
Submenu Setting Options SYSTEM ON, OFF (l_ 77 ON, OFF 77 See list of time zones. 22 22 MY CAMERA OFF, DEFAULT, MY SOUND 75 Menu Item WLREMOTE BEEP T.ZONE/DST D/TIME SET S-UP SOUND SHTR SOUND OPER.
CARD CAMERA MENU Submenu Menu item D.EFFECT SETUP EFFECT CAMERA SETUP SHUTTER A.SL SHUTTER D.ZOOM WHITE BAL AF AST LAMP FOCUS PRI. SELF TIMER ND NIGHT MODE* SKIN DETAIL REVIEW CARD SETUP IMG QUALITY IMAGE SIZE MOVIE SIZE FILE NOS.
Submenu Setting Options SYSTEM ON, OFF (l_ 77 ON, OFF 77 See list of time zones. 22 22 MY CAMERA OFF, DEFAULT, MY SOUND 75 Menu Item WLREMOTE BEEP T.ZONE/DST D/TIME SET S-UP SOUND SHTR SOUND OPER.
CARD PLAY MENU I Submenu Menu Item Setting Options CARD _PRINT ORDERS NO, YES 128 OPERATIONS ALL ERASE (Single Image _TRANS.ORDERS NO, YES 133 Display) ALL ERASE IMAGE ERASE CANCEL, SINGLE, ALL 111 FORMAT CANCEL, EXECUTE 116 CARD _ O_ PROTECT 110 OPERATIONS (index Screen) ,_ _ PRINT ORDER 127 ,_.
Using the Recording Programs D,Easy Re _ Qrd i ng _Qg _ m The camcorder adjusts focus, exposure and other settings automatically, allowing you to just point and shoot. Program AE Modes [_Auto The camcorder adjusts focus, exposure and other settings automatically.
Program selector Availability of Functions in Each Mode: RecordiogProgram , O l_ [] [] _ _ [] Image Stabilizer i x* O I Focus i X (A) O White Balance i x(A) O Shutter Speed i x(A) O ! x(A) Exposure Lock i x O _ Digital Effects i x O _ < Card Mix i x O .
2. Press the SET dial. A list of the program AE modes appears. 3. Select a mode and press the SET dial. The symbol of the mode appears on the upper left corner of the screen. O The setting resets to the Auto mode when you change the position of the program selector.
Using the Night Modes _NIGHT _ NIGHT+ _S. NIGHT Allows you to record in dark places where lights cannot be used, without sacrificing color• The assist lamp lights up and stays on, allowing you to re.
1. Set the program selector to @. 2. Press the NIGHT MODE button. • "_" appears. • Pressing the NIGHT MODE button again resets the camcorder to the Auto mode. O Do not point the mini video light at persons while they are driving. C) Do not look at the mini video light for a long time.
Skin Detail Function When shooting close-ups of people, the camcorder automatically softens details to reduce the appearance of skin imperfections for a more complimentary appearance. I NENU ] ([_38) CAMERA SETUP _ SKIN DETAIL,,NORMAL Open the menu and select [CAMERA SETUP].
Adjusting Exposure Manually SET dial ............................. ! __ Program selector EXP button ...................... Exposure Lock ............................................................................................... ..................
Adjusting the Focus Manually Autofocus may not work well on the following subjects. In such case, focus manually. Subjects with low Through Reflective contrast or without Fast Moving dirty or wet Night Scenes surfaces vertical lines Subjects windows SET dial Zoom lever / FOCUS button .
O The setting resets to autofocus when you switch the program selector to EASY. O Readjust the focus when you have turned off the camcorder. Infinity E_us Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the FOCUS button more than 2 seconds after step 2 in Adjusting the Focus Manually.
Setting the White Balance You can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the optimal setting. | AUTO Auto white balance SET _ Use the custom white balance setting to make white subjects appear white under colored lighting.
C) Use the auto setting for normal outdoor scenes. O When the program selector is set to EASY, white balance is preset to [AUTO]. C) The camcorder retains the custom white balance setting even if you turn it off. However, it resets to [AUTO] when you change the position of the TAPE/CARD switch.
Setting the Shutter Speed You can adjust the shutter speed manually to make stable shots of fast moving subjects. I : I 1 M_NU CAMERA SETUP _F_ SHUTTER ...... AUTO ([_ 38) J 1. Set the program selector to _. 2. Set the program AE mode to the [_ (Auto) mode.
AUtQS|oW 8butte ...................................... In Easy Recording mode and when [SHUTTER] is set to [AUTO] in Auto mode, the camcorder uses shutter speeds down to 1t30 in CAMERA mode and 1t15 in CARD CAMERA mode. This allows you to record brightly in places with insufficient lighting.
Using the SelFTimer The self-timer can be used for recording movies and still images. SET dial bu_on MENU button I button I MENU ] ([_38) CAMERA SETUP _ SELF TIMER,,,OFF 1. Open the menu and select [CAMERA SETUP]. Select [SELF TIMER], _ _> set it to [ON _.
(_[_MENU VCR SETUP38) ]_[REC MODE SP ..... J To change to LP mode, open the menu and select [VCR SETUP]. Select [REC MODE], set it to [LP] and close the menu.
Audio Recording Changing the AudiQ MQde _ [-_ You can record sound in two audio modes--16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later. Select the 16-bit mode for higher sound quality.
The camcorder reduces wind noise automatically. However, you can turn offthe wind screen when recording indoors, or when you want the microphone to be as sensitive as possible. I ........................... * Only when [AUDIO DUB.] is set to [MIC. IN].
Using Digital Effects Faders (_ 65) Begin or end scenes with a fade to or from black. Fade Trigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) i Flip (FLIP) //I! Zigzag (ZIGZAG) Tide (TIDE) Jump (JUMP) .
Effects (_ 66) Add flavor to your recordings. Art (ART) Mosaic (MOSAIC) Wave (WAVE) Black and White (BLACK i & WHITE) i Ball (BALL) Color Mask (COLOR i MASK) Sepia (SEPIA) Cube (CUBE) Mirror (MIRROR) Multi-Image Screen (q3 66) Captures moving subjects in 4, 9 or 16 sequences of still images and displays them at one time.
Availability of Digital Effects by Operating Modes: CAMERA Still PLAY (VCR) Movies Images Faders O x O Effects O x O Multi-image O x O screen CARD CAMERA X O* X CARD PLAY x x x O: Available x : Not available * : Black and White only. In CAMERA mode, set the program selector to @.
Se!e¢_ing a_ Effec_ In CAMERA mode, set the program selector to @. ! 1. Open the menu and select [D.EFFECT SETUPI. 2. Select [D.E.SELECT] and set it to [EFFECT]. 3. Select [EFFECT TYPE], select a setting option and close the menu. The name of the selected effect flashes.
! 1. Open the menu and select [D.EFFECT SETUP]. 2. Select [D.E.SELECT] and set it to [MULTI-S]. 3. Select [M.S.SPEED] and select the transition speed. Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*).
Widescreen TV Recording (16:9) The camcorder uses the full width of the CCD providing high-resolution 16:9 recording. WIDESCREEN button Press the WIDESCREEN button. DRmV£ MODE • "_" appears. • The LCD screen switches to the "letterbox" display.
Magnh ing the Image The playback image can be magnified up to 5 times. SET dial Zoom lever 1. Move the zoom lever toward T. _W=T • The image is magnified by 2 times. • A frame appears indicating the position of the magnified area. • To further enlarge the image, move the zoom lever toward T.
Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, _ou can display the data code and select the data code combination you wish to display.
i I Press the DATA CODE button. C) The data code will not display the next time you turn on the camcorder. C) Only date and time appear in CARD PLAY mode. Date and time appear for 6 seconds when you begin playback, or to indicate that date or time zone has changed.
End Search When you have played back a tape, you can use this function to locate the end of the last recorded scene. END SEARCH button / i In stop mode, press the END SEARCH button. • "END SEARCH" appears. • The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.
Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set memory _,_ and the tape will stop at that point when you REW _ ............................ H_O N]II._ _:v,._ .................... PLAY rewindlfast forward the tape.
Date Search You can locate the change of the date/time zone with the date search function. This function is operated with the wireless controller. Press the _4 or _ button to begin searching. • Press more than once to search for further date changes (up to 10 times).
Customizing the Camcorder You can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter, operation and self-timer (collectively called the My Camera settings). Changing the My Camera S etti n g s I OPER.
Changing the Display Language The language used for screen display and menu items can be changed. The available set of languages varies depending on the region. Follow the procedure below to check which set of languages are provided with your camcorder.
Other Camcorder Settings | You will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, and unusual conditions of the camcorder. If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off.
Tu[ning Qff _b_ Image S_biJize[ The image stabilizer compensates for camcorder shake even at full telephoto. It tries to compensate for horizontal movements; therefore, you may decide to turn it off when you mount the camcorder on a tripod. °°"° ]L J ([_38) CAMERA SETUP _ IMG STAB((_)).
Recording to a VCR or Digital Video Device _-_ You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality.
C:)When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. O When connecting a digital video device: - If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. - Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal.
Recording from Analog Video Devices (VCR_ TV or Can, corder) You can record videos or TV programs from a YCR or analog camcorder on the tape in | the camcorder. ..................................... .................................... I 1. Connect the carncorder to the analog video device.
Recording from Digital Video Devices (DV Dubbing) You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device (C_ 79).
Converting Analog Signals into Digital Signals (Analog-Digital Converter) | By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog | videotaudio signals to digital signals and output the digital signals via the DV terminal.
vcRsETop3o ] LAv..ov ........ 1 Open the menu and select [VCR SETUP]. Select [AV_ DV], set it to [ON] and close the menu. O Headphones cannot be used during analog-digital conversion. O Depending on the signal sent from the connected device, the conversion from analog to digital signals might not work properly (e.
Audio Dubbing You can add sound from audio devices (AUDIO IN) or with the built-in microphone (MIC.IN). With the ELURA90tELURA85, you can also use an external microphone (MIC.IN). This function is operated with the wireless controller. Canne_ti,ng G Connecting an Audio Device Refer also to the instruction manual of the connected device.
5. Press the AUDIO DUB. button on the wireJess controller. "AUDIO DUB." and "_ ||" appear. 6. Press the PAUSE |m button on the wireless controller to begin dubbing. • Audio device: Begin playback. • Microphone: Speak into the microphone.
:_vinn R:_nk the_ Add__ri .q, nHnd You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. ,00,osE,0P ] L12b t,00,o ,,ERE01 J 1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.
Transferring Video Recordings to a Computer (IEEE1394) You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture board. Use the editing software supplied with your computer/capture board to transfer video recording from tape to computer.
Inserting and Removing a Memory Card You can use ,_*,,_p SD Memory Cards or Terminals commercially available MultiMediaCards with this camcorder. The SD Memory Card has a protect switch to prevent accidental erasure. 1. Turn off the camcorder. 2. Open the cover.
Selecting the Image QualitylSize _banging the StiU image Quality You can choose from Superfine, Fine and Normal. MENU ] ([_38) CARD SETUP _ IMG QUALITY,,FINE Open the menu and select [CARD SETUP]. Select [IMG QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu.
Changing tb_ ...... You can choose between 320 x 240 pixeis and 160 x 120 pixels. :: I I MENU ([_ 38) CARDSETUP ]_ MOVIE SIZE...320x240 Open the menu and select [CARD SETUP]. Select [MOVIE SIZE], set it to [160×120] and close the menu. O Movies are recorded with Motion JPEG compression.
File Numbers Images are automatically assigned file numbers from 0101 to 9900 and stored in folders containing up to 100 images. Folders are assigned numbers from 101 to 998. You can choose to use consecutive file numbers (CONTINUOUS) or to reset the file number each time a different memory card is inserted (RESET).
Recording Still Images on a Memory Card You can record still images with the camcorder, from a tape in the camcorder or from | devices connected via the DV terminal or AV terminal. You can also record a still image on the memory card while you record a movie on the tape.
O Depending on the number of images on the memory card (Windows: more than 1800 images; Macintosh: more than 1000 images), you may not be able to download images to a computer. In such case, use a PC card reader. O Connection to a PictBridge compliant printer will not work when the memory card contains more than 1800 images.
Recording a Still image on a Memory Card While Retarding Mo_ies _n a Tape When you are recording a movie on a tape, you can record the same picture as a still image on the memory card. Select the image quality from normal or fine. I MENU ] ([_38) CAMERA SETUP _ STILL IoREC.
Recording from Qther Device You can record images from devices connected via the AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. For connecting instructions, refer to page 36 and 79. 1. Set the camcorder to PLAY (VCR) mode.
Using the Flash You can use the built-in flash for recording still images in dark places. The flash is equipped with the red-eye reduction mode. PHOTO button ............................... Flash Assist lamp _, (flash) button .........................
1. Press the PHOTO button halfway. _._ F_ • "_" appears in green. • In CAMERA mode, the flash can be used in record pause mode when [STILL I.REC] is set to [_ FINE] or [ _ NORMAL]. 2. Press the PHOTO button fully. The flash fires. _L_ 0 Do not fire the flash close to people's eyes.
Reviewing a Still Image Right after Recording You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been __ recorded. o°.o J (E_ 38) CAMERA SETUP _,_ REVIEW ....... 2sec Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option and close the menu.
Recording Motion JPEG Movies on a Memory Card You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie recorded on a memory card will be monaural.
ScreenDisp|ays during Movie RecQrding @ i| "_" appears and "¢=_" moves to indicate that the camcorder is writing on the memory card. @M :le _rai@:t6 Indicates the recording time of the movie. Indicates the remaining time in hours and minutes.
When recording from a tape in the camcorder or other video devices: O A movie recorded from an image in widescreen mode will be vertically compressed. O The data code of the movie will reflect the date and time it has been recorded on the memory card.
Selecting the Focusing Point The subject you wish to record is not always in the center of the screen. In the Focus- Priority mode, you can choose from one of three focusing points to automatically put the subject you wish into sharp focus.
Selecting the Drive Mode Continuous Shooting High-Speed Continuous Shooting i_ AEB (Auto Exposure Bracketing) Single Captures a quick series of still images while you press the PHOTO button. For the number of frames per second, refer to the following table.
iilZi ¸¸:¸!,::_!, ,!!:: }}}} il { !! i_; ii!!!_!'!!_i _: } I { iZ: ¸¸!::!_ _:: _::! i_:: _ii Press the PHOTO button. Three still images in different exposures are recorded to the memory card. Make sure that there is sufficient space on the memory card.
Recording Panoramic Images (S,i,ch Assis, Mode) You can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer. ........... PHOTO button button 2. Select the direction with the CARD +/- button.
5. Record the second image so that it overlaps a portion of the first image. • Minor discrepancies in the overlapped area can be corrected with the software. • You can retake an image by pressing the CARD +I- button to return to the previous image.
Playing Back a Memory Card You can display a single image, 6 at one time (index screen _109), or one after another (slide show EI_ 109). Use the Card Jump function to quickly locate an image without displaying them one by one (_ 109). CARD +/- button .
ii!:!! :_:::::_! :_:!:!:i ¸ :i iii: ¸ :_:'::: ::!:::!!!::: ::: iiI iii!i ::: !!::: _ i:: ¸¸ ! _!_':!_!! _I 1. Press the SLIDE SHOW button. CARDMIX/ Images are played back one after another. 2. Press the SLIDE SHOW button to stop the slide show.
Protecting Images You can protect important images from accidental erasure when displaying a single image or index screen. If a memory card is formatted, all still images and movies, even protected ones, will be erased permanently. Movies can only be protected when the first scene is displayed as a still image.
Erasing In, ages You can erase images singly or all at once. _L_ Be careful when erasing images. Erased images cannot be recovered. O Protected images cannot be erased. (D Movies can only be erased when the first scene is displayed as a still image. Eras i ng a Sing!e !mage 1.
Combining Images (Card Mix) You can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied DIGITAL VIDEO SOLUTION DISK (such as picture frames, backgrounds and animations) and combine it with the live video recording.
Mix level adjustment: blue area of the card animation image. Live video recording Card mix image SET dial .......... #_Is_TI I I ......... Program selector MENU button ........... RD MIX button CARD + l - button ................. ,,,,,i 1 MENU D.EFFECT SETUP I_ _CARD MIX (_ 38) 1 _ MIX TYPE .
8. To adjust the mix level, select [MiX LEVEL] and adjust it with the SET dial. 9. Close the menu. "CARD MIX" flashes. 10.Press the CARD MiX button. • "CARD MIX" stops flashing. • The combined image appears. O Card mix cannot be used when [STILL I.
_L_ The sample images provided on the supplied DIGITAL VIDEO SOLUTION DISK are intended only for the personal use with this camcorder. Do not use these sample images for other purposes.
Formatting a Memory Card Format new memory cards, or when you get the message "CARD ERROR". You can also format a memory card to erase all data recorded on it. O Formatting a memory card erases all data, including protected images. C) Images erased by formatting cannot be recovered.
Creating a Start-up Image You can create a start-up image using a still image on the memory card. | M_NU MY CAMERA ]_) CREATE START-UP IMAGE (CZ] 38) J 1. Select a still image with the CARD +/- buttons. 2. Open the menu and select [MY CAMERA]. 3. Select [CREATE START-UP iMAGE].
Printing Still Images You can print still images by connecting the camcorder to a printer with direct print function. You can also use the print order settings for direct printing (_ 127).
O If _ continues to flash (for more than 1 minute) or if _, _ or does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the cable from camcorder and printer, turn off camcorder and printer, turn both back on and reconnect the camcorder to the printer.
3. Turn the SET dial to select [PRINT] and press the SET dial. • Printing starts. The print setting menu disappears when printing is complete. • If you wish to continue printing, select another still image with the CARD +I- button. O Observe the following precautions during printing, otherwise printing may not be performed correctly.
Selecting the Print Settings The procedure for selecting the number of copies is common to all printers. Other print setting procedures vary depending on your printer model. Check which icon appears in the upper left corner of the camcorder screen after connecting, and refer to the relevant pages accordingly.
Paper Settings 1. in the print setting menu, turn the SET dial to select [PAPER] and press the SET dial. 2. Turn the SET dial to select the paper size and press the SET dial. Select the paper size of the paper set in your printer. 3. Turn the SET dial to select the paper type and press the SET dial.
Setting the Print Effect (image Optimize) This function uses the camcorder's recording information to optimize the image data, yielding high quality prints. 1. In the print setting menu, turn the SET dial to select (print effect) and press the SET dial.
3. Turn the SET dial to select the paper size and press the SET dial. • Select the paper size of the paper set in your printer. • Pressing the MENU button brings you back to the print settings menu. 4. Turn the SET dial to select _ (BORDERS) and press the SET dial.
Selecting the Imaqe Style 2. Make sure that _ (IMAGE) is selected and press the SET dial. 3. Turn the SET dial to select the image style and press the SET dial. Pressing the MENU button brings you back to the print settings menu. Selecting the Borders 2.
Trimming Settings Set the print style before you start with the trimming settings. 1. In the print setting menu, turn the SET dial to select [TRIMMING] and press the SET dial. The trimming frame appears. 2. Change the size of the trimming flame. • Move the zoom lever toward T to shrink the frame, and toward W to enlarge the frame.
Printing with Print Order Settings You can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF compatible printers (_ 118).
Erasing All Print Orders I °°"° 1[ (_38) CARD OPERATIONS F_ [_PRINT ORDERS ALL ERASE I. Open the menu and select [CARD OPERATIONS]. 2. Select [_PRINT ORDERS ALL ERASE]. "ERASE ALL _ PRINT ORDERS?", [NO] and [YES] appears. 3. Select [YES].
Transferring Memory Card Images to a Computer With the supplied USB cable and Digital Video Software, you can browse and archive | images or arrange still images for printout.
Direct Transfer Iw ndows os onmy 1 You can transfer images to the computer with the _ _v (print/share) button. ALL iMAGES... Transfers all images to the computer. '_,_ NEW iMAGES... Transfers only those images that have not yet been transferred to the computer.
Transferring All images, New images or images with !ransfer Qrder_ .......... To transfer images with transfer order, you need to set the transfer orders ([::_ 133). 1. Turn the SET dial to select [E:_ALL IMAGES], [ _,._._ NEW IMAGES] or [_TRANSFER ORDERS].
_L_ o Do not change the operating mode while the camcorder is connected to a computer. O Only JPEG compressed still images and Motion JPEG compressed movies can be transferred. O You can press the SET dial in place of the _ N button. With [F_,ALL IMAGES], [&£_ NEW IMAGES] or [_TRANSFER ORDERS], a confirmation message appears.
Selecting Images for Transfer (Transfer Order) You can select images for transfer to the computer. These transfer settings are compatible with the Digital Print Order Format (DPOF) standards. A maximum of 200 images can be selected. Do not connect a USB or DV cable to the camcorder while setting the transfer orders.
About the NETWORK Mode (DV Messenger Version2) With the Windows XP dedicated DV Network Software (DV Messenger), you can operate your camcorder from the computer, perform videoconferences using the camcorder or remotely access the camcorder at home using the Internet.
Screen Displays Nidingth_DisplaysQn_b_L_DS_en , _ [-_ You can hide the displays on the LCD screen to have a clear screen for playback. 3 MENU DISPLAY SETUP/_ _ DISPLAYS ..... ON ([_] 38) J Open the menu and select [DISPLAY SETUP/_)]. Select [DISPLAYS], set it to [OFF <PLAYBK>] and close the menu.
Screen Disp!ays duEing RecordingL_!ayback @ @@@®@@ _1_Program AE (C[3 46) (_ Exposure (C_[3 52) Shutter speed (C_57) (4_ Manual focus (C[_J 53) (_) White balance (_ 55) Card mix ([_ 112) Digital effects ([_ 63) (_) Date and time (_ 22) * ELURA90/ELURA85 only.
CARD CAMERA Mode (see also _ 101) • .... ==.,. .... • ...... _ ............. ,==_,=,, ...... °.._==_•. ..... • ..... _,=,,.,=° ...... _ Focusing frame (C[3 103) (_ Flash* (1213 97) _Camcorder shake warning (_ 58) Drive mode ( _ 104) ® * ELURA90/ELURA85 only.
List of Messages Message Explanation SET THE TIME ZONE, You have not set the time zone, date and time. This message 22 DATE AND TIME appears each time you turn the power on until you set the time zone, date and time. CHANGE THE BATTERY Battery pack is exhausted.
Message Explanation UNIDENTIFIABLE Image is not recorded with JPEG compression, or with a - IMAGE compression not compatible with the camcorder, or the image file is corrupted.
Message Explanation COULD NOT PRINT X You attempted to use the print order settings to print X images that were IMAGES recorded with another camcorder, with a different compression or were edited on a computer. SET _] PRINT ORDER You attempted to print an image from the CARD PLAY menu [_ _ PRINT] without having set the print order.
MaintenancelOthers O Do not carry the camcorder by the LCD panel or viewfinder. O Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car, and high humidity. O Do not use the camcorder near strong electric or magnetic fields such as above TVs, near plasma TVs or mobile phones.
Video Heads O When the message "HEADS DIRTY, USE CLEANING CASSETTE" appears, or when the playback picture becomes distorted, the video heads need to be cleaned, O To maintain the best pictur.
Resuming use: O It takes about 1 hour until the water droplets evaporate. After the condensation warning stops flashing, wait for 1 more hour before resuming use. Battery Pack Hand!ing PrecautiQns ......................................................
144 L it h i u m B u tie n B atte ry H a n d ! i n g R re c a u tio n s WARNING! • The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100 °C (212 °F) or incinerate the battery.
M_mo_ Card Ha_d!ing_ecau_iQns O Format new memory cards with the camcorder. Memory cards formatted with other devices such as a computer may not operate correctly. O We recommend saving backups of memory card images on your computer's hard drive | or other external memory device.
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Camcorder will not turn on. The camcorder switches off by itself. Cassette compartment will not open.
Recording Problem "_ ' flashes red on the screen. Image will not appear on the screen. "SET THE TIME ZONE, DATE AND TIME' appears on the screen. Pressing the start/stop button will not start recording. Camcorder will not focus. A vertical light bar appears on the screen.
Playback Problem Pressing the playback button does not start playback. Image will not appear on the TV screen. Tape is running, but image will not appear on the TV screen. No sound from the built-in speakeE Noise comes outofthe headphones. Cause Camcorder is turned off, or is not set to PLAY (VCR) mode.
Memory Card Operation Problem Cause Memory card cannot be Memory card was not facing inserted, the correct direction. Memory card cannot be Memory card is full. recorded. Memory card cannot be played back. Image cannot be erased. Memory card is not formatted.
System Diagram (Availability differs from area to area) WS-20 Wrist Strap WA-34 Wide Attachment WD*H34 Wide-converter TL*H34 Tele-converter O0 FS*34U Filter Set SS-900 Shoulder Strap MiniDV Video Cass.
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.
TL-H34 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance with the TL-H34 is 2.
SC-1000/SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. SC=A50 Soft Carrying Case This lightweight bag keeps the camcorder within easy reach without weighing you down or getting in the way.
Specifications ELU RAgO/ELU !851ELU _80 System Video Recording System 2 rotary heads, heticat scanning DV system (consumer digital VCR SD system), digital component recording Audio Recording System PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch) Television System EIA standard (525 lines, 60 fields) NTSC color signal Image Sensor 1/4.
Input/Output Terminals AV Terminal 03.5 mm minijack Video: 1 Vp-p/75 ohms unbalanced Audio output: -10 dBV (47 kohm toad)/3 kohms or tess Audio input: -10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) MID Terminal 93.
Item Codes Provided Accessories Lens Cap CA-570 Compact Power Adapter NB-2LH Battery Pack STV-250N Stereo Video Cable SS-900 Shoulder Strap WL-D85 Wireless Controller IFC-300PCU USB Cable WA-34 Wide A.
Index 12bit audio ...................... 87 16:9 widescreen .................. 68 6-second auto date ............... 71 n Abroad, using the camcorder ....... 145 Accessories .................. 8, 151 AF-assist lamp ................... 98 Analog line-in .
158 MIC terminal ..................... 62 Microphone ..................... 62 Mini video light ................... 49 Movie size ...................... 91 Multi-image screen ................ 64 MultiMediaCard .................. 89 My Camera settings .
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY | FOR THE UNITED STATES The warranty set forward below is given by Canon USA., tnc. with respect to equipment purchased in the United States. The limited warranty is onty effective upon presentation of your Bill of Sate or other proof of purchase.
ICANADAI CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. ('*Canon Canada") with respect to Canon digital video equipment purchased in Canada.
An important point after buying a device Canon LU_A 80 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon LU_A 80 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon LU_A 80 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon LU_A 80 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon LU_A 80 will certainly help you make a decision on the purchase.
If you already are a holder of Canon LU_A 80, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon LU_A 80.
However, one of the most important roles played by the user manual is to help in solving problems with Canon LU_A 80. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon LU_A 80 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
