Instruction/ maintenance manual of the product 2460 D AEG
Go to page of 18
2460 D/2490 D Dunstabzugshaube Afzuigkap Hotte aspirante Cooker Hood Montage- und Gebrauchsanweisung Installatie- en gebruiksaanwijzing Manuel de montage et d’utilisation Operating and Installation .
48 Contents Safety warnings 49 for user 49 for kitchen unit installer 49 Introduction 51 Extractor version 51 Filter V ersion 51 Bedienung der Dunsthaube 52 Maintenance and care 53 Metal grease filter.
49 Safety warnings for user • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames. • Also, when frying, keep the deep frying pan on the cooker top/ cooker under careful control.
50 • It is advisable to apply for authorization from the relevant controlling authority when connecting the outlet to an unused chimney flue or combustion gas duct. The air outlet installation must comply with the regulations laid down by the relevant authorities.
51 Introduction Extractor version • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one activated carbon filter (special accessory). • Y ou will need original AEG carbon filter for this function (see Special Accessories).
52 Fig. 2 Bedienung der Dunsthaube • The hood is fitted with one motor having several speed. Turn the hood on a few minutes before you start cooking then you will get an underpressure in the kitchen. It should be left on after cooking for about 15 minutes or until all odours have disappeared.
53 Maintenance and care • The hood must always be disconnected from the mains power supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in the external evacuation or internal recycling function.
54 Carbon filter • The carbon filter should only be used if you want to use the hood in its filtering function. • T o do this you will need an original AEG activated carbon filter (see special accessories). • Cleaning/replacing the carbon filter Unlike other carbon filters, the LONGLIFE carbon filter can be cleaned and reactivated.
55 Fig. 5 W arning • Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. Y ou are therefore strongly recommended to follow these instructions.
56 Cleaning • W arning: always disconnect the hood from the mains power supply before cleaning it. Never insert pointed objects in the motor ’ s protective grid. • W ash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.
57 Guarantee conditions Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser , which must be verified by purchase invoice or similar documentation.
58 Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home.They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances.
59 T echnic Details Models 2490 D 2460 D Dimensions - extractor ver (in cm): Height 68-1 13 68-1 13 Width 89 ,8 59 ,8 Depht 45 45 Dimensions - filter version (in cm): Height 67,5-122,5 67,5-122,5 Widt.
60 Electrical connection Safety warnings for the electrician Before connecting the appliance to the power supply , check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access.
61 W all unit mounting - Fig. 6 • Only for extractor version: position the upper section of the chimney so that the oulet slots H are not visible (see also A-B-C sequence on on Fig. 6 ). • Fix each other both parts of the hood (1) , make all connections between the two parts (2) and fix with 6 screws (3) .
62 20b 20b 7-16 7-16 4 5 6 12 13 8 9 14 14 15 18 20a 20a 9 8 19 8 9 1 17 2 B G H 11 11 10 1 1 1 1 3 3 3 3 21 22 F 17 12 13 10 22 Fig. 6 A-B-C, Extractor version only!.
.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://ww w .aeg.hausgeraete.de © Copyright by AEG LI1 LNC Ed. 09/01.
An important point after buying a device AEG 2460 D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 2460 D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 2460 D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 2460 D you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 2460 D will certainly help you make a decision on the purchase.
If you already are a holder of AEG 2460 D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 2460 D.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 2460 D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 2460 D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
