Instruction/ maintenance manual of the product IR3300 Canon
Go to page of 724
FY8-13H8-000 MAR. 2001 iR2200/iR2800/ iR3300 REVISION 0 COPYRIGHT © 2001 CANON IN C . CANON iR2200/iR2800/iR3300 RE V .0 MAR. 2001 PRINTED IN U.S.A..
Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory , installation, maintenance, and repair of products. This manual co vers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 INTRODUCTION i Indicates an item of a non-specific nature, possibly classif ied as Note, Caution, or W a rning.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 INTRODUCTION ii 2 Outline of the Manual This Service Manual contains basic information needed to service the iR2200/iR2800/ iR3300 and its accessories (i.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 INTRODUCTION iii Chapter 6 Fixing System: principles of operation of the fixing system, timing of operatio.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 INTRODUCTION iv The following rules apply throughout this Service Manual: 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 SYSTEM UNIT.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS S1 Contents CHAPTER 1 GENERAL DESCRIPTION 1 Basic Construction ......................... 2-1S 1.1 Functional Construction .......... 2-1S 1.2 Outline of the Electrical Circuitry .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS S2 4.4.1 Shift from Standby Mode to Sleep Mode 1 ................... 2-1 6S 4.4.2 Shift from Sleep Mode 1 to Standby Mode .................. 2-16S 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-1 S 1 Specifications 1.1 Main Body 1.1.1 T ype Item Description Body Desk top Copyboard Fix ed Light source Xenon lamp Lens Lens a rray Photosensitiv e medium OPC drum (30-mm dia.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-2 S 1.1.3 Functions Item Description Resolution Reading 600dpi×600dpi Copying 1200dpi×600dpi Printer output 2400dpi×600dpi Original type Sheet, book 3-D object (2 kg max.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-3 S Item Description Single-sided copying mode • Plain paper (64 to 80 g/m 2 ):A3, B4, A4, B5, A5R, A4R, B5R, A5, 279.4×431.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-4 S Item Description Cassette Capacity 55 mm deep (approx.; about 500 sheets of 80 g/m 2 paper) Hard disk 6GB Non-image width Leading edge Direct, Enlarge/Reduce:4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-5 S 1.1.4 Others Item Description Operating environment T emperature range 15° to 30°C/59 to 86°F Humidity range 5 to 80% Atmospheric pressure 810.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-6 S Reproduction mode Side Paper size copies /min (1-to-N) iR2200 iR2800 i.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-7 S Reproduction mode Size (1toN) iR2200 iR2800 iR3300 Direct 279.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-8 S 1.2 Side P aper Deck-L1 Item Description Pickup method Retard Paper ac.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-9 S 2 Names of P ar ts 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-10 S [1] Cop yboard glass [2] D ADF reading glass [3] Left cov er [4] Left.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-11 S 2.2 Cross Section F01-202-01 [1] [5] [7] [9] [11] [12] [8] [10] [27] .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-12 S [1] D ADF reading glass [2] No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-13 S 3 System Configuration 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-14 S 3.2 Outline of the Electrical Circuitr y 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-15 S 3.3 Inputs to and Outputs from the Major PCBs 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-16 S 3.4 Configuration with Accessories 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 GENERAL DESCRIPTION 1-17 S 3.4.2 Accessor y Boards F01-304-02 Network Multi-PDL Printer Kit-C1 N.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTR OLLER.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-1 S 1 Basic Constr uction 1.1 Functional Constr uction The machine may broadly.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-2 S 1.2 Outline of the Electrical Circuitr y 1.2.1 Outline The major electrical mechanisms of the controller block are controlled by the CPU on the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-3 S F02-102-01 Main controller PCB Printer unit Reader unit Control panel CPU .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-4 S 1.3 Star t-Up Sequence 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-5 S 1.3.2 Star t-Up Sequence When the main po wer switch is tuned on, the CPU on the main controller CPU ex ecutes the self-diagnostic program stored in the boot R OM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-6 S When the self-diagnostic program ends normally , the boot program also stored in the boot R OM will start up. The boot program reads the system software from the HDD into the sys- tem area of the SDRAM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-7 S 2 Digital Image Processing 2.1 Outline The machine’ s digital image processing and image memory are controlled by the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-8 S 2.2 Input Image Processing The image data from the reader unit is processed for the following: 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-9 S 2.2.6 Binar y Processing (error diffusion method T -BIC) In the error diff.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-10 S 2.4 Output Image Processing The output image data to the printer unit is subjected to the following processing: 2.4.1 Smoothing a.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-11 S 3 Soft Counters The machine is equipped with soft counters that count the number of prints it has handled; the counter readings may be checked by pressing the Check ke y in the control panel.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-12 S The follo wing diagrams show the locations of the sensor in the f inisher.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-13 S The counters possess a total of 16 modes, consisting of eight modes for l.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-14 S OPTION>USER>COUNTER1 Use it to enable/disable the display of soft counter 1 in the control panel.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-15 S 4 Controlling the P o w er Supply 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-16 S 4.4.1 Shift from Standby Mode to Sleep Mode 1 A shift from standby mode to sleep mode 1 is ex ecuted for the following: • The po wer switch (soft switch) in the control panel is OFF .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-17 S 4.5 Sleep Mode 2 In sleep mode 2, only the +3.3V all-night (3.3 VB) power supply is ON. The CPU on the main control paper remains in wait for an interrupt (ke eping the program at rest) to limit the consumption of pow er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-18 S 5 Ne w Functions 5.1 Hard Disk Spool In hard disk spool, print data is no.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-19 S 5.2 SMB Printing SMB has been dev eloped so as to use NetBIOS, which specifies an address by means of a computer name, for use solely with a specific protocol.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 MAIN CONTROLLER 2-20 S 5.3 LPD Banner When OPD printing is selected, the following job inform ation will be printed: LPD Banner (sample) iR2200-3300 (iN-E2) USER N AME : ts HOST N AME : canon JOB N AME : golfer .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-1 S 1 Selecting the Site of Installation Select the site of installation against the following conditions; if possibl e, visit the user’ s in advance of the deli very of the machine: 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-2 S 6. The site must be such that the machine will be at least 10 cm away from an y wall, allo w- ing adequate space for work. F03-100-01 F03-100-02 7.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-3 S 2 Unpac king and Installation 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-4 S 2.2 Unpacking and Remo ving the Fixing Materials W ork Checks/remarks 1) Open the shipping box, and remov e the plastic sheets.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-5 S W ork Checks/remarks 3) Remov e the packing tape of the ma- chine. 4) Press the cassette release button, and take out each cassette to the front.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-6 S 2.3 Mounting the Scanner W ork Checks/remarks 1) Remov e the scre w [1] and the tag [2] used to hold the scanner in place on the left cov er of the reader unit.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-7 S W ork Checks/remarks 4) Remov e the fixing scre w [1] from the dummy drum. • The remov ed f ixing scre w will be used when mounting the drum unit.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-8 S W ork Checks/remarks 2) Shake the toner cartridge [1] se veral items. 3) Set the toner cartridge to the dev eloping assembly , and push it down until the opening tab [2] springs to view .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-9 S W ork Checks/remarks 6) Push in the black cov er of the dev elop- ing assembly back to its initial position. • The toner cartridge will become disen- gaged.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-10 S 2.6 Mounting the Dr um Unit W ork Checks/remarks 1) Unpack the drum unit, and remov e the two releasing members [1] of the pri- mary charging roller .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-11 S W ork Checks/remarks 3) Using the fixing scre w [1] removed from the dummy drum previously , se- cure the dump unit [2] in place.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-12 S 2.7 Stirr ing the T oner W ork Checks/remarks 1) Connect the power plug to the po wer outlet. 2) T urn on the main power switch.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-13 S 2.8 Setting the Cassette W ork Checks/remarks 1) Press the cassette releasing button, and slide out the cassette to the front.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-14 S W ork Checks/remarks 3) Pick the lev er of the side guide plate and the rear guide plate, and adjust it to the appropriate paper size index.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-15 S W ork Checks/remarks 5) Attach the size label [2] to the cassete size plate [1], and fit the cassette size plate to each cassette.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-16 S 2.9 Checking the Images/Operations W ork Checks/remarks 1) T o install the machine not using the 2- cassette pedestal, mount the right lower cov er [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-17 S W ork Checks/remarks 5) If necessary in vie w of the site en viron- ment, turn on the cassette heater switch [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-18 S 2.10 Connecting to the Network Perform the following steps if the machine is equipped with printer func- tions: 1) T urn off the main power .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-19 S 2.11.2 Making a Check Using a Remote Host Address The connection to the network may be checked by e xecuting PING using a remote host address (i.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-20 S 2.12.2 Making a Check Using a Loop-Back Address A loop-back address is returned before it reaches the network PCB; therefore, ex ecuting PING using it will enable a check on the TCP/IP settings made on the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-21 S 3 Relocating the Machine 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-22 S 3.2 Lifting the Machine Off the P edestal W ork Checks/remarks 1) Disconnect the lattice connector of the pedestal from the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-23 S 4 Installing the Card Reader-C1 W ork Checks/remarks 1) Make the follo wing selections in service mode: COPIER>FUNCTION>INST ALL>CARD; then, enter the card number (1 through 2701).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-24 S W ork Checks/remarks 6) Cut off the f ace plate [1] at the top of the right rear cov er with a nipper or the like. 7) Lead out the connector [1] of the card reader on the machine side, and mount the right rear cover .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-25 S W ork Checks/remarks 9) While pushing in the connector [1] and the harness.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-26 S 5 Installing the Document T ra y-D2 W ork Checks/remarks 1) Remove the two stickers from the right top of the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-27 S 6 Replacing the Drum Unit W ork Checks/remarks 1) T urn off the main po wer switch; then, open the front cov er . 2) Shift the feeding assembly releasing le- ver to free the feeding assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-28 S W ork Checks/remarks 7) Check to see the dev eloping assembly is freed; then, slide in the new drum unit along the rails in the machine slowly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-29 S W ork Checks/remarks 9) Fill out the date label, and attach it to the front cov er of the drum unit. 10) T urn the developing assembly locking lev er clockwise to lock it in place.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 INST ALLA TION 3-30 S W ork Checks/remarks 17) Start service move. 18) Make the follo wing selections: COPIER>FUNCTION>DPC>D- GAMMA. 19) Press the OK key .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 READER UNIT.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS R1 Contents CHAPTER 1 BASIC OPERA TION CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 1 Outline of Electrical Circuitry ....... 1-1R 1.1 Outline ...............
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS R2 CHAPTER 3 IMA GE PROCESSING SYSTEM 5.3 Sensors .................................. 2-24R 5.3.1 Removing the Original Detec- tion Unit ............
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 BASIC OPERA TION.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 BASIC OPERA TION 1-1 R CCD PCB ADF Scanner motor Reader controller PCB Controller unit Printer u.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 BASIC OPERA TION 1-2 R 2 Basic Sequence of Operations 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 BASIC OPERA TION 1-3 R 3 Inputs to and Outputs from the Major PCBs 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-1 R Item Scanning lamp Original Scanning Scanner position detection Reproduction ratio (zoom) Scanner dri ve control Lens Scanning lamp acti va tion Original size detection 1 Outline of Operations 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-2 R Copyboard glass Original Scanning lamp Lens CCD No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-3 R 1.2 Sequence of Operations (original exposure) 1.2.1 Book Mode, 1 Or iginal, Copyboard Closed *1: original size detection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-4 R 1.2.2 Book Mode, 1 Or iginal, Copyboard Co v er Open *1: original size detection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-5 R 1.3 Enlargement/Reduction (zoom) [1] When the copyboard cover is used, the ra tio may be between 25% and 800% and the speed of the scanner is controlled.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-6 R 2 Scanner Dr iv e System 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-7 R 2.2 Controlling the Scanner Motor The system used to control the .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-8 R Vertical size plate Standard white plate Increase Decrease Copyboard glass Vertical size plate Standard white plate Increase Decrease Copyboard glass Shading position F02-202-04 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-9 R 3 Controlling the Scanning Lamp (LA2) 3.1 Outline The system used to control the scanning lamp is constructed as follo ws and the items of control include the following: [1] T urning on and of f the scanning lamp.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-10 R 3.4 Detecting an Error The reader controller circuit generates the error signal (INV_ERR) in response to an error (e.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-11 R 4 Detecting the Size of Originals 4.1 Outline The machine automatically identifies the size of originals based on the combination of in- tensities measured by reflection type sensors and CCD at specific points.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-12 R F02-404-01 P oint of original detection Copyboard glass Xenon la.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-13 R Originals size A3 B4 A4R A4 B5 B5R None Original senso r P oint .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-14 R Originals size A3 B4 A4R A4 B5 B5R None Original sensor P oint o.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-15 R 5 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and how to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-16 R 5.1 Exposure Lamp 5.1.1 Removing the Exposure Lamp • Do not start to w ork if the lamp is hot. • Do not lea v e fingerprints on the surface of the lamp.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-17 R 6) Disconnect the connector [1]. 7) Remov e the screw [2], and detach the cable f ixing plate [3]. F02-501-03 8) Push the No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-18 R 5.2 Scanner Dr ive Assemb ly 5.2.1 Removing the Scanner Motor 1) Remov e the copyboard glass. (p. 3-11R) 2) Disconnect the connector [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-19 R 5.2.2 Mounting the Motor Unit 1) Engage the pulley [2] of the motor unit [1] with the belt [3]. 2) Using two scre ws [4], mount the motor unit [1] temporarily .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-20 R 5.2.3 Removing the Scanner Dr ive Cab le When replacing the cable, be sure to obtain the follo wing: • Mirror positioning tool (FY9-3009) 1) Remo ve the reader upper fram e.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-21 R 5.2.4 Routing the Scanner Dr ive Cab le Route the scanner cable as follows to the pulle ys and the hook mirror base: 1) Loosen the scre w on the cable fixing plate.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-22 R 5.2.5 Adjusting the P osition of the No .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-23 R 2) Fit the pins of the mirror positioning tool (front [2], rear [3]) into the holes [1] of the rail and the No. 1/No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-24 R 5.3 Sensors 5.3.1 Removing the Or iginal Detection Unit 1) Remov e the copyboard glass. (p. 3-11R) 2) Remove the tw o scre ws [1], and detach the motor shield plate [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-25 R 4) Disconnect the connector [1], and de- tach the HP sensor [2] from the sensor mounting plate. F02-503-04 5.3.3 Removing the Or iginal Cov er Sensor 1) Remov e the reader rear cover (5 scre ws).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 ORIGINAL EXPOSURE SYSTEM 2-26 R 5.4 PCBs 5.4.1 Removing the Inv er ter PCB 1) Remove the reader rear co ver (5 scre ws). 2) Remove the scre w [1], and detach the connector cov er [2] found at the rear .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-1 R 1 Outline The major functions of the image processing system are as follo ws: [1] CCD (image sensor) Number of lines: 1 Number of pixels: 7450 Size of pixel: 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-2 R 2 Analog Image Processing 2.1 Outline Analog image processing is performed by the CCD PCB and the reader controller PCB, which has the follo wing major functions: [1] Dri ves the CCD.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-3 R 2.3 Gain Correction and Offset Correction of the CCD Output T o c.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-4 R 3 Digital Image Processing 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-5 R 3.2.2 Shading Adjustment In this adjustment, the density of white paper and that of the standard white plate are mea- sured, and the results are stored in memory .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-6 R 3.2.4 Edge Gain Correction (ADF in use) In stream reading with the ADF in use, the No. 1 mirror base is fixed in position.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-7 R 3.3 A uto Density Adjustment (AE) 3.3.1 Outline As in the case of a ne wspaper , some originals have a dark background.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-8 R 3.4 Related Ser vice Mode COPIER>FUNCTION>CCD>CCD-ADJ (shading auto adjustment) Execute the mode after replacing the CCD unit, scanning lamp, reader con- troller PCB, or standard white plate.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-9 R 4 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and how to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-10 R 4.1 Exter nal Covers 4.1.1 Exter nal Covers Remove the co ve rs as follows when cleaning, checking, or repairing the inside of the machine: REF .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-11 R 4.1.3 Removing the Copyboard Glass 1) Remov e the reader right cove r . (See item 4.1.2.) 2) Remov e the copyboard glass [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-12 R 4.2 CCDs 4.2.1 Removing the CCD Unit 1) Remov e the original detection unit. (p. 2-24R) 2) Remov e the four scre ws [1], and dis- connect the connector [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-13 R 4.2.2 P oints to Note When Replacing the CCD Unit Execute ‘CCD.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-14 R 4.3 F rames 4.3.1 Removing the Left ADF Base Unit 1) Remove the reader rear co ver (5 scre ws) and the left support cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-15 R 4.3.3 Mounting the Reader Upper F rame 1) Fit the eight claws [2] of the reader frame [1] (circled) into the cut-offs [4] in the reader upper frame [3]; take care so that the engagement is secure.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 IMA GE PROCESSING SYSTEM 3-16 R 4.4 PCBs 4.4.1 Removing the Reader Controller PCB See the descriptions for the printer unit.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 PRINTER UNIT.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P1 Contents CHAPTER 1 INTR ODUCTION CHAPTER 2 SEQUENCE OF OPERA TIONS 1 Safety .............................................. 1-1P 1.1 Safety of Laser Light .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P2 2.2.2 A C Bias .............................. 4-5P 2.3 Controlling the Current V oltage/ Current to a Specific Le ve l ...... 4-5P 2.3.1 Controlling the DC Bias to a Specifi c Le ve l .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P3 9.5.7 Positioning the Dev eloping As- sembly Magnetic Seal ...... 4 -38 P 9.5.8 Mounting the Dev eloping As- sembly Blade ................... 4-38P 9.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P4 7 Double-Sided Printing ................. 5-3 0P 7.1 Through-Pa th Operation ........ 5-30 P 7.2 Outline of Operations ............ 5-3 1P 7.3 Detecting the Horizontal Registra- tion Position .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P5 CHAPTER 7 EXTERNALS AND CONTROLS 1 Control Panel .................................. 7-1P 1.1 Outline ..................................... 7-1P 2 Fans .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P6 CHAPTER 8 P APER DECK-L1 1.1 Pickup ...................................... 8-1P 1.1.1 Outline ............................... 8-1P 1.1.2 Pickup Operation .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P7 CHAPTER 9 CASSETTE FEEDING UNIT -W1 1 Outline ............................................ 9-1P 1.1 Specifications and Construction .............
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS P8 CHAPTER 10 INNER 2W A Y TRA Y -A1 1 Specific ations ............................... 10-1P 1.1 T ype ........................................ 10- 1P 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTR ODUCTION.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-1 P 1 Saf ety 1.1 Saf ety of Laser Light Laser light can prov e to be harmful to the human body .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-2 P F01-102-01 CDRH Label The description may va ry from model to model.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-3 P 1.3 Handling the Laser System Y ou must take e xtra care when servicing the area around the machine’ s laser system, as by not bringing a high-reflectance screwdri ver into the laser path.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-4 P 1.4 Saf ety of T oner The machine’ s toner is a non-toxic product consisting of plastic, iron, and small amounts of dyes.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-5 P 2 Image F or mation System 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 INTRODUCTION 1-6 P The machine’ s image formation process consists of the following eight step.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-1 P 1 Basic Operations 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-2 P 1.2 Outline f or the Electr ical Circuitr y 1.2.1 Outline The major electrical mechanisms of the printer unit are controlled by the CPU on the DC controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-3 P 1.3 Basic Sequence of Operations 1.3.1 Basic Sequence of Operations at P ow er-On • If the reading of the main thermistor (TH1) is less than 100°C • If the reading of the main thermistor (TH1) is 100°C or more.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-4 P Interval Description WUP1 (warm-up 1) Supplies power to the heater at 65% for a specific period of time (400 msec).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-5 P 1.4 Controlling the Main Motor (M2) 1.4.1 Outline The functions of the main motor control circuit are as sho wn in T02-104-01; for a block diagram of the circuit, see F02-104-01.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 SEQUENCE OF OPERA TIONS 2-6 P 1.5 Inputs to and Outputs from the Major PCBs 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-1 P 1 Outline of Operations 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-2 P F03-101-01 shows the major components for the laser e xposure system.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-3 P 1.2 Sequence of Operations (laser e xposure system) F03-102-01 2 Generating Sync Signals 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-4 P 2.2 Flow of Sync signals [1] The BD signal goes ‘0’ when laser light is detected. [2] The phase is matched with the phase of the printer, and a sync signal is genera ted.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-5 P 3 Laser Dr iv er Circuit 3.1 Controlling the Laser Unit The laser dri ver circuit is used to dri v e the semiconductor laser according to the laser dri ve signal from the DC controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-6 P F03-301-01 REF . The laser power of the laser unit is adjusted at the f actory , and it must not be adjusted in the field.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-7 P 4 Controlling the Laser Scanner Motor 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-8 P 5 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 LASER EXPOSURE SYSTEM 3-9 P 5.1 Laser Scanner Assembly 5.1.1 Removing the Laser Unit 1) Remov e the deli very tray . (p. 7-13P) 2) Open the harness guide [1], and discon- nect the two connectors [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMA GE FORMA TION SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-1 P 1 Outline of Processes 1.1 Outline T04-101-01 shows the functions of and the methods used in the image form ation system: Item Description Photosensitiv e dr um OPC (30-mm dia.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-2 P F04-101-01 shows the major components of the image form ation syst.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-3 P 1.2 Basic Sequence of Operations (image f or mation system) • 1 .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-4 P 2 Controlling the Pr imar y Charging Roller Bias 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-5 P 2.2 T ur ning On/Off the Bias The primary charging roller bias is turned on/of f as follows: 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-6 P 2.4 T emperature Correction of the DC Bias When the temperature inside the machine increases, the resistance of the photosensitiv e drum will decrease, thereby lowering the char ging characteristics.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-7 P 2.6 Controlling the Detection of the Photosensitiv e Drum Re- sist.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-8 P E064 Indicates the presence of a high-voltage (primary char ging, transfer charg- ing, dev eloping) output fault. COPIER>DISPLA Y>HV -STS>PRIMAR Y Use it to indicate the current lev el of primary charging.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-9 P 3 Controlling the T ransf er Charging Roller Bias 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-10 P 3.2 T ur ning On/Off the Bias The transfer charging roller bias i.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-11 P 3.4 Controlling the Output b y Operating Mode 3.4.1 T ypes of Modes The transfer charging output may be an y of the following output modes, and the output is va ried to suit each mode.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-12 P F04-304-01 3.4.2 T ur ning On/Off the Cleaning Bias When the clea.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-13 P 3.5 Controlling the Output The output of the DC bias applied to t.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-14 P 4 Controlling the Separation Static Eliminator Bias 4.1 Outline P ar t 2>Chapter 5>8.3 “Static Eliminator Separation Method” The machine uses a static eliminator for separation.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-15 P 4.2 T ur ning On/Off the Bias The separation static eliminator bi.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-16 P 5 Controlling the T ransf er Guide Bias 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-17 P 6 Primar y Charging Roller Cleaning Mechanism 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-18 P 7 De veloping Assemb ly 7.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-19 P 7.2 Controlling the De v eloping Bias 7.2.1 Outline Both DC bias and A C bias are applied to the de veloping c ylinder .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-20 P 7.2.2 Controlling the DC Dev eloping Bias [1] When the DC bias ON.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-21 P 7.3 Detecting the Le v el of T oner A toner sensor (S1) of a piezoelectric oscillation type is mounted inside the dev eloping assembly for detection of the lev el of toner .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-22 P 8 Dr um Cleaner 8.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-23 P F04-801-02 M1 Main motor W aste toner case W aste toner case full.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-24 P 8.2 Monitor ing the W aste T oner Case The machine checks the waste toner case in reference to two le vels.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-25 P E019 Indicates that the waste toner case is full. Memo The waste toner case can hold waste toner equi valent of about 200,000 prints.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-26 P 9 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-27 P 9.1 Pre-Exposure Lamp Unit 9.1.1 Removing the Pre-Exposure Lamp Unit 1) Remov e the drum unit. (p. 4-28P) -2) Remove the inside cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-28 P 9.2 Photosensitiv e Drum 9.2.1 Removing the Dr um Unit 1) Open the front cov er . 2) Release the feeding assembly . 3) Release the dev eloping assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-29 P 9.2.2 Cleaning the Photosensitive Drum If the surface of the photosensiti ve dru m is soiled, wipe it with a flannel cloth coated with toner .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-30 P 9.3 T ransf er Charging Roller 9.3.1 Removing the T ransf er Charging Roller Do not touch the surface of the transfer charging roller; other - wise, faulty images can occur .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-31 P 9.4 Charging Roller Solenoid 9.4.1 Removing the Charging Roller Solenoid (SL6) 1) Remov e the photosensitiv e drum unit.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-32 P 7) Free the claw , and detach the two relay PCBs [1]. F04-904-03 8) Remov e the faston [1] of the harness, and detach the duct unit [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-33 P 9.5 De veloping Assemb ly When disassembling/assem- bling the dev eloping assembly , keep the follo wing in mind: 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-34 P 9.5.2 Removing the Gr ip Assembly 1) Remov e the dev eloping assembly . (p. 4- 33P) 2) Remove the scre w [1] and free the three claws [2]; then, detach the grip assem- bly [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-35 P 9.5.5 Removing the Blade Base Unit 1) Remov e the dev eloping assembly upper cov er . (p. 4-34P) 2) Remov e the two scre ws [1], and detach the blade base unit [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-36 P 3) Remove the tw o scre ws [1] and the gear cov er [2]. 4) Remove the tw o gears [3]. F04-905-08 5) Put copy paper [3] between the de vel- oping cylinder [1] and the blade [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-37 P 8) Remov e the two scre ws [1], and detach the support roller [2] and the front sleev e holder [3]. F04-905-11 9) Remov e the two scre ws [1], and detach the support roller [2] and the slee ve holder [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-38 P 9.5.7 P ositioning the De v eloping Assembly Magnetic Seal 1) The front magnetic seal [1] and the rear magnetic seal [2] must be butted ag ainst the opening [3] (stop reference) when they are mounted.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-39 P 9.6 Removing the P aper Lint 9.6.1 Removing the P aper Lint 1) Open the front cov er . 2) Remov e the paper lint cleaning cove r [1] by inserting a flat-blade screwdri ver .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-40 P 9.7 W aste T oner Case 9.7.1 Replacing the W aste T oner Case 1) Remove the scre w [1], and detach the waste toner case cov er [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 IMAGE FORMA TION SYSTEM 4-41 P 9.7.2 Cleaning the W aste T oner Case 1) Remov e the screw [1], and detach the waste toner case co ver [2]. 2) T ak e out the waste toner case [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-1 P 1 Outline 1.1 Specifications and Construction T05-101-01 shows the .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-2 P 1.2 Arrangement of Rollers F05-101-01 The follo wing rollers are mainly used to mov e paper: Ref.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-3 P 1.3 Arrangement of Motors, Clutches , and Solenoids F05-102-01 The .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-4 P 1.4 Arrangement of Sensors F05-103-01 The follo wing sensors are us.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-5 P 2 Detecting J ams 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-6 P b . Other Delay Jams Other than pickup sensor delay jams, jams are found by other sensors at the following timing of detection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-7 P 2.1.2 Stationar y Ja m a. Common Stationary Jam Registration paper sensor (PS10), Fixing feeding sensor (PS13), No. 1 deli very paper sen- sor (PS15) F05-201-03 b .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-8 P [8] M2 M9 M1 CL1 [10] SL1 [2] [4] [3] [2] [4] [5] [5] [3] [7] [6] [11] [11] [1] [9] 3 Pickup Assemb ly 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-9 P 3.2 Outline The paper inside the cassette is held up by the lifter , and remains in contact with the pickup roller when pickup takes place: (1) The pickup motor (M2) is used to driv e the pickup roller .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-10 P 3.3 Sequence of Operations (pic kup) a.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-11 P 3.4 Operation of the Cassette Lifter The lifter is operated as necessary in the course of printing to maintain the stack of sheets to a specific height.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-12 P 3.4.2 Releasing the Lifter The lifter is released mechanically when the cassette is slid out. When the machine is in standby state, the lifter gear is held in place by the lifter gear retaining lever .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-13 P 3.5 Cassette Pickup Oper ation 3.5.1 Rotating the Pickup Roller The dri ve used to rotate the pickup roller is transmitted through gears.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-14 P Pickup Driv e for the Upper Cassette Holder (pickup motor in CW ro.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-15 P 3.6 Mo ving Up/Down the Pic kup Roller The pickup roller and the feeding roller are supported by a roller holder , and the pickup roller is mov ed up and do wn in relation to the feeding roller .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-16 P 3.7 Pickup Retry Operation When a delay is detected by a pickup sensor because of wear on the pick roller , pickup retry operation is ex ecuted.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-17 P 3.7.2 P aper Retraction If a delay is detected once again after a retry and the jam must be remove d, the paper can become torn if an attempt is made form the cassette side.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-18 P 3.8 Operation Other Than Cassette Pickup (standb y) When the cassette is slid into or out of the machine, the following tak es place: 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-19 P 2) Moving Up the Lifter When the main po wer is turned on with the.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-20 P 3.8.2 Moving Up the Pickup Roller Shaft and Releasing the Separati.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-21 P 2) Releasing the Separation Roller Pressure The le ver 1 is pro vided with a protrusion used to push do wn the separation roller assem- bly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-22 P If the cassette is full of paper If the cassette is empty of paper Note: The diagram is a view f rom the rear of the copying machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-23 P 3.10 Detecting the Presence/Absence of P aper Inside the Cassette .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-24 P 4 Identifying the Size of P aper The size of paper inside the cassette may be set using the dial on the cassette. The AB- setting and the Inch-setting are switched over using the switch found ne xt to the dial.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-25 P 4.3 P aper Size The width and the length of paper are identified by the dial mounted to the cassette is set.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-26 P 4.4 P aper Size List (AB-setting) Combination of states of cassett.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-27 P 5 Multif eeder 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-28 P 5.2 Identifying the Size of P aper in the Multif eeder 5.2.1 Detecting the Width of P aper The width of paper is detected by a variable resistor operating in conjunction with the mov ement of the slide guide.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-29 P 6 Controlling the Registration Roller 6.1 Outline The re gistration roller is driv en by the re gistration motor (M9) so that the paper and the image on the photosensitiv e drum will match at a specific point.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-30 P 7 Doub le-Sided Pr inting 7.1 Through-P ath Operation In this sequence of operations, paper after fixing is fed to the deli very assembly and then to the duplex feeding assembly using the re versing flapper .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-31 P 7.2 Outline of Operations For instance, through-path operations tak e place as follo ws when one set of double-sided prints are made of six originals: F05-703-01 1) The 1st sheet is picked up from the cassette.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-32 P F05-703-02 5) The 2nd sheet is switched back in the deli v- ery assembly , and is then sent to the duplex feeding assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-33 P 7.3 Detecting the Horizontal Registration P osition 7.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-34 P 7.3.2 Operation 1) T iming of Detecting Home Position When the mai.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-35 P 8 Controlling the Pic kup Assembly Motor 8.1 Pickup Assemb ly Motor The pickup assembly motor system consists of six stepping motors of 2-phase magnetic excitation type.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-36 P 9 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-37 P 9.1 Pickup Assemb ly 9.1.1 Removing the Pickup Assemb ly 1) Remov e the cassette 1/2. 2) Remov e the multifeeder tray .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-38 P 9.1.2 Removing the Pickup/F eeding/Separation Rollers 1) Remove the cassette 1/2. 2) Pick the tab [4] of each, and detach the pickup roller [1], feeding roller [2], and separation roller [3] in the axial direc- tion.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-39 P 9.1.4 Removing the F rame Lid 1) Remov e the pickup solenoid. (p. 5-38P) 2) Remov e the four scre ws [1], and dis- connect the four connectors [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-40 P 9.1.5 Removing the Pickup Motor 1) Remov e the frame lid. (p.5-39P) 2) Remove the tw o scre ws [1], and detach the pickup unit [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-41 P 3) Remov e the grip ring [1], and detach the vertical path clutch [2]. F05-901-12 9.1.7 Removing the Hor izontal Registration Sensor Shift Motor 1) Remov e the pickup assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-42 P 9.1.8 Checking the Image Rear F ront P osition Make copies in Direct, and check to make sure that the margin along the image front is 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-43 P 1) Remove the cassette. 2) Remov e the two scre ws [1], and detach the horizontal registration base assem- bly [2]. F05-901-16 3) Loosen the scre w [1], and adjust the horizontal registration plate [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-44 P 9.2 Multif eeder T ra y Assemb ly 9.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-45 P 9.2.2 Removing the Pickup Cov er 1) Open the pickup cov er [1]. 2) Remov e the member [2] from the rear . 3) Free the cable [4] from the hook [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-46 P 9.2.4 Removing the Separation Pa d 1) Remove the multifeeder tray pickup roller .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-47 P 9.2.5 Attaching the Timing Belt of the Multif eeder T ra y 1) Butt the two rack plates [1] of the multifeeder tray against both ends (area A).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-48 P [2] [1] [1] 1) Open the multifeeder tray . 2) Loosen the two scre ws [1], and mov e the side guide plate unit [2] back and forth to adjust.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-49 P 9.3 F eeding Assembly 9.3.1 Removing the Feeding Assemb ly 1) Remov e the cassette 1/2. 2) Remov e the pickup assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-50 P 9.3.2 Mounting the Feeding Assemb ly 1) Fit the hinge [2] of the feeding assem- bly in the hinge hole [3] in the frame (rear) of the host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-51 P 9.4 Registration Roller Assemb ly 9.4.1 Removing the Registration Roller 1) Remov e the front inside cov er (6 scre ws).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-52 P 9) Remove the E-ring [1] at the rear , and detach the gear [2] 10) Remo ve the spring [3]. 11) Remove the E-ring [4], and detach the bushing.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 PICK-UP/FEEDING SYSTEM 5-53 P 16) Remov e the E-ring [1] at the front, and detach the bushing [2]. 17) Remov e the lower re gistr ation roller [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-1 P 1 Outline of Operations 1.1 Outline The fixing system has the follo wing maj.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-2 P The follo wing diagram sho ws the major components of the fixing system: F06.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-3 P F06-101-02 Item Notation Description Fixing lower roller Pressure roller Fix.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-4 P 2 Fixing Dr iv e System 2.1 Outline The fixing dri ve system in v olves the follo wing control mechanisms: 1. Fixing roller driv e control 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-5 P 2.3 Controlling the Fixing Film Speed F06-202-02 shows the construction of t.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-6 P 3 Controlling the Fixing T emperature 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-7 P 3.2 T emperature Control The machine’ s fixing temperature is controlled u.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-8 P 3.2.1 Fixing T emperature Control The machine is equipped with the following modes to suit the type of paper used: plain paper , thick paper , bond paper, and en velope/postcard (each with a specif ic control table).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-9 P 3.3 Detecting Errors The machine checks for the follo wing in relation to its f ixing temperature control mecha- nism: 1. T emperature control error by main thermistor (TH1) 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-10 P E000 The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The main /sub heater has an open circuit.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-11 P 4 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and how to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-12 P 4.1 Fixing Assembly 4.1.1 Removing the Deliver y Cover 1) Open the deliv ery co ver [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-13 P 4.1.3 Removing the Fixing Assembly 1) Remov e the riser guide. (p. 6-12P) 2) Check to see if the feeding assembly is locked in position.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-14 P 4) Remov e the two springs [1], and open the front of the fixing assembly top [2] to detach. F06-401-07 5) Disconnect that front connector [1] (brown) and the rear connector [2] (black).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-15 P 4) Free the claw [2] of the inlet lo wer guide [1], and slide it to the rear to re- move. T ak e care not to damage the f ix- ing roller .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-16 P 4.1.7 Removing the Cleaning Roller Unit 1) Remove the scre w [1], and detach the outlet guide support plate [2]. 2) Remov e the cleaning roller unit [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 FIXING SYSTEM 6-17 P 4.1.9 Removing the Fixing Dr ive Unit 1) Remov e the fixing assembly . (p. 6-13P) 2) Check to see that the feeding assembly is locked in place.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTR OLS.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-1 P 1 Control P anel 1.1 Outline The machine’ s control panel consists of the following PCBs and a touch panel (LCD) with a resolution of 320 × 240 dots.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-2 P 2 F ans 2.1 Arrangement, Functions, and Error Codes The names and f.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-3 P The arrangement of the fans and the directions of current are as fo.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-4 P 2.2 Operation 2.2.1 2-Speed Control Some of the machine’ s fans are controlled for two speeds (F07-202-01); the v oltage switching PCB of each fan changes its output v oltage to switch between speeds.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-5 P 3 P o wer Supply 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-6 P The machine distributes po wer as follo ws: F07-301-01 Leakage brea.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-7 P 3.1.2 P ow er Outputs The machine’ s power outputs are controlled by the main po wer switch (SW1) and the control panel power switch (SW826), or signals from the printer board.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-8 P 3.2 Rated Outputs of the Main P ow er Supply PCB Output 24VU1 24VU1-SW 24VU2 24VU3 Connector No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-9 P 3.4 Rated Outputs of the Accessories P ower Supply PCB Output 24V A1 24V A2 Connector No. J703-2 J702-1 J704-6 J702-4 Output voltage tolerance +7%, -5% Rated output voltage 24V Rated output current 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-10 P 3.5 Protectiv e Functions The machine’ s each power supply PCB is equipped with an ov ercurrent protection circuit designed to cut off the output of each po wer supply when they go ON.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-11 P 4 Others 4.1 Silent Mode In silent mode, the driv e of the laser scanner motor during standby is stopped for a spe- cific period of time* after the start of standby to reduce the machine’ s operating noise.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-12 P 5 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-13 P 5.1 Exter nal Cov ers Remov e the cove rs as needed when cleaning, checking, or repairing the inside of the machine. REF .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-14 P 5.1.1 Removing the F ront Cov er 1) Open the front cov er [1], and shift up the L-shaped pin [2] with your finger . 2) Shift the L-shaped pin [2] to the right to detach the front cov er [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-15 P 5.1.3 Removing the Suppor t Cov er 1) Remov e the support cov er . (1 screw) 2) Remov e the left rear cover . 3) Open the front cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-16 P 5.2 Control P anel 5.2.1 Removing the Control P anel 1) Remo ve the support co ver . (p. 7-15P) 2) Remove the reader front co v er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-17 P 5.3 PCBs 5.3.1 Removing the DC Controller PCB 1) Remov e the rear cov er . (7 screws) 2) Remov e the fi ve screws [1], and detach the connector guard plate [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-18 P 5.3.4 Removing the HDD When removing the HDD, take full care against static charges. Also, do not subject the HDD to impact.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-19 P 5.3.5 Removing the HDD Unit When removing the HDD unit, take full care against static elec- tricity . Do not subject the HDD unit to impact.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-20 P 5.3.7 Removing the Reader Controller PCB 1) Remove the rear co ve r . (7 screws) 2) Remov e the HDD unit. (p. 7-19P) 3) Disconnect all the connectors of the harness.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-21 P 5.3.10 When Replacing the Main Controller PCB “T roubleshooting”>Chapter 4 “Troubleshooting Image F aults/Malfunctions” >6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 EXTERNALS AND CONTROLS 7-22 P 5.3.13 Removing the Main P ower Supply 1) Remove the accessories po wer supply . (See item 5.3.12.) 2) Disconnect all the connectors.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-1 P 1.1 Pickup 1.1.1 Outline The paper deck (hereafter , “deck”) is capable.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-2 P F08-101-01 PS1D PS6D CL2D M1D SL1D DC controller PCB (host machine) Deck dr.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-3 P 1.1.3 Sequence of Pickup Operations (deck) F08-101-02 INTR LSTR STBY Start .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-4 P 1.2 Detecting P aper in the Deck 1.2.1 Detecting the Presence/Absence of Paper The presence/absence of paper inside the deck is detected by the deck paper absence sen- sor [1] (PS2D).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-5 P 1.2.3 Detecting the Lev el of P aper in the Deck The deck uses the deck pap.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-6 P 1.3 Deck Lifter 1.3.1 Detecting the Presence/Absence of Paper The lifter of.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-7 P M2D M1D [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-8 P 1.3.2 Indicating the Lev el of P aper (deck front cov er) The dri ve of the deck lifter motor [1] (M2D) is recei ved by a coupling [2], and is for - warded to the ra ck [4] by way of the dri ve belt [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-9 P 1.4 Opening/Closing of the Compar tment 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-10 P 1.4.2 Sequence of Operations (opening/closing of the compar tment) F08-104.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-11 P 1.5 Controlling the Dec k Motor 1.5.1 Controlling the Deck Main Motor (M1D) The deck main motor (M1D) is a stepping motor , and is controlled by the DC controller of the host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-12 P 1.5.2 Controlling the Deck Lifter Motor (M2D) The deck lifter motor control circuit is found on the side deck driv er PCB. F08-105-02 is a block diagram of the PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-13 P M2D Host machine DC controller PCB Combina- tion circuit Motor drive circu.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-14 P 2 Detecting Jams 2.1 Outline The paper deck is equipped with two sensors (F08-201-01) to monitor the mov ement of paper .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-15 P The DC controller of the host machine will identify a jam in response to the follo wing condition: 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-16 P 3 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-17 P 3.1 Exter nal Cov ers [1] Deck releasing grip [2] Front upper cover [3] Compartment open/closed switch [4] Front cover [5] Right cover [6] Upper cover [7] Rear co ver F08-301-01 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-18 P 3.1.2 Removing the F ront Cov er 1) Sliding out the compartment. (p. 8-17P) 2) Loosen the four screws [1], and shift the front cov er [2] to detach it to the front.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-19 P Be sure to mount the front cov er so that gap A between the front cov er [1] and the front upper cov er [2] is 3 ±1 mm.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-20 P Moving the Dec k Lifter 1) Sliding out the compartment. (p. 8-17P) 2) If paper is found, remov e all of it. 3) Connect the power plug, and turn on the power switch of the host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-21 P 3.1.4 Removing the Right Cov er 1) Sliding out the compartment. (p. 8-17P) 2) Remov e the three scre ws [1], and shift the right cov er [2] do wn, and then de- tach it to the front.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-22 P 3.1.6 Removing the Upper Cove r 1) Remov e the rear cov er . (p. 8-20P) 2) Sliding out the compartment. (p. 8-17P) 3) Remov e the front upper cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-23 P 3.2 P aper Deck Body 3.2.1 Removing the Deck from the Host Machine 1) T o pre vent deformation of the roller support plate [1], lay copy paper [3] (A: about 8 cm) or the like on the floor on which to place the deck [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-24 P 4) Remov e the two scre ws [1] on the left, and detach the deck [2] from the deck base [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-25 P 3.2.2 Removing the Compar tment 1) T o pre vent deformation of the roller support plate [1], lay copy paper [3] (A: about 8 cm) or the like on the floor on which to place the deck [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-26 P 5) Remov e the scre w [1] at the left of the deck, and remove the stopper plate [2]; then, slide out the compartment [2] to the front.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-27 P 3.2.3 Changing the Deck P aper Size If the deck paper size must be changed to suit the needs of the user , perform the f ol- lo wing: 1) Remov e the front cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-28 P 3.2.5 Checking the Image Rear F ront P osition Make copies from the Paper Deck in Di- rect, and check to make sure that the margin along the image front is 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-29 P 3.2.7 Adjusting the Registration for the Dec k If you must adjust the left/right registra- tion (standard: 0 ±1.5 mm), perform the fol- lo wing: 1) Sliding out the compartment.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-30 P 3.3 Dr ive System 3.3.1 Removing the Deck Pickup Clutch (CL2D) 1) Remov e the deck pickup unit. (p. 8- 37P) 2) Disconnect the connector [1], and re- mov e the E-ring [2]; then, detach the deck pickup clutch [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-31 P 3.3.3 Removing the Deck Main Motor (M1D) 1) Remov e the rear cov er . (p. 8-20P) 2) Disconnect the connector [1], and re- mov e the two scre ws [2] : then, detach the deck main motor [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-32 P 4) Remove the compartment. (p. 8-25P) 5) Disconnect the connector [1], and re- mov e the fi ve screws [2]; then, detach the deck lifter motor unit [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-33 P 6) Remov e the front cov er of the deck. (p. 8-18P) 7) Remov e the four scre ws [1], and detach the roller support plate [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-34 P 3.3.6 Removing the Lifter Cable (dec k rear) • Perform steps 1) through 3) under 3.3.5 “Removing the Lifter Cable (deck front).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-35 P 9) Fit a wrench [2] into the home of the lifter driv e shaft [1] to fix it in place (against rotation).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-36 P 3.3.7 Routing the Lifter Cable 1) Check to make sure that the lifter dri ve shaft [1] and the lifter [2] are k ept in place by means of a hex wrench [3] and two long scre wdrivers [4].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-37 P 3.4 F eeding Mechanism 3.4.1 Removing the Deck Pic kup Unit 1) Remov e the upper cov er . (p. 8-22P) 2) Remov e the deck releasing grip [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-38 P 3.4.3 Mounting the Deck Pickup Roller Body Front (collar: silver -colored).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-39 P 3.4.5 Or ientation of the Deck Pic kup/F eeding Roller When mounting the deck pickup/feeding roller [1], be sure that the belt pulley [2] is tow ard the front of the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-40 P The urethane sponge used on the deck separation roller is pink upon foaming, and changes ov er time to orange and then yellow , acceler ating the rate of change if exposed to light.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-41 P 3.4.8 P osition of the Dec k Pic kup Roller Releasing Solenoid (SL1D) Befo.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 8 P APER DECK-L1 8-42 P 3.5 Electr ical Mechanisms 3.5.1 Removing the Deck Drive PCB 1) Remov e the rear cov er . (p. 8-20P) 2) Disconnect the sev en connectors [1], and remov e the four scre ws [2]; then, detach the deck driv er PCB [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-1 P 1 Outline 1.1 Specifications and Construction T09-101-01 shows t.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-2 P 1.2 Arrangement of Rollers F09-102-01 The follo wing rollers are.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-3 P 1.3 Arrangement of Motors, Clutches , and Solenoids F09-103-01 T.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-4 P 1.4 Arrangement of Sensors F09-104-01 The follo wing sensors are.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-5 P 2 Detecting J ams 2.1 Sequence of Jam Detection 2.1.1 Delay Jams See the descriptions under “Pickup/Feeding System” in Chapter 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-6 P 3 Pickup Assemb ly 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-7 P 3.2 Outline See the descriptions under “Pickup/Feeding System” in Chapter 5. 3.3 Sequence of Operations (pic kup) See the descriptions under “Pickup/Feeding System” in Chapter 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-8 P 4 Identifying the Size of P aper 4.1 Identifying the Size See the descriptions under “Pickup/Feeding System” in Chapter 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-9 P 5 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and how to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-10 P 5.1 Exter nal Covers F09-501-01 [1] [2] [3] [4] [5] [6] [1] Cas.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-11 P 5.1.1 Removing the Pickup Cov er 1) Open the pickup cov er [1]. 2) Open the vertical path assembly [2], and disconnect the connector [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-12 P 5.2 Pickup Assemb ly 5.2.1 Removing the Pickup Assembly 1) Remove the cassette 3/4. 2) Remov e the pickup cov er .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-13 P 5.2.2 Removing the Pickup/F eeding/Separation Roller See “Pickup/Feeding System” in Chapter 5-9.1.2. 5.2.3 Removing the Pickup Soleroid See “Pickup/Feeding System” in Chapter 5-9.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-14 P 5.3 PCBs 5.3.1 Removing the Cassette Size Detection Unit 1) Remove the cassette 3/4. 2) Fit a flat-blade scre wdriv er [2] into the opening in the inner cov er [1], and free the two claws [3] to detach.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-15 P 5.3.2 Removing the P edestal Controller PCB 1) Disconnect the lattice connector from the host machine. 2) Remov e the rear ove r .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-16 P 5.4 Dr ive Mechanisms 5.4.1 Removing the Main Motor Dr ive Unit 1) Disconnect the lattice connector from the host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 9 CASSETTE FEEDING UNIT -W1 9-17 P 5.4.3 Mounting the P edestal Main Motor 1) When mounting the pedestal main mo- tor , be sure to tighten the screws in the order indicated in the figure: (1) through (4).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-1 P 1 Specifications 1.1 T ype Item Description Number of bins 3 in total 1 bin (No. 2 deliv ery slot) Deliv ery tray inside host machine External (No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-2 P 1.2 Cross Section F10-102-01 [2] [5] [3] [6] [4] [1] [1] No. 3 deliv ery roller [2] No. 3 delive ry flapper [3] No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-3 P 2 Outline 2.1 Arrangement of Rollers and Sensors F10-201-01 M8 M7 PS24B No .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-4 P 2.2 Deliv er y to the No . 2 Delive r y Slot Sheets are sent to the No. 2 deliv ery slot as follo ws: 1) A sheet arriv es from the host machine’ s deliv ery assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-5 P 2.3 Deliv er y to the No . 3 Deliv er y Slot Sheets are sent to the No. 3 deliv ery slot as follo ws: 1) A sheet arriv es from the host machine’ s deliv ery assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-6 P 3) When the trailing edge of the sheet reaches a specif ic point in front of the No. 2 deliv ery roller , the 2-way deliv ery outlet motor stops to rotate.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-7 P 2.4 Detecting Jams 2.4.1 Arrangement of Sensors The follo wing sho ws the sensor used to detect jams in the Inner 2-W ay-A1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-8 P 2.4.2 Delay Ja m The time it takes for a sheet to mov e from the sensor N-1 to the delay jam sensor N is monitored with reference to the clock pulses from the main motor .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-9 P 2.4.3 Stationar y Ja m A stationary jam will be identified if a specif ic sensor remains ON for a specific period of time.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-10 P 3 Disassembly and Assemb ly The discussions that follow co ver the machine’ s mechanical characteristics and ho w to disassemble/assemble the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-11 P 3.1 Exter nal Cov ers F10-301-01 [1] Inner 2-way deli very unit (2 scre ws) [2] Inside delive ry tray [3] Connector cover (1 scre w) 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-12 P 3) Remove the scre w [1], and detach the connector cov er [2]. F10-201-03 4) Disconnect the two connectors [1]. F10-201-04 5) Close the inner 2-way deli ve ry unit [1].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-13 P 6) Remov e the screw [1] and the stepped scre w [2] from inside. F10-201-06 7) Remov e the screw [1] and the stepped scre w [2] from outside.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 10 INNER 2 W A Y TRA Y -A1 10-14 P 8) Remo ve the rib [2] from the stay [1] of the host machine, and remov e the inner 2-way deli ve ry unit [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT A CHMENT -B1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-1 P 1 En v elope F eeder Attachment-B1 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-2 P 1.2 Specifications 1.2.1 Env elope Cassette Item Description Remarks Method of pickup Front loading Reference of paper mo vement Center Switching of size In user mode By user .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-3 P 1.2.2 Env elopes The en velope feeder is designed to accommodate en velopes of the follo wing specifica- tions: T ype Shorter side (X) × longer side (Y) Recommendation COM10 104.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-4 P 1.2.3 Guaranteed Image Area The guaranteed image area is 10 mm or more from each edge of the en velope; if triple- layered because of the flap, within 5 mm or more.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-5 P 1.3 Pickup 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-6 P 2 Detecting Jams 2.1 Outline There are no specific types of jams that are unique to the en velope feeder , and jams ar e detected as by the jam detection mechanism of the host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-7 P 5 Making Adjustments 5.1 Outline If you want to use en velopes with a different conf iguration in the en velope feeder , you need to replace the spring to suit the ne w en velope.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-8 P 3) Thread the edge of the spring [1] that comes as an attachment so as to fit it through the catch 1 [2] and then the catch 2 [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 11 ENVELOPE FEEDER A TT ACHMENT -B1 11-9 P Mounting Hole by Side Guide Plate (front) (The side guide rear is symmetrically opposite.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 T R OUBLESHOO TING.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS T1 Contents CHAPTER 1 MAINTENANCE AND INSPECTION CHAPTER 2 IMA GE ADJUSTMENT BASIC PROCEDURE 1 Periodically Replaced Pa rts ........... 1-1T 1.1 Reader Unit .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS T2 CHAPTER 4 TR OUBLESHOO TING IMA GE F A UL TS/ MALFUNCTIONS 1 Making Initial Checks ................... 4-1T 1. 1 Checking the Site of Installation .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS T3 3. 6 The copy is foggy (entire face) .............................................. 4-13T 3.7 The copy is foggy (vertical) .. 4-14T 3.8 The copy has a black line (vertical, fuzzy , thick) .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS T4 1 Outline of Service Mode ............... 5-1T 1.1 Outline .................................... 5-1T 1.2 Starting Service Mode and Making Selections .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CONTENTS T5 1 Self Diagnosis ............................... 6-1T 1.1 Detail Codes (copier) .............. 6-3T 1.2 ADF Error Codes .................. 6-37T 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-1 T 1 P eriodically Replaced P ar ts Some of the parts used in the .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-2 T 2 Consumables and Dur ab les Some parts of the machine may require replacement over the period of product wa rranty because of wear or damage.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-3 T 2.4 Side P aper Deck As of March 2001 No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-4 T 3 P eriodical Ser vicing Procedure 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-5 T 6. Feeding System Clean the following: (1) feeding assembly base, (2) f ixing inlet guide (upper, lo wer), (3) transfer guide, (4) pre-registra tion assembly (paper lint).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-6 T 4 Scheduled Ser vicing Char t Do not use solvents or oils not indicated herein. 4.1 Reader Unit : Clean : Replace ×: Lubricate : Adjust : Inspect T01-401-01 Par t Scanner cable Scanner rail Copyboard glass No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-7 T 4.2 Printer Unit : Clean : Replace ×: Lubricate : Adjust : Ins.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-8 T 5 P oints to Note f or Scheduled Ser vicing Unless otherwise indicated, use lint-free paper and alcohol.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 1 MAINTENANCE AND INSPECTION 1-9 T 6 Cleaning the Bottom of the De veloping Assemb ly If the bottom of the dev eloping assembly is not c leaned thoroughly , the residual toner can soil the back and the leading edge or left/right edges of prints.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 2 IMA GE ADJUSTMENT BASIC PR OCEDURE.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 2-1 T CHAPTER 2 IMA GE ADJUSTMENT BASIC PROCEDURE Execute the f ollowing in service mode: COPIER>FUNCTION>CCD>CCD-ADJ.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 2-2 T CHAPTER 2 IMA GE ADJUSTMENT BASIC PROCEDURE YES NO NO NO NO NO NO NO NO NO NO Is there a vertical li.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-1 T 1 Image Adjustments 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-2 T 1.2 Checking the Image P osition Make prints using the follo wi.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-3 T 1.3 Adjusting Left/Right lamge Margin 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-4 T 1.3.2 Adjusting the Registration for the Multif eeder Rear Fron.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-5 T 1.3.4 Duplex F eeding Unit 1) Adjust the image margin as indicated using service mode: COPIER>ADJUST>Feed- ADJ>ADJ-REFE.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-6 T 1.6 Adjusting the Leading Edge Non-Image Width 1) Adjust the non-image width in service mode so that it is as indicated: COPIER>ADJUST>ADJ-XY>ADJ-X.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-7 T 2.2 Mounting the Motor Unit 1) Engage the pulley [2] of the motor unit [1] with the belt [3]. 2) Using two scre ws [4], mount the motor unit [1] temporarily .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-8 T 2.3 Routing the Scanner Dr iv e Cable Route the scanner cable as follows to the pulle ys and the hook mirror base: 1) Loosen the scre w on the cable fixing plate.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-9 T 2.4 Adjusting the P osition of the No .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-10 T 2) Fit the pins of the mirror positioning tool (front [2], rear [3]) into the holes [1] of the rail and the No. 1/No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-11 T 2.5 Mounting the Cop yboard Glass F03-205-01 • When mounting the copyboard glass, b utt the copyboard glass [1] against the vertical/horizontal size plate [2].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-12 T 2.6 Mounting the Reader Upper F rame 1) Fit the eight claws [2] of the reader frame [1] (circled) into the cut-of fs [4] in the reader upper frame [3]; take care so that the engagement is secure.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-13 T 3 Image F or mation System 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-14 T 3.3 Removing the P aper Lint 1) Open the front cov er . 2) Remove the paper lint cleaning co ve r [1] by inserting a flat-blade screwdri ver .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-15 T 3.4 Cleaning the W aste T oner Case 1) Remov e the screw [1], and detach the waste toner case co ver [2]. 2) T ak e out the waste toner case [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-16 T 4 Fixing System 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-17 T 5 P aper Dec k 5.1 Mounting the F ront Cov er 1) When mounting the front cov er , be sure to match it against the coupling [1] of the paper lev el indicator .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-18 T 5.2 Adjusting the P aper Lev el Indicator 1) Mov e the driv e belt [2] of the paper lev el indicator behind the front cov er [1] by hand so that the white area inside the window [3] increases, i.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-19 T 5.4 Mounting the Dec k Pickup Roller Body Front (collar: silv.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-20 T 5.6 Or ientation of the Deck Pic kup/Feeding Roller When mounting the deck pickup/feeding roller [1], be sure that the belt pulley [2] is tow ard the front of the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-21 T 5.8 P osition of the Deck Pic kup Roller Releasing Solenoid (.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-22 T 5.9 Adjusting the Height of the Side Member 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-23 T 6 Cassette F eeding Unit-W1 6.1 Mounting the P edestal Main Motor 1) When mounting the pedestal main mo- tor , be sure to tighten the screws in the order indicated in the figure: (1) through (4).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-24 T 7 En v elope F eeder Attachment 7.1 En v elopes and T ype of Spr ing • Use the green-painted spring for COM10, Monarch, DL, and Y OUKEI 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST AND ARDS AND ADJUSTMENTS 3-25 T 3) Thread the edge of the spring [1] that comes as an attachment so as to fit it through the catch 1 [2] and then the catch 2 [3].
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 3 ST ANDARDS AND ADJUSTMENTS 3-26 T Mounting Hole by Side Guide Plate (front) (The side guide rear is symmetrically opposite.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TR OUBLESHOO TING IMA GE F A UL TS/ MALFUNCTIONS.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-1 T 1 Making Initial Chec ks 1.1 Checking the Site of Installation 1. There must be a source of power rated as indicated (rated v oltage ± 10%).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-2 T 1.4 Charging Roller and Static Eliminator 1. Check the transfer charging roller and the separation static eliminator for dirt and a fault (damage).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-3 T 1.9 Others In winter , bringing a machine from a cold to warm place can cause condensation inside the machine, causing various problems.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-4 T Blank Page.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 4-6 T CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 2 Samples of Image F aults.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-7 T 3 T roubleshooting Image F aults 3.1 The copy is too light (halftone area only). 1) Perform the Image Adjustment Basic Procedure.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-8 T 3.2 The cop y is too light (including solid b lac k). 1) Perform the Image Adjustment Basic Procedure.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-9 T T r ansfer guide, High-voltage cord, Compos.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-10 T 3.3 The cop y is too light (entire f ace, considerab le). 1) Perform the Image adjustment Basic Procedure.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-11 T T r ansfer guide 9) Is there foreign matter in the transfer guide assembly or the transfer charging roller assembly , and is there electrical leakage ? YES: Remove the foreign matter .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-12 T 3.4 The cop y has une v en density (dar ker at front). 3.5 The cop y has une ven density (lighter at front).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-13 T 3.6 The cop y is f oggy (entire face). Scanner 1) Clean the scanning lamp, reflecting plate, mirrors, and lenses.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-14 T 3.7 The cop y is f oggy (ver tical). 3.8 The cop y has a b lac k line (v er tical, fuzzy , thick).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-15 T 3.9 The cop y has a b lac k line (v er tical, fine). Exposure system 1) Generate a halftone test print in service mode.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-16 T 3.10 The cop y has a white spot (v er tical). 3.11 The cop y has a white line (v er tical). Exposure system 1) Generate a halftone test print in service mode.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-17 T 3.12 The cop y has a white spot (horizontal). Exposure system 1) Generate a halftone test print in service mode.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-18 T 3.13 The back of the cop y is soiled/Soiled edge. Exposure system 1) T urn off the main po wer switch while paper is moving in the feeding assembly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-19 T 3.14 The cop y has a fixing f ault. 1) Does the problem occur when the machine is first turned on (as in the morning)? NO: Go to step 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-20 T 3.15 The cop y has a displaced leading edge. 3.16 The cop y has a displaced leading edge (large margin).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-21 T 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-22 T 3.19 The cop y is f oggy (hor izontal). 1) Does the problem occur at the same position on all copies made in Di- rect.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-23 T 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-24 T 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-25 T W iring 1 0) Is the wiring between the CCD PCB and the reader controller PCB nor- mal? NO: Correct the wiring.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-26 T 3.22 The cop y is completely b lac k. Scanning lamp 1) Is the scanning lamp ON during copying operation? NO: See “The scanning lamp fails to go ON.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-27 T 3.23 The cop y has a b loc k/white dot after replacement of the dr um unit. 1) Execute the follo wing in service mode: FUNCTION>DPC>D- GAMMA.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-28 T 4 T roubleshooting Malfunctions 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-29 T 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-30 T 4.2 Printer Unit 4.2.1 Pickup f ails. 1. General condition Slide out and then in the cassette.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-31 T 4.2.2 The lifter fails to mov e up (pickup from the cassette). 1. Releasing lev er (f or pickup roller) Push in the releasing lev er to ward the rear .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-32 T 4.2.3 The ver tical path roller fails to rotate . 1. Main motor Is ‘E010’ (faulty main motor) indicated? YES: See the descriptions on E010 in Chapter 6 “Self Diagnosis.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-33 T 4.2.5 Pickup from the multif eeder tra y fails (i.e ., the pickup roller f ails to ro- tate).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-34 T 4.2.7 The photosensitive drum fails to rotate. 1. Main motor Is ‘E010’ (faulty main motor) indicated? YES: See the description on ‘E010’ in Chapter 6 “Self Diagnosis.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-35 T 4.3 Reader Unit 4.3.1 The No. 1 mirror base fails to mov e. 1. Initial check Is the scanner motor driv en? YES: Go to step 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-36 T 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-37 T 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-38 T 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-39 T 4.5 P aper Deck 4.5.1 Pickup f ails. 1. Right upper cov er , Right lower co ver Are the right upper cov er and the right lo wer cov er closed securely? NO: Close the cov ers.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-40 T 4.5.2 The deck lifter f ails to mov e up. 1. Deck body Is the deck body mounted correctly? NO: Mount the deck body correctly .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-41 T 5 T roubleshooting F eeding F aults 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-42 T 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-43 T 5.1.2 Separation/Feeding Assemb ly 1. Paper Try paper of a recommended type. Is the problem corrected? YES: Advise the user to use recommended paper .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-44 T 4. Fixing/feed sensor (PS13), No. 1 deliv ery sensor (PS15) Find the sensor that detected the jam in service mode (COPIER>DISPLA Y>J AM).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-45 T 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-46 T 6 Outline of Electr ical Components 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-47 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-48 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-49 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-50 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-51 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-52 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-53 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-54 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-55 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-56 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-57 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-58 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-59 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-60 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-61 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-62 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-63 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-64 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-65 T 6.2.7 PCBs • Reader Unit Ref. Description Remarks Name [12] Controls the reader unit/ADF . Reader controller PCB [13] Dri ves the CCD.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-66 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-67 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-68 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-69 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-70 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-71 T 6.4.1 Clutches Electrical signal (target) Reference to general I/O address Remarks Name circuit diagram I/O indication CL1C (PEDE-FEED) A6-11-F V ertical path roller clutch 0: ON, 1: OFF 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-72 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-73 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-74 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-75 T 6.5.1 Solenoids Electrical signal (target) Reference to general I/O address Remarks Name circuit diagram I/O indication SL3B (DC-CON) A7-2-K 2-way delivery solenoid 0: ON, 1: OFF 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-76 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-77 T 6.6.1 Others Electrical signal (target) Reference to general I/O address Remarks Name circuit diagram I/O indication SP1 (F AX-CON) A3-1-E Speaker 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-78 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-79 T 6.7.1 Main Controller PCB F04-607-01 The DIP switch (SW1002) is designed for adjustments at the factory , and is not normally used in the field.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-80 T 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 4 TROUBLESHOO TING IMA GE F A UL TS/MALFUNCTIONS 4-81 T 6.7.4 Composite P ow er Supply PCB When replacing the PCB, be sure to enter the settings indicated on the service label [1] in service mode.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-1 T 1 Outline of Ser vice Mode 1.1 Outline The service mode screens are organized in three le vels: Initial screen, Lev el 1/Le vel 2 Item screen, Lev el 3 Item scr een.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-2 T The machines’ service mode consists of the follo wing se ven types: F05-101-02 1.2 Star ting Ser vice Mode and Making Selections 1) Press the User Mode key ‘ ’ .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-3 T 1.3 Ending Ser vice Mode • Press the Reset ke y once to return to the Service Mode Initial screen (F05-101-03). • Press the Reset ke y twice to end service mode and return to the User screen (standard).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-4 T 1.5 Using Ser vice Mode 1.5.1 Initial Screen F05-105-01 1.5.2 Lev el 1/Le vel 2 Item Screen F05-105-02 FA X COPIER FEEDER SORTER FA X BOARD Initial settings Touch an item to select.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-5 T 1.5.3 Lev el 3 Item Screen F05-105-03 F05-105-04 Counter Te s t Option Function Adjust I/O Display VERSION 1/ 2 READ Y DC-CON R-CON P ANEL FEEDER SOR TER NIB PS/PCL LIPS 01.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-6 T 2 DISPLA Y Control Displa y Mode 2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-7 T <VERSION> Indicates the version of the machine and the v ersion f the R OM on the accessories PCB .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-8 T PUNCH Indicates the version of the softw are of the punch unit. LANG-EN Indicates the version of the English f ile. LANG-FR Indicates the version of the French f ile.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-9 T LANG-NO Indicates the version of the Norwe gian file. LANG-PL Indicates the version of the Polish f ile. LANG-PT Indicates the version of the Portuguese f ile.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-10 T <USER> Indicates items related to the User screen and the user . LANGU A GE Indicates the language/paper size configuration used.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-11 T RAM Indicates the size of memory mounted to the main controller . (64 MB, 128 MB) NIB Indicates the connection of a network board.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-12 T <CST -STS> Indicates the size of paper in the cassettes and the manual feeder . WIDTH-MF Indicates the width of paper in terms of paper size (manual feed).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-13 T Item Description Remarks AA Indicates the order of jams 1 to 50 (50 max.) (the higher the number , the older the jam). BBBB Indicates the date of occurrence.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-14 T FF: T ypes of Jams Code T ype 00xx none 01xx delay jam 02xx stationary jam .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-15 T FFff: Sensor/T ype (jams in Saddle Finisher-G1) Code Sensor/type Sensor use.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-16 T <ERR> Indicate error data. F05-201-03 Item Description Remarks AA Indicates the order of errors 1 to 50 (50 max.) (the higher the number , the older the error).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-17 T <HV -STS> Indicates the measurements taken of v oltage/current. PRIMAR Y Indicates the level of current of primary char ging in relation to photosensi- tiv e drum resistance detection control (APVC).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-18 T <ALARM-2> Indicates alarm data. F05-201-04 Item Description Remarks AA Indicates the order of alarms 1 to 50 (the higher the number , the older the alarm).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-19 T EE (location code) EE (location) FFFF (description) 02 scanner in reader un.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-20 T 3 I/O , I/O Displa y mode The fowling screen will appear in response to COP.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-21 T 3.1 DC-CON Indicates the input/output ports of the DC controller PCBs.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-22 T <DC-CON (2/7)> Address bit Notation Description Remarks P005 0 M6 dup.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-23 T <DC-CON (3/7)> Address bit Notation Description Remarks P010 0 M5 del.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-24 T <DC-CON (4/7)> Address bit Notation Description Remarks P013 0 S4 cas.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-25 T <DC-CON (5/7)> Address bit Notation Description Remarks P018 0 print .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-26 T <DC-CON (6/7)> Address bit Notation Description Remarks P022 0 contro.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-27 T <DC-CON (7/7)> Address bit Notation Description Remarks P027 0 100/20.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-28 T 3.2 R-CON Indicates the input/output ports of the reader controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-29 T <R-CON (2/3)> Address bit Notation Description Remarks IO-P05 0 print.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-30 T <R-CON (3/3)> Address bit Notation Description Remarks IO-P10 0 - 7 n.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-31 T 3.3 MN-CON Indicates the input/output ports for the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-32 T <MN-CON (2/2)> Address bit Notation Description Remarks P007 15 GPO f.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-33 T 3.4 FEEDER Indicates the input/output ports of the ADF controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-34 T <FEEDER (2/2)> Address bit Notation Description Remarks IO-P05 0 VR 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-35 T 3.5 SOR TER Indicates the input/output ports for the finisher controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-36 T <SOR TER (2/8)> Address bit Notation Description Remarks IO-P006 0 M3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-37 T <SOR TER (3/8)> Address bit Notation Description Remarks IO-P012 0-7 .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-38 T <SOR TER (4/8)> 3.5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-39 T <SOR TER (5/8)> Address bit Notation Description Remarks P006 0 PI21 .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-40 T <SOR TER (6/8)> Address bit Notation Description Remarks P012 0 PI23 .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-41 T <SOR TER (7/8)> 3.5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-42 T <SOR TER (8/8)> Address bit Notation Description Remarks P021 0 M2P h.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-43 T deliv ery motor current switch 1 deliv ery motor current switch 2 Current (A) (P011-3) (P005-5) 1 1 0.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-44 T 4 ADJUST Adjustment Mode 4.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-45 T <AE> Use it to execute AE adjustment. If you hav e cleared the RAM on the reader controller PCB, enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-46 T <ADJ-XY> Use it to adjust the image read start position. If you hav e cleared the RAM on the reader controller PCB and replaced the PCB, use it to enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-47 T ADJ-S Use it to adjust the scanner home position. Range of 16 to 128 adjustment Caution Do not use this mode; it is for factory use only .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-48 T <CCD> Use it to make CCD/shading-related adjustments. If faulty images are generated after the ex ecution of COPIER>FUNCTION>CCD>CCD- ADJ, enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-49 T <DEVELOP> Use it to adjust the dev eloping bias output. DE-DC Use it to enter the adjustment value for the DC component of the de velop- ing bias within the image area.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-50 T <DENS> Use it to fine-adjust the cop y density auto correction mechanism. If you hav e cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-51 T <HV -PRI> Use it to adjust the output of the primary charging assembly . If you hav e cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the setting indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-52 T OFST1-DC Use it to enter the adjustment value for the primary char ging DC of fset 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-53 T <HV -TR> User it to adjust the output for transfer charging/pre-transfer . If you hav e cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-54 T <FEED-ADJ> Use it to make feeder -related adjustments. If you hav e cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-55 T MF-A4 Use it to enter the paper width basic value for the multifeeder tray (A4). Range of 0 to 1024 adjustment COPIER>ADJUST>FIXING <FIXING> Use it to make f ixing-relating adjustments.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-56 T <MISC> Use it to make other adjustments. If you hav e cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the settings indicated on the service label.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-57 T DK-ADJ-Y Use it to enter the horizontal registration adjustment v alue for the paper deck. • Use it to enter a laser write position value in relation to the re gistered value for paper pick ed up from the paper deck.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-58 T 4.2 FEEDER DOCST Use it to adjust the original leading edge registration when the ADF is used. • A higher setting decreases the leading edge margin.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-59 T 4.3 SOR TER PNCH-HLE Use it to adjust the punch hole position (paper feed direction) when the puncher unit is in use. • A higher setting shifts the punch hole tow ard the leading edge of paper (middle of paper).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-60 T PNCH-Y Use it to adjust the punch hole position (front/rear of paper) when the puncher unit is in use. • A higher setting shifts the punch hole tow ard the front of paper .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-61 T 5 FUNCTION Operation/Inspection Mode 5.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-62 T <INST ALL> Use it as part of installation work.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-63 T <CCD> Use it to ex ecute CCD/shading-related automatic adjustment. CCD-ADJ Use it to ex ecute automatic adjustment of the CCD.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-64 T SHDG-POS Use it to enter data for changing the position of measurement on the stan- dard white plate used for shading correction.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-65 T SH-PS-ST Use it to ex ecute optimum position auto adjustment for the standard white plate for shading correction. Caution • Y ou must execute COPIER>FUNCTION>CCD>CCD-ADJ before e x- ecuting this mov e.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-66 T EGGN-POS Use it to ex ecute automatic adjustment of the edge gain correction for the CCD. (The edge gain correction of the CCD is ef fectiv e only when the ADF is in use.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-67 T <DENS> Use it to ex ecute automatic density adjustment. Execute this mode after shading correction, and be sure to e xecute all of the follo wing in sequence: WHITE-ME, PD-DENS, PD-ME.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-68 T PD-ME Use it to ex ecute automatic density correction for text mode (to read PD- DENS output).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-69 T <DPC> Use it to ex ecute potential-related operations. D-GAMMA Use it to ex ecute photosensitiv e drum resistance measurement control (APVC).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-70 T <FIXING> Use it to ex ecute fixing assembly-related automatic adjustments. NIP-CHK Use it to obtain output for automatic measurement of the fixing nip width.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-71 T <P ANEL> Use it to check the control panel. LCD-CHK Use it to check the touch panel for missing dots. Using the Mode 1) Select <LCD-CHK> to highlight, and press the OK ke y .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-72 T Input K eys/Indications T05-501-01 COPIER>FUNCTION>P AR T -CHK <P AR T -CHK> Use it to check the operation of a specific load.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-73 T MTR-ON Use it to check the motor .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-74 T Codes and Motors T05-501-03 Codes and Solenoids T05-501-04 Code Name 1 Main.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-75 T <CLEAR> Use it to clear the RAM, jam history , or error code history . The effect does not tak e place unless the main po wer switch has been turned off and then on.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-76 T E355-CLR --- PWD-CLR Use it to clear the password of the system administrator in user mode. Using the Mode 1) Select <PWD-CLR> to highlight, and press the OK ke y .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-77 T <MISC-R> Checking reader unit-related operations. SCANLAMP Use it to check the scanning lamp for activ ation. Using the Mode 1) Select <SCANLAMP> to highlight, and press the OK ke y .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-78 T <MISC-P> Use it to check the operation of the printer unit. P-PRINT Use it to print out the contents of service mode (ADJUST , OPTION, COUNTER).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-79 T HIST -PRT Use it to print out the jam history and the error history stored for service mode. Using the Mode 1) Select the item, and press the OK key .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-80 T MF-ADJ-Y Use it to ex ecute multifeeder horizontal registra tion automatic adjustment. Using the Mode 1) Select the item, and press the OK ke y .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-81 T <SYSTEM> Use it to check system-related operations. DOWNLO AD Use it to switch to system program download mode. Caution • Use it to download the system progra m.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-82 T 6 OPTION Machine Settings Mode 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-83 T BOD Y Use it to make machine-related settings. MODEL-SZ Use it to select the mode of indication by destination and of the ADF origi- nal size detection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-84 T SCANSLCT Use it to enable or disable the original size detection mechanism for the ADF . • When enabled, the scan size is determined in relation to the original size.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-85 T CONFIG Use it to select any of the multiple pieces of f irmware stored on t.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-86 T DECRL-FN Use it to enable or disable deliv ery curl reducing fan.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-87 T COUNTER2 Use it to change the type of soft counter 2 of the control panel to suit the needs of the user .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-88 T TR Y -STP Use it to impose a limit to the number of sheets for stapling in the finisher and to suspend printing if sizes are mixed.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-89 T Soft Counter Specifications The soft counters are classified a follo ws in .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-90 T Y es/No No. Counter 22 9 copy (4C + mono/L) 23 0 copy (4C + mono/S) 23 1 co.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-91 T Y es/No No. Counter 50 5 Bk scan (total 1) copy scan (Bk) 50 6 Bk scan (tot.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-92 T CST Use it to make cassette-related settings.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-93 T ENV1 Use it to register en velope cassette ENV1. Settings 21: COM10, 22: ISO-B5, 23: Monarch, 24: ISO-C5, 25: DL, 26: No. 4 ENV2 Use it to register en velope cassette ENV2.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-94 T AC C Use it to make accessory-related selections. COIN Use it to enable or disable the indication of the coin vendor . • Use it to change the indication for the control card in the control panel for the coin vendor .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-95 T 6.2 FEEDER SIZE-SW Use it to enable or disable detection of mixed original sizes (AB and Inch sizes). Settings 0: disable (default), 1: enable SORTER>OPTION 6.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-96 T 6.4 BOARD MENUE-1 Use it to indicate lev el 1 of the printer settings menu. Settings 0: do not indicate (default), 1: indicate MENUE-2 Use it to indicate lev el 2 of the printer settings menu.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-97 T 7 TEST T est Pr int Mode The follo wing screen will appear in response to C.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-98 T PG Use it to select the type of test print and generate it. TYPE Enter the number or the type of test print you want, and press the OK ke y to generate it.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-99 T NETWORK Use it to check the network-related items for connection. PING Use it to check the connection between machine and the network (TCP/IP only).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-100 T 6) Make the follo wing selections : COPIER>TEST>NETWORK>PING. Then, enter the loop-back address* (127.0.0.1), and press the OK ke y and then the Start key .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-101 T 8 COUNTER Counter Mode The follo wing screen will appear in response to COPIER>COUNTER; lists of items will follo w: F05-801-01 Clearing the Counter Readings 1) Select the item to clear (highlight).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-102 T Guide to the Counters f or P er iodically Replaced P ar ts and Durables Th.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-103 T Le vel 2: PICK-UP Le vel 3: C1 cassette 1 pickup counter C2 cassette 2 pic.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 5 SER VICE MODE 5-104 T Le vel 2: DRBL-1 Le vel 3: PRE-LMP pre-exposure lamp counter TR-R OLL tran.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-1 T 1 Self Diagnosis The machine is equipped with a mechanism that checks the condition of the machine (es- pecially sensor outputs) and indicates an error code in the control panel upon detection of a fault.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-2 T Code Description E716 Communication error (with pedestal) E717 Communicati.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-3 T 1.1 Detail Codes (copier) E000 0000 The reading of the main thermistor does not reach 30°C 1 sec after the main power switch is turned on.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-4 T E001 0000 The main thermistor detects 250°C or higher . 0001 Th e main thermistor or the sub thermistor detects ov erheating (hardware circuit detection).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-5 T E002 0000 Th e temperature of the f ixing film is as follo ws: 1. has exceeded 100°C, but does not rea ch 115°C within 1 sec thereafter .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-6 T E007 0000 An error in the rotation of the f ixing f ilm is detected.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-7 T E010 0000 After the main motor driv e signal is g enerated, the clock signal does to ar - riv e within 1.3 sec . Main cause The main motor (M2) is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-8 T E014 000 After the fixing motor dri ve signal is generated, the clock signal does not arriv e within 1.3 sec. Main cause The fixing motor (M19) is f aulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-9 T E019 0000 The waste toner case is full of w aste toner . Main cause The waste toner case is full. The waste toner case full detection mechanism is soiled.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-10 T E032 0001 The D A unit connection is disconnected (after connection). Main cause The D A unit is faulty . The main controller PCB is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-11 T E051 0000 At start-up, home position is not detected when the horizontal registration assembly is mov ed 100 mm in the direction of home position.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-12 T E064 0000 The presence of a high-v oltage error is communicated by the composite power supply PCB. (The output for primary char ging, de veloping, or trans- fer has deviated from a specif ic level of v oltage.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-13 T E100 0001 The BD signal is not detected 10 times or more within 10 msec in 5 msec after the generation of the laser driv e signal.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-14 T E110 0000 The motor ready signal does not arri v e within 15 sec after the laser scanner motor driv e signal is generated. Main cause The wiring is faulty (short circuit, open circuit, disconnection).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-15 T E202 The home position sensor does not go ON when the main power switch is turned on. 0001 The scanner home position sensor does not go OFF when the scanner is mov ed forward by 40 mm.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-16 T E220 0001 A fault is detected on the in verter PCB for the scanning lamp. Main cause The in ve rter PCB is faulty . The reader controller PCB is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-17 T E240 0000 A fault occurs in communication between the CPU of the main controller PCB and the CPU of the DC controller PCB. Main cause The main controller PCB is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-18 T E248 0001 A dif ference is disco vered betw een the ID in EEPR OM read when the main power switch is turned on and the ID in R OM upon comparison.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-19 T E302 0001 During shading, the shading processing does not end on the reader control- ler PCB after 1 sec. 0002 During stream reading, the edge white addition processing does not end on the rear controller PCB after 10 sec.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-20 T E315 Any of the follo wing is true in the image processing by the main controller: 1. The image data has a fault. 2. The encoding/decoding operation for image data has a fault.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-21 T E601 0000 When an image is transferred between the main controller PCB and the HDD, the main controller PCB detects a fault in control inform ation.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-22 T E602 0001 A mounting f ault of the HDD is detected when the HDD is started up from the BOO T R OM. 0002 A d ata r ead fault of the HDD is detected when the HDD is started up from the BOO T R OM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-23 T E606 0001 A mounting f ault of the HDD is detected when the HDD is started up from the BOO T ROM. Main cause The HDD is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-24 T E677 0001 A fault occurs it the combination betw een an y of the printer boards (acces- sories) and the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-25 T E710 0001 When the main po wer is turned on, the com m unication IC (IPC) on the reader controller PCB cannot be initialized.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-26 T E711 0001 Data is written to the error re gister of the comm unication IC (IPC) on the reader controller PCB four times or more within 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-27 T E712 0001 The communication is not resumed 3 sec or more after data has been writ- ten to the error register of the communication IC (IPC) on the ADF control- ler PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-28 T E713 0000 Th e communication with the f inisher is not resumed 3 sec or more after it is disrupted. Main cause The connector has poor connection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-29 T E716 0000 The ID signal is not detected within a specifi c period of time after the pres- ence of a pedestal is detected. Main cause The connector has poor connection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-30 T E719 0001 Th e communication between the Card Reader-C1 or the coin v endor and the main controller PCB is disrupted. Main cause The wiring is faulty (short circuit, open circuit).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-31 T E733 0001 A fault is detected by the main contr oller PCB in the communication be- tween the DC controller PCB and the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-32 T E740 0001 At p ow er -on, the LAN card has a fault. 0002 The MA C address has a fault. 0003 The LAN card cannot be read. Main cause The LAN card is faulty .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-33 T E743 0000 The reader controller PCB detects a fault in the comm unication between the main controller PCB and the reader controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-34 T E803 0000 The 24V output from the composite main po wer supply PCB is absent for 1 sec or more. Main cause The wiring is faulty (short circuit, open circuit).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-35 T E805 The clock signal is absent for 5 sec or more after the fan dri ve signal has been generated.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-36 T E901 0000 The motor ready signal does not arri v e within 1.3 sec after the pedestal main motor driv e signal is generated. Main cause The connector has poor connector .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-37 T 1.2 ADF Error Codes When the ADF’ s self diagnostic mechanism has gone ON, it may be reset by turning off and then on its host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-38 T 1.3 Saddle Finisher-G1 Error Codes When the finisher’ s self diagnostic mechanism has gone ON, it may be reset by turning off and then on its host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-39 T E514 0001 The deli very belt does not lea ve home position when the stack deliv ery mo- tor is dri ven for 3 sec.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-40 T E537 0001 The aligning plate (front) does not lea ve home position when the alignment motor (front) is dri ven for 3 sec.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-41 T E590 0001 The puncher does not return to home position when the puncher motor is driv en for 250 msec. 0002 The clock from the puncher motor clock sensor is disrupted for 60 msec or more when the puncher motor is dri ven.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-42 T E5F1 0001 The folding roller does not lea ve home position when the stapler/folder mo- tor is dri ven for 1.5 sec. 0002 The folding roller does to return to home position when the stapler/folder motor is driv en for 3.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-43 T 1.4 Finisher-J1 Error Codes When the f inisher’ s self diagnostic mechanism has gone ON, it may be reset by turning off and then on its host machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-44 T E531 0000 The stapling home position sensor (S16) does not go of f 0.5 sec after the stapler motor is rotated CW . The stapling home position sensor (S16) dos not go ON with 0.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 6 SELF DIA GNOSIS 6-45 T E580 0000 The deli ve ry tray upper limit sensor (S13) g oes ON while the deli ve ry tray ascent/descent motor (M5) is in operation.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-1 T 1 Upgrading 1.1 Outline The machine is upgraded either by do wnloading data from a PC or by replacing its DIMM/R OM.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-2 T • Do wnloading in Ser vice Mode T o start do wnload mode, 1) Start service mode. 2) Make the follo wing selection: COPIER>FUNCTION>SYSTEM>DO WNLO AD.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-3 T If you are using a straight Ethernet cable and a HUB, you are encouraged to connect the machine with the PC on a one-on-one basis, outside the user’ s network en vironment.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-4 T Memo Differences in Connection Between Bi-Centronics Cable and Netw ork Cable Ea.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-5 T 1.2 Data Control Y ou must install the files to use (System, R UI, HD Format , BOO T , Language) before ex- ecuting downloading. 1) Start up the Service Support T ool.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-6 T 3) From the Control W ork screen of the f irmw are, select ‘Registering Firmw are’. F07-102-02 4) From the following screen, select ‘Re gister from selected folder’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-7 T 5) Select the driv e to which you hav e inserted the System CD. 6) Select the folder of the suitable version, and click ‘Re gister’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-8 T 1.3 Downloading the System Softw are , R UI, and Language Module 1.3.1 Making Connections The discussions that follow are based on the use of a parallel cable: • Check to make sure that the Processing/Data lamp is OFF .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-9 T 2) Start the machine’ s service mode, and make the following selections: COPIER>FUNCTION>SYSTEM>DO WNLO AD. Then, press ‘OK’ so that the machine will be in do wnload standby mode (notation “STNDBY”).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-10 T 4) If the notation in the upper right of the screen is ‘High-Speed’, go to step 6); if ‘Low- Speed’, go to step 5).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-11 T 6) Click ‘OK’ to start connection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-12 T 8) Select ‘System Software Do wnload’ of the Service Support T ool screen.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-13 T 10) The follo wing screen will appear to indicate the types of software that will be do wn- loaded: “Function: COPY/PRINTER” “NetW are: YES/NO.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-14 T 1.3.3 After Downloading 1) T urn off the machine’ s main power switch, and disconnect its po wer plug. 2) T urn off the PC. 3) Disconnect the parallel cable from the PC and the machine.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-15 T 1.4.2 Connection The follo wing discussions assume the use of a network cable (cross cable).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-16 T 2) Select the correct BOO T , and select an interface (bi-Centronics or Netw ork). (The ex- ample selects iR8500 for BOO T , and Network is selected for Interface.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-17 T 4) Enter the IP address or the host name (here, 172.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-18 T 6) When connection is done, the follo wing screen appears. Click ‘OK’. F07-104-06 7) Select ‘BOO T R OM Download’ on the Service Support T ool screen.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-19 T 8) Select the files for the v ersion in question of the Service Support T ool from ‘list of soft- ware’; then, click ‘Start’ to start do wnloading.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-20 T 1.5 F or matting the HDD If you hav e replaced the HDD, you must format it and then do wnload the system soft- ware, R UI, and language.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-21 T 2) Select ‘HD Format’, and select ‘Connect’. F07-105-02 3) At this time, if the notation in the upper right of the screen is ‘High-Speed’, go to step 5); if ‘Low-Speed’, go to step 4).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-22 T 4) Click ‘change operation mode’ so that the Centronics Communication Mode change screen will appear . Select ‘high-speed’, and click ‘OK’; then, go to step 6).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-23 T 6) When connection is done, the follo wing screen will appear . Select ‘OK’. F07-105-06 7) When the Check screen appears, select ‘Format’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-24 T 8) When the Start Check screen appears, select ‘Start’ to format all partitions. F07-105-08 9) When the Start Check screen appears once again, select ‘Start’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-25 T 10) When formatting is done, the message “Form at Finished” appears. Click ‘OK’. F07-105-10 11) T o continue do wnloading system, select ‘T o Unit Selection Screen’, and click ‘OK’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-26 T 12) When the system downloading ends, install the R UI and the Language module in the same way . F07-105-12 1.5.3 P oints to Note When Formatting the Hard Disk 1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-27 T 1.6 Downloader PCB 1.6.1 Pur pose Used for upgrading the CPU mounted on the option’ s PCB (For D ADF-H1/Finisher-J1).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-28 T 1.6.3 Download Procedure a. Connecting to the option 1) T urn off the copier . 2) Detach the ADF or Finisher PCB cover . 3) Insert cable B (7pin) into ADF controller PCB (J9) or Finisher controller PCB (J12).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-29 T b . Downloading 1) Start the service support tool. 2) Choose “Downloading/Uploading. ” F07-106-03 3) Press the ST AR T/STOP ke y .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-30 T 5) Get ready for downloading as instructed on the screen. Click OK to proceed further . F07-106-05 6) Choose the R OM ve rsion to download.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-31 T 7) Click ST AR T to let the PC and the downloader PCB to start do wnloading the program. F07-106-07 8) Click OK when the download completes.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-32 T 9) Exit as instructed on the screen. F07-106-09 1.6.4 Disconnecting 1) Press the ST A R T/STOP ke y . The LO AD LED goes of f. 2) T urn off the copier .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-33 T 1.7 Upgrading b y Replacing the DIMM/ROM The following items may be upgraded by.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-34 T 2 Backing Up Data 2.1 Outline Using the Service Support T ool, you can back up the data of the SRAM mounted to the main controller PCB.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-35 T 2.2 Backing Up Data 2.2.1 Making Preparations • Install the system software to the Service Support T ool, making sure that its v ersion is the same as that of the machine in question.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-36 T 2.2.3 Backing Up Data 1) Under ‘Downloading/Uploading’, select ‘T o Next’. F07-202-01 2) Select ‘SYSTEM’, and select ‘Connect’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-37 T 3) At this time, if the notation in the upper right of the screen is ‘High-Speed’, go to step 5); if ‘Low-Speed’, go to step 4).
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-38 T 5) Click ‘OK’ to start connection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-39 T 7) Select ‘Upload the Backup Data’ on the Service Support T ool screen. F07-202-07 8) Select ‘ AL L ’, and select ‘Start Storing’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-40 T 9) See the progress bar , indicating the progress of the save operation. 10) Select the driv e to sav e the data to, and enter the f ile name; the, select ‘Sav e’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-41 T 2.2.4 Downloading Backup Data 1) Under ‘Downloading/Uploading’, select ‘T o Next’. F07-202-11 2) Select ‘SYSTEM’, and select ‘Connect’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-42 T 3) Select ‘OK’, and start connection.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-43 T 5) Select ‘Download the backup Data’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-44 T 7) See the progress bar , indicating the progress of the downloading operation. At the end, the following screen will appear . Select ‘OK’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-45 T 2.2.5 Managing Backup Data Y ou can delete backup data that has become obsolete as follo ws: Y ou need not connect a PC to the machine to do so.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-46 T 3) Select the file to delete from the list of ‘Backup Data Stored on Computer’; then select ‘Remove’.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 CHAPTER 7 UPGRADING 7-47 T 5) When the Delete Finish screen appears, click ‘OK’. Make the follo wing selections to end the Service Support T ool: Return to Previous Screen>Return to Main Menu>Ending the Service Support T ool>End.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 APPENDIX.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-1 A. General Timing Char t General Timing Char t (printer unit) • A4, 2 sheets, Single-sided, Direct, .
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-2 General Timing Char t (reader unit w/ ADF) • A4, 2 sheets, Signal-sided, Direct • A4, 1 sheet, Dou.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-3 B . General Circuit Diagr am N M L K J I H G F E D C B A N M L K J I H G F E D C B A 1 2 3 4 5 6 7 8 9.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-5 13 12 11 10 9 8 7 6 5 4 3 2 1 H G F E D C B A LED100D SW100D POPD* Side deck drier PCB Lattice connect.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-6 D . 2-Cassette F eeding Unit-W1 General Circuit Diag ram 12 11 10 9 8 7 6 5 4 3 2 1 H G F E D C B A S1.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 A-7 E. Inner 2-W a y T ra y-A1 General Circuit Diagra m 1 1 1 0 987654321 H I J K G F E D C B A Name 2-way delivery inlet motor 2-way delivery outlet motor No.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 APPENDIX A-8 Remarks Used when making electrical checks. Used when positioning the No. 1/No. 2 mirror . Used when adjusting/ checking images. Used when making electrical checks.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 APPENDIX A-9 Remarks Used when making electrical checks. No. 6 Name T ester extension pin (L-shaped) T oll No. FY9-3039 Shape Rank A Rank: A: each service person is expected to carry one.
COPYRIGHT © 2001 CANON INC . 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV .0 MAR. 2001 APPENDIX A-10 No. 1 2 3 4 5 6 G. List of Solvents/Oils Name Alcohol Solvent Heat resisting grease Lubricant Lubricant Lubricant Uses Cleaning: e.g., glass, plastic, rubber parts; external co vers.
Prepared by Office Imaging Pr oducts Quality Assurance Center CANON INC. Printed in U.S.A. REVISION 0 (MAR. 2001) (18723/18756/22109/32205/35338) 5-1, Hakusan 7-chome, T oride-shi, Ibaraki 302-8501 Japan COPYRIGHT © 2001 CANON IN C . CANON iR2200/iR2800/iR3300 RE V .
PRINTED IN U.S.A. (IMPRIME A U U.S.A. ) 0401M0.7-1 This publication is printed on 100% recycled paper ..
An important point after buying a device Canon IR3300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon IR3300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon IR3300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon IR3300 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon IR3300 will certainly help you make a decision on the purchase.
If you already are a holder of Canon IR3300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon IR3300.
However, one of the most important roles played by the user manual is to help in solving problems with Canon IR3300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon IR3300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
